K1052E70AP

K3002G LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

Applications

Suitable for high voltage power supplies, natural gas igniters, high-pressure Sodium lamps, and Xenon flash ignition. AC Circuit Oriented

• Triggering Voltage of 79V to 330V
• RoHS Compliant Symbol Parameters Test Conditions Min Max Unit VBO Breakover/Trigger Voltage K0900y 79 97 V K1050y 95 113 K1100y 104 118 K1200y 110 125 K1300y 120 138 K1400y 130 146 K1500y 140 170 K1800y 165 195 K200zy 190 215 K220zy 205 230 K240zy 220 250 K250zy 240 280 K300zy 270 330 VDRM Repetitive Peak Off-state Voltage K0900y 70 V K1050y 90 K1100y 90 K1200y 90 K1300y 90 K1400y 90 K1500y 90 K1800y 140 K200zy 180 K220zy 180 K240zy 190 K250zy 200 K300zy 200 Electrical Specifications (TJ = 25°C, unless otherwise specified) Note: xxx = voltage, z = circuit function, y = package

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series Electrical Specifications (TJ = 25°C, unless otherwise specified) Symbol Parameters Test Conditions Min Max Unit IT(RMS) On-state RMS Current 50/60Hz, TJ < 125°C 1 A IDRM Repetitive Peak Off-state Current V = VDRM 50/60Hz Sine Wave 5 μA VTM Peak On-state Voltage IT = 1A Kxxx0y 1. 5 VKxxx2y 3.0 IH Dynamic Holding Current RL = 100Ω 50/60Hz Sine Wave 150 mA RS (VBO – VS) (IS – IBO) 50/60Hz Sine Wave 100 Ω IBO Breakover Current 50/60Hz Sine Wave 10 μA ITRM Peak Repetitive Pulse Current (refer to figure 4) tp = 10μs 60Hz 80 A5Hz 160 ITSM Peak Non-repetitive Surge Current (refer to figure 5) Single Cycle 60Hz 20 A50Hz 16.7 di/dt Critical Rate of Rise of On-state Current 150 A/μs dv/dt Critical Rate of Rise of Off-state Voltage 1500 V/μs TS Storage Temperature Range -40 150 °C TJ Junction Temperature Range -40 125 °C RθJL Thermal Resistance, Junction to Lead DO-15 18 °C/WDO-214 (1) 30 RθJC Thermal Resistance, Junction to Case TO-92 35 °C/W RθJA Thermal Resistance, Junction to Ambient DO-15 75 °C/WTO-92 95 Notes: xxx = voltage, z = circuit function, y = package (1) Mounted on 1 cm2 copper foil surface; two-ounce copper foil

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series V DC(IN) ≥ V B0 V C I L R L R SIDAC (a) Circuit R max ≤ V IN - V BO I BO R min ≥ V IN - V TM I H (MIN) (b) WaveformsV BO V C I L t t C Figure 13: Relaxation Oscillator Using a SID AC Figure 14: Low -voltage Input Circuit for Gas Ignition 4.7 µF

100 V10 µF

24 V ac

4.7 µF 100 V ½ W K1200E Sidac 200 V H.V. Ignitor 1.2 µF 4.7 k- + - + 100-250 V ac 60 Hz 100-250 V ac 60 Hz SCR Sidac Sidac

120 V ac

3.3 k 0.47 µF 400 V Ballast Sidac

220 V ac

7.5 k 0.22 µF Ballast Lamp

120 V ac 220 V ac

Figure 15: Comparison of SID AC versus SCR for Gas Ignitor Circuit Figure 17: T ypical High-pr essure Sodium Lamp Firing Circuit Figure 16: Xenon Lamp Flashing Cir cuit - + Xenon Lamp K2200G 10 µF 2 W 10 µF 450 V 4 kV 0.01 µF 400 V 20 M Sidac 200- 400 V 100 250 V Trigger Transformer 20:1

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series Soldering Parameters Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Physical Specifications Reliability/Environmental T ests Test Specifications and Conditions High T emperature Voltage Blocking MIL -STD-750: Method 1040, Condition A Rated V DRM (VAC-peak), 125°C, 1008 hours T emperature Cycling MIL -STD-750: Method 1051 -40°C to 150°C, 15-minute dwell, 100 cycles Biased T emperature & Humidity EIA/JEDEC: JESD22-A101 80% min V BO (VDC), 85°C, 85%RH, 1008 hours High T emp Storage MIL -STD-750: Method 1031 150°C, 1008 hours Low-T emp Storage -40°C, 1008 hours Thermal Shock MIL -STD-750: Method 1056 0°C to 100°C, 5-minute dwell, 10-second transfer, 10 cycles Autoclave (Pressure Cooker T est) EIA/JEDEC: JESD22-A102 121°C, 100%RH, 2atm, 168 hours Resistance to Solder Heat MIL -STD-750: Method 2031 260°C, 10 seconds Solderability ANSI/J-STD-002: Category 3 Lead Bend MIL -STD-750: Method 2036, Condition E T erminal Finish 100% Matte Tin Plated / Pb-free Solder Dipped Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Overheating and surge currents are the main killers of SIDACs. Correct mounting, soldering, and forming of the leads also help protect against component damage.

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series Dimensions — DO-214 Dimension Inches Millimeters Max Max Min Max A 0.130 0.156 3.30 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1 .95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1 .60 F 0.075 0.096 1 .90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1 .95 2.65 K 0.006 0.016 0.15 0.41 0.079 (2.0) 0.110 (2.8) 0.079 (2.0) H K E F G AC B D Case Temperature Measurement Point Soldering Pad Outline inch (millimeter) Recommended Dimension Inches Millimeters Max Max Min Max ØB 0.028 0.034 0.711 0.864 ØD 0.120 0.140 3.048 3.556 G 0.235 0.270 5.969 6.858 L 1 .000 25.400 Dimensions — DO-15 L LG ØD ØB Temperature Measuring Point

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series Dimension Inches Millimeters Max Max Min Max A 0.176 0.196 4.47 4.98 B 0.500 12.70 D 0.095 0.105 2.41 2.67 E 0.150 3.81 F 0.046 0.054 1. 16 1 .37 G 0.135 0.145 3.43 3.68 H 0.088 0.096 2.23 2.44 J 0.176 0.186 4.47 4.73 K 0.088 0.096 2.23 2.44 L 0.013 0.019 0.33 0.48 M 0.013 0.017 0.33 0.43 N 0.060 1 .52 Dimensions — TO-92 with T ype 70 Lead Form A B MT2 MT1 E H G F D K J L M N Temperature Measuring Point Notes: 1 . Type 70 lead form as shown is standard for the E package. 2. All leads are insulated from case. Case is electrically nonconductive (rated at 16000V ac rms for one minute from leads to case over the operating temperature range.) 3. Mold flash shall not exceed 0.13 mm per side. Product Selector Part Number Switching Voltage Range Blocking Voltage Packages VBO Minimum V BO Maximum V DRM DO-15 DO-214 TO-92 K0900y 79V 97V 70V K0900G K0900S K0900E70 K1050y 95V 113V 90V K1050G K1050S K1050E70 K1100y 104V 118V 90V K1100G K1100S K1100E70 K1200y 110V 125V 90V K1200G K1200S K1200E70 K1300y 120V 138V 90V K1300G K1300S K1300E70 K1400y 130V 146V 90V K1400G K1400S K1400E70 K1500y 140V 170V 90V K1500G K1500S K1500E70 K1800y 165V 195V 140V K1800S K2000y 190V 215V 180V K2000G K2000S K2000E70 K2002y 190V 215V 180V K2002G K2200y 205V 230V 180V K2200G K2200S K2200E70 K2202y 205V 230V 180V K2202G K2400y 220V 250V 190V K2400G K2400S K2400E70 K2402y 220V 250V 190V K2402G K2500y 240V 280V 200V K2500G K2500S K2500E70 K2502y 240V 280V 200V K2502G K3002y 270V 330V 200V K3002G Note: y = package

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series Packing Options Part Number Marking Weight Packaging Mode Base Quantity Kxxx0G Kxxx0G 0.38g Bulk 1000 Kxxx0GRP Kxxx0G 0.38g Reel Pack 5000 Kxxx2G Kxxx2G 0.38g Bulk 1000 Kxxx2GRP Kxxx2G 0.38g Reel Pack 5000 Kxxx0SRP KxxS 0.1g Reel Pack 2500 Kxxx0E70 Kxxx0E 0.17g Bulk 2000 Kxxx0E70AP Kxxx0E 0.17g Ammo Pack 2000 Kxxx0E70RP2 Kxxx0E 0.17g Reel Pack 2000 Kxxx0E70RP3 Kxxx0E 0.17g Reel Pack 2000 Note: xxx or xx = voltage DO-214 Embossed Carrier Reel Pack (RP) Specifications 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.157 (4.0) 0.49 (12.4) 0.512 (13.0) Arbor Hole Dia . 12.99 (330.0) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series DO-15 Reel Pack (RP) Specifications 3.15 (80.0) TYP DO-15 Dimensions are in inches (and millimeters). Direction of Feed 0.252 (6.4) 0.898 (22.8) 0.197 (5.0) 2.063 (52.4) 10.0 - 14.0 (254.0 - 356.0) DO-15 Ammo Pack (AP) Specifications Direction of Feed Dimensions are in inches (and millimeters).9.8 (250.0) 4.53 (115.0) 3.27 (80.0) DO-15 0.252 (6.4 ) 0.898 (22.8) 0.197 (5.0) 2.063 (52.4)

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series TO-92 T ype 70 Reel Pack (RP2) Radial Leaded Specifications Flat Down 1.30 (33.0) 0.708 (18.0) 0.354 (9.0) 0.236 (6.0) 0.02 (0.5) 0.50 (12.7) 14.17 (360.0) 0.20 (5.08) 0.125 (3.2) MAX 0.91 (23.2) 1.97 (50.0) 0.50 (12.7) 0.25 (6.35) Dimensions are in inches (and millimeters). Direction of Feed 0.157 DIA(4.0) TO-92 T ype 70 Reel Pack (RP3) Radial Leaded Specifications Flat Up 0.708 (18.0) 1.3 (33.0) 0.5 (12.7) 0.1 (2.54) 0.354 (9.0) 0.236 (6.0) 0.02 (0.5) Direction of Feed Dimension s are in inches (and millimeters). 1.97 (50.0) 14.17 (360.0) 0.91 (23.2) 0.157 DIA(4.0)

Revised: December 9, 2011 01:32 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Standard Bidirectional SIDACs Kxxxzy Series Part Numbering System Part Marking System K 240 0 E 70 RP DEVICE TYPE K: Sidac VOLTAGE RATING 090: 79 –9 7V 105: 95 –1 13V 110: 104 – 118V 120: 110 – 125V 130: 120 – 138V 140: 130 – 146V 150: 140 – 170V 180: 165 – 195V 200: 190 – 215V 220: 205 – 230V 240: 220 – 250V 250: 240 – 280V 300: 270 – 330V CIRCUIT FUNCTION 0: Standard 2: Two Series Die PACKAGING OPTIONS [blank]: Bulk AP: Ammo RP: Reel LEAD FORM DIMENSIONS xx: Lead Form Option PACKAGE TYPE G: DO-15 S: DO-214 E: TO-92 YMXXX K24S DO-214AA K2400G YMXXX DO-15 TO-92 K2400E YMLXX TO-92 T ype 70 Ammo Pack (AP) Radial Leaded Specifications Flat do wn

25 Devices per f old

0.708 (18.0) 0.91 (23.2) (33.0) MAX 0.50 (12.7) 0.354 (9.0) 0.236 (6.0) 0.02 (0.5) 0.20 (5.08) 0.50 (12.7) 0.25 (6.35) Directionof Feed Dimension s are in inches (and millimeters). 1.85 (47.0) 13.3 (338.0) 12.2 (310.0) 1.85 (47.0) 0.157 DIA(4.0)