K1149 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
! 4-pin Package, Compatible with 14-pin DIL ! 40 to 160MHz Frequency Range (Discrete Higher Frequencies Available ! Designed to Drive Standard ECL 10K and 10KH Families ! ECL and PECL Options Available ! Dual Complementary Output Available ! 50Ω Drive Capability ! Internal 470W Output Pull-Down Resistor Available 800-888-1499 or www.champtech.com MODEL See Part Numbering Guide Below Frequency Range (MHz) 40 to 160 Frequency Stability (ppm) Overall Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±100 Temperature Range (°C) Operating 0°C to +70°C Storage -55°C to +125°C Supply Voltage (V) Supply Current (mA) ELECTRICAL SPECIFICATIONS Start up Time (ms) <10 K1149 Series 5V Crystal Clock Oscillators /MT75/MT49/MT49/MT52/MT57 /MT49/MT48/MT48/MT46/MT48/MT48/MT48/MT32/MT77/MT72/MT90 /MT67/MT84/MT73/MT32/MT68/MT65/MT84/MT69/MT32/MT67/MT79/MT68/MT69/MT54/MT44/MT50/MT50/MT42/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT50/MT48/MT44/MT56/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT49/MT51/MT44/MT50/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT80/MT73/MT78/MT32/MT49 Typical 28; 55 on R-Suffix (Option 3) Jitter (Typical) 5ps RMS @ 40MHz PIN K1149AB K1149AC K1149AM PART NUMBERING GUIDE (Use this chart for ordering) Case GND N/C N/C VSS VEE ECL Out VEE ECL Out VSS & Case GND ECL Out VEE Maximum 60; 90 on R-Suffix (Option 3) Frequency (MHz) Option 40 to 160 2, 3 VSS & Case GND K1149AA Case GND VEE ECL Out VSS K1149BA K1149BC K1149BM K1149CA Higher Frequency Available (MHz) 180, 200, 220 -5.2 ± 5% +5.0 ± 5% ECL (VEE) PECL (VCC) Comp. Out VSS & Case GND PECL Out VCC Comp Out VEE ECL Out VSS & Case GND Comp Out VSS & Case GND ECL Out VEE N/C VEE & Case GND PECL Out VCC 40 to 125 1, 2, 3 Options Available 1. Optional +5.0 ± 10% Operation at V SS 2. 50ppm (K1149XX5 available only in frequency range of 40MHz to 160MHz 3. Optional internal pull down resistor available only in the range of 40MHz to 160MHz - K1149XX-R *> 140MHz (Height) = 8,51mm Max
800-888-1499 or www.champtech.com OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM K1149 Series 5V Crystal Clock Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15gs; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 235°C; 30 seconds Lead tension & bend stress Resistance to solvents 1500 gs MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210D, Cond. J MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS Parameter Symbol Units Test Condition Min. Typ. Max. Ground Reference Power Supply (PECL) 0 Level 1 Level Rise Time Fall Time Overlap Symmetry VSS VCC VOL VOH TR TF TOL S Volts Volts Volts Volts ps ps ps Reference Reference 50Ω into VCC-2 50Ω into VCC-2 50Ω into, 20% to 80% 50Ω into, 80% to 20% 50% VCC -1.3 4.75 5.0 5.25 VCC-1.95 V CC-1.6 VCC-1.02 V CC-1.74 2.0 2.0 1.0 40 60 1.0 Test Condition Reference N/A 50Ω into VSS-2 50Ω into VSS-2 50Ω into, 20% to 80% 50Ω into, 20% to 80% Power Supply (ECL) VEE Volts Reference 50% VSS -1.3 PECL Specifications ECL Min. Typ. Max 1.0 -5.2 N/A VSS-1.95 V SS-1.6 VSS-1.02 V SS-0.74 1.0 2.0 1.0 2.0 1.0 40 60 Specifications