K100 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Programmable Multicolor Indicator with Optional Audible Alarm for Indoor or Outdoor Use

  • Industrial beacon providing bright, configurable indication for OEMs and users that need visible status information
  • Rugged construction provides years of uninterrupted operation Unique water-shed beacon design helps protect the indicator
  • Fourteen colors in one device
  • Programmable using Banner's Pro Editor software and Pro Converter Cable
  • 36 mm threaded polycarbonate base
  • Rugged IP66, UL Type 4X housing
  • PNP or NPN operation depending on wiring
  • Variety of connector options
  • Rugged UV-stabilized polycarbonate base and window
  • 12 V DC to 48 V DC operating voltage Pro Editor Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. Full Preview Connection (Required) The full preview connection must be used for the K100 Pro Indicator Beacon. A B C E D F A = Pro Converter Cable (MQDC-506-USB) B = Splitter (CSB-M1251FM1251M) C = PC running Pro Editor software D = Any Banner Pro Series-enabled device (K50 shown) E = Power Supply (PSW-24-1 or PSD-24-4) F = 8-Pin to 5-Pin Double-Ended Cordset (MQDC-801-5M-PRO), required for 8- Pin models Models Standard models shown. Contact factory for other options. Family K100 Blank = 2 m integral PVC cable Q = 5-pin integral M12 quick disconnect QP = 150 mm (6 in) PVC cable with 5-pin M12 quick disconnect Q Connector * P = Pro P Style Type L L = Indicator Colors RGB7 Audible A Blank = None A = Audible RGB7 = RGB Multicolor * Models with a quick disconnect require a mating cordset K100 Pro Indicator Beacon – DC Original Document 229901 Rev. C

29 September 2022

A 12–48 V DC NPN Input A 12–48 V DC Key 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray An "X" denotes an active input. For example: When the black wire and the white wire are both active, the indicator will be Magenta Steady. Table 1: Default Configuration Wiring Operating Mode/Function Black Brown White Gray Non-Audible Audible X Red Steady Red Steady X Green Steady Green Steady X Blue Steady Blue Steady X X Yellow Steady Yellow Steady X X Magenta Steady Magenta Steady X X Cyan Steady Cyan Steady X X X White Steady White Steady X Off Audible Steady, Frequency 2.5 KHz, Volume High X X Red Steady Red Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X Green Steady Green Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X Blue Steady Blue Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X X Yellow Steady Yellow Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X X Magenta Steady Magenta Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X X Cyan Steady Cyan Steady, Audible Steady, Frequency 2.5 KHz, Volume High X X X X White Steady White Steady, Audible Steady, Frequency 2.5 KHz, Volume High K100 Pro Indicator Beacon – DC 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 229901 Rev. C

Supply Voltage and Current

12 V DC to 48 V DC

Maximum current (mA): Voltage Light Only Light & Audible 12 395 535 18 265 350 24 200 260 30 160 210 36 140 180 42 125 160 48 110 145 Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Indicator Response Time On response: 325 ms (max) Off response: 20 ms (max) Connections Integral 5-pin M12 male quick-disconnect connector, 150 mm (6 in) PVC-jacketed cable with an M12 quick disconnect, or 2 m (6.5 ft) integral PVC-jacketed cable, depending on model Models with a quick disconnect require a mating cordset Mounting M36 by 2.0 threaded base, maximum torque 5.0 N·m (44 inch-lbf) Interior 3/4-14 NPT Thread Mounting nut included Adjacent Unit Mounting Separation Distance Minimum: 0 in (mounted with unit flanges touching) Audible Characteristics Sound Intensity at 2.5 KHz, at 1 m (typical): Low volume setting: 93 dB Medium volume setting: 96 dB High volume setting: 101 dB Construction Base, Dome, and Nut: Polycarbonate Operating Conditions 90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) Pro Editor Configuration Connection to Pro Editor software enables control of:

  • Animation: Steady, Flash, Two Color Flash, Intensity Sweep, Two Color Sweep, Wave, Double Wave
  • Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber, Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green
  • Intensity: Off, Low, Medium, High, Custom
  • Speed: Slow, Standard, Fast, Custom
  • Pattern: Normal, Strobe, 3-Pulse, SOS, Random
  • Direction: Clockwise (CW), Counter-Clockwise (CCW)
  • Audio Feedback: Off, On, Pattern, Advanced Audible
  • Audible Tones: Pulse, Wobble, Strobe, Whoop, Staccato, Siren, Continuous 1, Continuous 2, Jingle, Melody 1, Melody 2, Melody 3
  • Audible Intensity: Low, Medium, High
  • One pin configurable as either an input or an output Pro Converter Cable required to interface between PC and indicator, see accessories Indicator Characteristics Color Dominant Wavelength (nm) or Color Temperature (CCT) Color Coordinates 1 Lumen Output (Typical at 25 °C)x y Red 620 nm 0.6900 0.3081 36 Green 525 nm 0.1620 0.7112 73 Blue 468 nm 0.1400 0.0539 14 Yellow 575 nm 0.4780 0.4700 91 Magenta - 0.3877 0.1817 47 Cyan 492 nm 0.1666 0.3406 83 White 6000K 0.3379 0.3380 112 Amber 590 nm 0.5566 0.4098 63 Rose - 0.5234 0.2310 39 Lime Green 562 nm 0.3987 0.5306 99 Orange 600 nm 0.6135 0.3665 50 Sky Blue 485 nm 0.1483 0.2476 87 Violet - 0.2148 0.0938 28 Spring Green 507 nm 0.1780 0.5375 77 Internal temperature compensation circuitry: Reduces the Lumen Output to decrease the unit's internal operating temperature. The amount of reduction is dependent on the ambient operating temperature, supply voltage, color, and/or audible functions being utilized. Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) Impact: IK08 (IEC 60068-2-75) Environmental Rating IP66, UL Type 4X LED Lifetime Lumen maintenance L70 When operating within specifications, output decreases less than 30% after 42,000 hours Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Certifications Banner Engineering Europe Park Lane, Culliganlaan 2F bus 3, 1831 Diegem, BELGIUM Turck Banner LTD Blenheim House, Blenheim Court, Wickford, Essex SS11 8YT, Great Britain 1 Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. K100 Pro Indicator Beacon – DC P/N 229901 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 3

5-Pin Threaded M12 Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-506RA 2 m (6.5 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 5 m (16.4 ft) MQDC1-530RA 9 m (29.5 ft) MQDC1-560RA 19 m (62.3 ft) Brackets LMB36RA

  • Indicator light right-angle mounting 36 mm mounting hole
  • Stainless steel 50.8 25.44 X Ø6.5 62.5 Ø36.5 Elevated Mount System Model Features ComponentsBlack Anodized Aluminum ¾ in. NPT Black Anodized Aluminum ½ in. NPT Clear Anodized Aluminum ½ in. NPT SOP-E34-150A 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long
  • Elevated-use stand-off pipe
  • Black anodized aluminum or clear anodized aluminum surface Threaded at both ends
  • Compatible with most industrial environments SOP-E34-300A 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E34-600A 600 mm (24 in) long SOP-E12-600A 600 mm (24 in) long — SOP-E34-900A 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-M36E12
  • Adapter from M36 thread to 12-14 NPSM thread
  • Streamlined black plastic mounting base adapter/cover Drilled hole SA-M36SOP
  • M36 thread adapter with clearance for ¾ pipe mount
  • Streamlined black plastic mounting base adapter/cover Drilled hole Pipe Mounting Flange Model Features Construction SA-F12
  • Elevated-use stand-off pipes (½ in, NPSM/ DN15)
  • M5 mounting hardware and nitrile gasket included Die-cast zinc base with black paint ø28 ø70 1/2-14 NPSM 4x ø5.5 K100 Pro Indicator Beacon – DC P/N 229901 Rev. C www.bannerengineering.com - Tel: + 1 888 373 6767 5

Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. K100 Pro Indicator Beacon – DC © Banner Engineering Corp. All rights reserved