K1610 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Applications: Phase Locked Loops Clocking “Sync” to NTSC Video Standards; Reference Signal; Signal Tracking ±10ppm Stability -40°C to 85°C Op. Temperature “Clipped” Sine Wave Output Non Hermetic Package ELECTRICAL SPECIFICATIONS 800-888-1499 or www.champtech.com Model K1610 Frequency Range (MHz) Input Current (mA) 1 to 27 < 2 Frequency Control Function Frequency Stability (ppm) Overall Temperature Range (oC) ±10ppm (Inclusive of Calibration, Temperature, Voltage, Load and 10 yr.Aging) Operating Storage -40oC to +85oC Supply Voltage (V) Start Up Time (ms) +5V ±5% <10 (For Custom Deviation Range, Vc Range, etc. - Consult Factory) Output (“Clipped” Sine Wave) 1.0V p-p min., 10KΩ/10pF -40oC to +85oC PART NUMBERING GUIDE K1610 - Specify Frequency K1610 Series 5V Voltage Controlled Temperature Compensated Crystal Oscillators 25oC Calibration Over Operating Temperature ±1ppm ±3ppm Aging 1st Year ±1ppm Voltage Control Included Minimum Deviation (ppm) ±28 Modulation Bandwidth (3dB) Control Voltage Range (V) Transfer Function Positive 0.5 to 4.5 Input Impedance > 50KΩ @ 10KHz Minimum Deviation Sensitivity (ppm/V) +14 > 20KHz Linearity (%) <10 Nominal Control Voltage (V) 2.5 Typical SSB Phase Noise (dBC/Hz) Offset From Carrier -7010Hz 100Hz -95 1KHz -120 10KHz -140 100KHz -150 Manual Adjustment (ppm) ±5 min.
Gnd/ & Case Gnd Output + VCC 800-888-1499 or www.champtech.com K1610 Series 5V Voltage Controlled Temperature Compensated Crystal Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 260°C; 10 seconds: 1 inch/sec. Lead tension & bend stress Resistance to solvents 1500 g’s MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210A, Cond. C MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST CIRCUIT DIAGRAM