K100_V02 BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Features
High Daylight Visibility, Programmable Multicolor Indicator with Optional Audible Alarm for Indoor or Outdoor Use Highly visible indicator provides bright, even light in direct sunlight Three colors in one device Programmable using Banner's Pro Editor software and Pro Converter Cable 36 mm threaded polycarbonate base Rugged IP66 and IP69K per DIN 40050-9, UL Type 4X housing PNP or NPN operation depending on wiring Variety of connector options Rugged UV-stabilized polycarbonate base and window
12 V DC to 48 V DC operating voltage
Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. Full Preview Connection (Required) The full preview connection must be used for the K100 Pro Beacon. A B C E D F A = Pro Converter Cable (MQDC-506-USB) B = Splitter (CSB-M1251FM1251M) C = PC running Pro Editor software D = Any Banner Pro Series-enabled device (K50 shown) E = Power Supply (PSW-24-1 or PSD-24-4) F = 8-Pin to 5-Pin Double-Ended Cordset (MQDC-801-5M-PRO), required for 8-Pin models Models Standard models shown. Contact factory for other options. © Banner Engineering Corp.
May 26, 2023page 2 K100 Pro Daylight Visible Beacon – DC Datasheet Three Color Models. Other available color options: Blue and White Family K100 Blank = 2 m integral PVC cable Q = 5-pin integral M12 quick disconnect M12 quick disconnect Q Connector * P Style Color 1 G G = Green Color 2 Y R = Red Color 3 R Audible A Blank = None * Models with a quick disconnect require a mating cordset One Color Models. Other available color option: Red Family K100 Blank = 2 m integral PVC cable Q = 5-pin integral M12 quick disconnect M12 quick disconnect Q Connector * P Style Color Y Audible A Blank = None * Models with a quick disconnect require a mating cordset Wiring PNP Input NPN Input Key A 12–48 V DC A 12–48 V DC 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray An "X" denotes an active input. For example: When Input 1 and Input 3 are both active, the indicator will be Color 1 Flashing at 1 Hz. Default Configuration: Three Color Models Wiring Operating Mode/Function Black (Input Brown (Input White (Input 3) Gray (Input Non-Audible Audible X Color 1 Steady Color 1 Steady X Color 2 Steady Color 2 Steady X Color 3 Steady Color 3 Steady X X Color 1 Flashing at 1 Hz Color 1 Flashing at 1 Hz X X Color 2 Flashing at 1 Hz Color 2 Flashing at 1 Hz X X Color 3 Flashing at 1 Hz Color 3 Flashing at 1 Hz X X X Color 3, 3-pulse Strobe Color 3, 3-pulse Strobe X Off Audible Steady, Frequency 2.5 KHz, Volume High X X Color 1 Steady Color 1 Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X Color 2 Steady Color 2 Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X Color 3 Steady Color 3 Steady, Audible Steady, Frequency 2.5 KHz, Volume High Continued on page 3 © Banner Engineering Corp.
K100 Pro Daylight Visible Beacon – DC Datasheet May 26, 2023 page 3 Continued from page 2 Wiring Operating Mode/Function Black (Input Brown (Input White (Input 3) Gray (Input Non-Audible Audible X X X Color 1 Flashing at 1 Hz Color 1 Flashing at 1 Hz, Audible Steady, Frequency 2.5 KHz, Volume High X X X Color 2 Flashing at 1 Hz Color 2 Flashing at 1 Hz, Audible Steady, Frequency 2.5 KHz, Volume High X X X Color 3 Flashing at 1 Hz Color 3 Flashing at 1 Hz, Audible Steady, Frequency 2.5 KHz, Volume High X X X X Color 3, 3-pulse Strobe Color 3, 3-pulse Strobe, Audible Steady, Frequency 2.5 KHz, Volume High Default Configuration: One Color Models Wiring Operating Mode/Function Black (Input Brown (Input White (Input 3) Gray (Input Non-Audible Audible X Color 1 Flashing at 1 Hz Color 1 Flashing at 1 Hz X Color 1 Steady Color 1 Steady X Color 1 Rotate Color 1 Rotate X X Color 1 Flashing at 5 Hz Color 1 Flashing at 5 Hz X X Color 1 Flashing at 0.5 Hz Color 1 Flashing at 0.5 Hz X X Color 1 Strobe Color 1 Strobe X X X Color 1, 3-pulse Strobe Color 1, 3-pulse Strobe X Off Audible Steady, Frequency 2.5 KHz, Volume High X X Color 1 Flashing at 1 Hz Color 1 Flashing at 1 Hz, Audible Steady, Frequency 2.5 KHz, Volume High X X Color 1 Steady Color 1 Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X Color 1 Rotate Color 1 Rotate, Audible Steady, Frequency 2.5 KHz, Volume High X X X Color 1 Flashing at 5 Hz Color 1 Flashing at 5 Hz, Audible Steady, Frequency 2.5 KHz, Volume High X X X Color 1 Flashing at 0.5 Hz Color 1 Flashing at 0.5 Hz, Audible Steady, Frequency 2.5 KHz, Volume High X X X Color 1 Strobe Color 1 Strobe, Audible Steady, Frequency 2.5 KHz, Volume High X X X X Color 1, 3-pulse Strobe Color 1, 3-pulse Strobe, Audible Steady, Frequency 2.5 KHz, Volume High Specifications Supply Voltage and Current
12 V DC to 48 V DC
Product approved with usage of Class 1 or Class 3 Power Supply to achieve Class 2 Power Supply status Use only with a suitable Class 2 power supply (North Ameri- ca) Maximum Current (mA) Supply Volt- age (V DC) Steady On, Flash, or Strobe Function(1) Rotate Function Light Only Light & Audi- ble Light Only Light & Audi- ble 12 760 820 365 435 18 495 530 235 275 24 395 425 185 220 30 340 365 165 195 36 305 330 150 180 42 280 305 145 170 48 260 285 140 165 (1) Flash or Strobe Mode: Peak current, operating at 50% duty cycle or less. Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Indicator Response Time On response: 325 ms (max) Off response: 20 ms (max) Connections Integral 5-pin M12 male quick-disconnect connector, 150 mm (6 in) PVC-jacketed cable with an M12 quick disconnect, or 2 m (6.5 ft) integral PVC-jacketed cable, depending on model Models with a quick disconnect require a mating cordset Mounting M36 by 2.0 threaded base, maximum torque 5.0 N·m (44 inch-lbf) Interior 3/4-14 NPT Thread Mounting nut included Adjacent Unit Mounting Separation Distance Minimum: 0 in (mounted with unit flanges touching) © Banner Engineering Corp.
May 26, 2023page 4 K100 Pro Daylight Visible Beacon – DC Datasheet Audible Characteristics Sound Intensity at 2.5 KHz, at 1 m (typical): Low volume setting: 93 dB Medium volume setting: 96 dB High volume setting: 101 dB Construction Base, Dome, and Nut: Polycarbonate Operating Conditions 90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms dura- tion, half sine wave) Impact: IK10 (60068-2-75) Environmental Rating IP66, IP69K per DIN 40050-9, UL Type 4X LED Lifetime Lumen maintenance L70 When operating within specifications, output decreases less than 30% after 42,000 hours Pro Editor Configuration Connection to Pro Editor software enables control of: Animation: On, Flash, Rotate, Two Color Flash, Two Color Cycle, Intensity Sweep Color: Green, Yellow, Red, Blue, White Wiring: See "Wiring" on page 2 Intensity: Low, Medium, High Speed: Slow, Standard, Fast Slow Flash: 0.5 Hz Standard Flash: 1.0 Hz Fast Flash: 5.0 Hz Slow Rotate: 80 rpm Standard Rotate: 120 rpm Fast Rotate: 160 rpm Audible Tones: Pulse, Wobble, Strobe, Whoop, Stac- cato, Siren, Continuous 1, Continuous 2, Jingle, Melody 1, Melody 2, Melody 3 Pro Converter Cable required to interface between PC and in- dicator, see accessories Default Indicator Characteristics At 12 V DC Color Dominant Wavelength (nm) or Color Tempera- ture (CCT) Color Coordi- nates(1) Lumen Output (Typical at 25 °C) x y Green 528 nm 0.1603 0.6973 360 Yellow 589 nm 0.5557 0.4276 525 Red 625 nm 0.6999 0.2982 155 Blue 475 nm 0.1167 0.1121 165 White 5500K ± 250 0.3320 0.3433 600 Lumen Output decreases by 15% at 48 V DC Internal temperature compensation circuitry: Reduces the Lu- men Output to decrease the unit internal operating tempera- ture. The amount of reduction is dependent on the ambient operating temperature, supply voltage, color, and/or audible functions being utilized. Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in ac- cordance with local and national electri- cal codes and regulations. Overcurrent protection is required to be provided by end prod- uct application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (A) Supply Wiring (AWG) Required Overcurrent Protection (A) 20 5.0 26 1.0 22 3.0 28 0.8 24 1.0 30 0.5 Certifications Banner Engineering BV Park Lane, Culliganlaan 2F bus 3
1831 Diegem, BELGIUM
(1) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. Photometric Data Multiply the values shown in the chart by the maximum candela values in the Max. Candela table: © Banner Engineering Corp.
K100 Pro Daylight Visible Beacon – DC Datasheet May 26, 2023 page 5 (1) Red shown. See Base Candela table. 180°1.2 0.8 0.6 0.4 0.2 0.2 0.4 0.6 0.8 1.2 170°160°150° 140° 130° 120° 100° 90° 80° 70° 60° 50° 40° 30° 20°10°0° Polar Candela Distribution 90° Horizontal Base Candela Green 46 Yellow 67 Red 20 Blue 21 Candela Viewing Angle Example – Red Angle Factor Base(1) Candela 120 (top view) 0.7 20 14 90 (side view) 1 20 20 60 (bottom view) 0.7 20 14 Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. Standard Models Audible Models 80.9 [3.18] Ø 92.8 [3.65] [4.67] 134.7 [5.3] 25.5 [1.01] 13.0 [0.51] M36 x 2.0 Interior M12 x 1.0 81.0 [3.19] Ø 92.8 [3.65] [4.67] 134.8 [5.31] 25.5 [1.01] 13.0 [0.51] M36 x 2.0 Interior M12 x 1.0 © Banner Engineering Corp.
May 26, 2023page 6 K100 Pro Daylight Visible Beacon – DC Datasheet Accessories Pro Editor Hardware MQDC-506-USB Pro Converter Cable 1.83 m (6 ft) length 5-pin M12 quick disconnect to Device and USB to PC Required for connection to Pro Editor CSB-M1251FM1251M 5-pin parallel Y splitter (Male-Male-Female) For full Pro Editor preview capability Requires external power supply, sold separately PSW-24-1
24 V DC, 1 A power supply
2 m (6.5 ft) PVC cable with M12 quick disconnect Provides external power with splitter cable, sold separately ACC-PRO-CABLE5 Mating accessory for cabled and terminal models 150 mm (6 inch) PVC cable with M12 quick disconnect Lever wire nuts included (qty 5) Required to connect cabled models and screw terminal models to Pro Converter Cable, sold separately Cordsets 5-Pin Threaded M12 Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.5 m (1.5 ft) Straight ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-503 0.9 m (2.9 ft) MQDC1-506 2 m (6.5 ft) MQDC1-515 5 m (16.4 ft) MQDC1-530 9 m (29.5 ft) MQDC1-560 18 m (59 ft) MQDC1-5100 31 m (101.7 ft) MQDC1-506RA 2 m (6.5 ft) Right-Angle ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 5 m (16.4 ft) MQDC1-530RA 9 m (29.5 ft) MQDC1-560RA 19 m (62.3 ft) © Banner Engineering Corp.
K100 Pro Daylight Visible Beacon – DC Datasheet May 26, 2023 page 7 Brackets LMB36RA Indicator light right-angle mounting 36 mm mounting hole Stainless steel 50.8 25.44 X Ø6.5 62.5 Ø36.5 Elevated Mount System Model Features Components Black Anodized Alu- minum ¾ in. NPT Black Anodized Aluminum ½ in. NPT Clear Anodized Alu- minum ½ in. NPT SOP-E34-150A 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long Elevated-use stand-off pipe Black anodized aluminum or clear an- odized aluminum surface Threaded at both ends Compatible with most industrial environ- ments SOP-E34-300A 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E34-600A 600 mm (24 in) long SOP-E12-600A 600 mm (24 in) long — SOP-E34-900A 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-M36E12 Adapter from M36 thread to 12-14 NPSM thread Streamlined black plastic mounting base adapter/cover Drilled hole SA-M36SOP M36 thread adapter with clearance for ¾ pipe mount Streamlined black plastic mounting base adapter/cover Drilled hole Pipe Mounting Flange Model Features Construction SA-F12 Elevated-use stand-off pipes (½ in, NPSM/ DN15) M5 mounting hardware and nitrile gasket included Die-cast zinc base with black paint ø28 ø70 4x ø5.5 Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of ship- ment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUD- ING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BAN- NER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or lia- bilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installa- tion of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the prod- © Banner Engineering Corp.
May 26, 2023page 8 K100 Pro Daylight Visible Beacon – DC Datasheet uct warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other lan- guage. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. © Banner Engineering Corp.