K1110D MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
! Applications: Wide Area Networks (WANs) Reference Clocking ! Superior Tolerance Performance Including up to 10 years of aging ! 2.0 to 35.0 MHz Frequency Range ! ±10ppm ±20ppm Stability Options ! -40°C to 85°C Operating Temperature - K1120D ! 0°C to 70°C Operating Temperature - K1110D ! Meets Stratum IV Requirements ! Enable/Disable Option Available ELECTRICAL SPECIFICATIONS 800-888-1499 or www.champtech.com /MT75/MT49/MT49/MT88/MT48/MT68/MT65 /MT51/MT51/MT46/MT51/MT51/MT48/MT32/MT77/MT72/MT90 /MT67/MT84/MT73/MT32/MT68/MT65/MT84/MT69/MT32/MT67/MT79/MT68/MT69 /MT55/MT44/MT52/MT57/MT32/MT109 /MT109/MT32/MT77/MT97/MT120/MT46/MT50/MT48/MT44/MT56/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT49/MT51/MT44/MT50/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT80/MT73/MT78/MT32/MT49 Model K1110DA Frequency Range (MHz) Input Current (mA) 2 to 35 < 30 Frequency Stability (ppm) Overall Temperature Range (oC) Inclusive of Calibration, Temperature, Voltage, Load, Aging Operating Storage 0oC to +70oC -40oC to +85oC Supply Voltage (V) Start Up Time (ms) +5.0V ±5% <10 -40oC to 85oC Symmetry CMOS/TTL 45/55 < 16MHz; 40/60 ≥ 16MHz Aging @ 50oC (10 Years) Inclusive K1110D & K1120D Series 5V Crystal Clock Oscillators K1120DAM 0oC to 70oC ±10 - ±20 ±3.0 -40oC to +85oC PART NUMBERING GUIDE K11X0DAX X - Specify Frequency Blank = Fixed Frequency E = Enable/Disable Blank = 0°C to 70°C Operating Temp. M = -40°C to +85°C Operating Temp. Model Selection: See Table Above 0.5 max. 4.5 min < 5 0 Level (VOL) 1 Level (VOH) Rise Time & Fall Time (ns)
Gnd/ & Case Gnd Output + VCC 800-888-1499 or www.champtech.com K1110D & K1120D Series 5V Crystal Clock Oscillators SHIPPING TUBE CROSS SECTION TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-202, Mtd 213, Cond. D -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 202, Mtd 204, Cond. B 10-2000 Hz; 0.06 inch; 15g; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. A Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 260°C; 10 seconds: 1 inch/sec. Lead tension & bend stress Resistance to solvents 500 gs MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210A, Cond. C MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM