K1300 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
! TTL/CMOS Compatible ! Tri-State Feature for Auto Test Systems ! Fast Rise and Fall Times ! 70 to 120 MHz Frequency Range ! Tight Symmetry (45/55%) Available ! ±100ppm Stability Standard ±50ppm Stability Available - K1350 800-888-1499 or www.champtech.com /MT75/MT49/MT51/MT48/MT48 /MT49/MT48/MT48/MT46/MT48/MT48/MT48/MT32/MT77/MT72/MT90 /MT67/MT84/MT73/MT32/MT68/MT65/MT84/MT69/MT32/MT67/MT79/MT68/MT69/MT54/MT44/MT50/MT50/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT50/MT48/MT44/MT56/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT49/MT51/MT44/MT50/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT80/MT73/MT78/MT32/MT49 MODEL K1300 Frequency Range (MHz) 70 to 120 Frequency Stability (ppm) Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±100 Temperature Range (°C) Operating 0°C to +70°C Storage -55°C to +125°C Supply Voltage (V) +5.0 ±5% Output TTL Output CMOS ELECTRICAL SPECIFICATIONS Start up Time (ms) PART NUMBERING GUIDE K13XXXX - Specify Frequency Blank = TTL Output C = CMOS Output Blank = 40/60% Symmetry S = 45/55% Symmetry (Available to 100MHz. 00 = ±100ppm Stability 50 = ±50ppm K1300 Series 5V Crystal Clock Oscillators Input Current (mA) 50 -80 max Symmetry (%) 40/60 @ 1.4V Symmetry (%) TR and TF (ns) 40/60 @ 0.5VCC 5 (20% -80 % VCC) Input Current (mA) K1350 ±50 TR and TF (ns) 5 (0.5V to 2.5V) Fanout 10 100 max TTL <10 CMOS <45
800-888-1499 or www.champtech.com OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM K1300 Series 5V Crystal Clock Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15gs; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 235°C; 30 seconds Lead tension & bend stress Resistance to solvents 1500 gs MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210D, Cond. J MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS PIN FUNCTION Tri-State*1 Ground Output 4 + VCC SHIPPING TUBE CROSS SECTION * Input tied internally to +5V. External input if any, should not be less than +3V and not greater than +3.8V for TTL version. For CMOS models, enable with either an open circuit or +5V.