J26WD14A6NP02

J26WD14A6NP02 VITALCONN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

81.28 87.12±0.25 13.97 3.20±0.25 42.45±0.25 3.80±0.25 25.50±0.25 K L L 0.50 C LED2 A AB LED3 J1J8 B LED1 CEGI JK HI FG DE LED4 F D J H 5G 5G MECHANICAL DIMENSION P/N & DATE CODE 1.MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL94V-0 PANTONE BLACK CONTACT: PHOSPHOR BRONZE T=0.35MM FLAT PIN PLATING: 30u"GOLD PLATING OVER NICKEL SHIELD: 0.20mm THICKNESS COPPER ALLOY WITH NICKEL PLATED PCB RETENTION FRE-SOLDER: 1LB MIN. SIGNAL PINS:100U” TIN(SN)PLATING FINISH MIN OVER NICKEL. 2.MECHANICAL CHARACTERISTICS DURABILITY: 750(MODULAR JACK) INSERTION/PLUG DIMENSION CYCLES 3.ENVIRONMENTAL OPERATING TEMPERATURE: -40℃~+85℃ STORAGE TEMPERATURE: -40℃~+85℃ A ll data sheet.com

11.43 (10.89) 4.70 1.27 2.54 6-∅1.60 2-∅3.25 24-∅1.15 120-∅0.91 RECOMMENDED PCB LAYOUT AND LED: 25.78 28.70 2.42 3.69 7.75 9.02 9.65 12.19 13.97 69.85 16.39 30.36 44.33 58.30 72.27 81.28 86.87 SUGGESTED PCB BOARD LAYOUT VIEWED FROM COMPONENT SIDE 4.57 15.49 2.54 0.83 2.54 0.89 3.43 13.97 3.05 0.38 2.54 19.94 23.75 NO TRACE ZONE 24-∅1.02 LED ELECTRICAL / OPTICAL CHARACTERISTICS: LED2 GREEN YELLOW GREEN COLORλD DOMINANT WAVELENGTH 590nm 2.1 V 20mA 565nm 2.2 V VF(FORWARD VOLTAGE) 20mA IF LED1 YELLOW + GREEN + COLOR 16COLOR17 LED 2 POLARITY LED 1 POLARITY YELLOW GREEN YELLOW LED3 GREEN LED4 YELLOW GREEN YELLOW UPPER PORT LOWER PORT +YELLOW+GREEN LED 3 POLARITYLED 4 POLARITY

21 COLOR 20COLOR

+GREEN+YELLOW +YELLOW+GREEN PIN NUMBER ASSIGNMENT (COMPONENT SIDE VIEW) 2122 2 2 4 4 6 6 8 8 10 10 161718 UPPER PORT 15161718 1920 2122 2 2 4 4 6 6 8 8 10 10 1 15 LOWER PORT 12 12 11 11 A ll data sheet.com

26.20±0.15 IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL OPENING DIMENSIONS CHANGE ACCORDINGLY. THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRONT SURFACE OF PART IS ONLY A SUGGESTION. CONNECTOR ASSEMBLED PANEL AND PCB PCB NOTE: 88.52±0.15 0.38 RECOMMENDED PANEL CUT OUT METAL PANEL 2.16±0.15 A ll data sheet.com

SCHEMATIC: 1CT:1CT 0.1uF/100VDC SHIELD TD4- P7 TD4+ P8 TD3- P5 TD3+ P6 TD2- P3 TD2+ P4 VC2 P12 VC1 P11 GND P10 PCB SIDE TO PHY 0.1uF 100V 22nF 100V 22nF 100V 22nF 75ohm 2kV 1000pF 1CT:1CT 1CT:1CT 75ohm 75ohm PORTA TO PORT D (1G POE PLUS) TD1+ P2 1CT:1CT VCC P9 75ohm 22nF 100V TD1- P1 0.1uF CABLE SIDE J1 TX1+ J2 TX1- J3 TX2+ J6 TX2- J4 TX3+ J5 TX3- J7 TX4+ J8 TX4- ELECTRICAL CHARACTERISTICS @ 25°C TURN RATIO: PRIMARY INDUCTANCE: FOR CHANNEL 1 AND CHANNEL 2 350uH MIN. @100KHz,100mVRMS,11mA DC BIAS 120uH MIN. @100KHz,100mVRMS,19mA DC BIAS FOR CHANNEL 3 AND CHANNEL 4 350uH MIN. @100KHz,100mVRMS,8mA DC BIAS HI-POT TEST： PCB SIDE TO CABLE SIDE 2250VDC. Insertion Loss: 0.3MHz~1MHz -1.1dB MAX. 1MHz~65MHz -0.8dB MAX. 65MHz~100MHz -1.1dB MAX. 100MHz~125MHz -2.0dB MAX. Return Loss:(Load:100 ohms) 1MHz~40 MHz -16dB MIN 40MHz~100 MHz -16+20Log(F/80)dB MIN . Cross Talk: 1MHz~40MHz -30dB MIN. 40MHz~100 MHz -33+20log(F/50)dB MIN. CM to CM Rejection: 1MHz~100 MHz -30dB MIN. CM to DM Rejection: 1MHz~100 MHz -30dB MIN. BALANCED DC LINE CURRENT: 600 mA MAX. @ 57 VDC CONTINUOUS 1.2A MAX. @ 57 VDC FOR 200 MILLISECONDS A ll data sheet.com

PORT E TO PORT L (5G POE PLUS) SCHEMATIC: TD1+ P2 VCC P9 PCB SIDE TO PHY GND P10 VC1 P11 VC2 P12 TD1- P1 TD2+ P4 TD2- P3 TD3+ P6 TD3- P5 TD4+ P8 TD4- P7 75ohm 75ohm 75ohm 1000pF SHIELD 1CT:1CT 1CT:1CT 1CT:1CT 0.1uF/100VDC 22nF 100V 0.1uF 22nF 100V 22nF 100V 2kV 100V 22nF75ohm 1CT:1CT 0.1uF ELECTRICAL CHARACTERISTICS @ 25°C TURN RATIO: PRIMARY INDUCTANCE: FOR CHANNEL 1 AND CHANNEL 2 180uH MIN. @100KHz,100mVRMS,0mA DC BIAS 120uH MIN. @100KHz,100mVRMS,15mA DC BIAS FOR CHANNEL 3 AND CHANNEL 4 180uH MIN. @100KHz,100mVRMS,0mA DC BIAS HI-POT TEST： PCB SIDE TO CABLE SIDE 2250VDC. Insertion Loss: 1MHz~50MHz -0.5dB MAX. 50MHz~125MHz -1.1dB MAX. 125MHz~250MHz -1.5dB MAX. Return Loss:(Load:100 ohms) 1MHz~40 MHz -20dB MIN 40MHz~250 MHz -20+12.5Log(F/40)dB MIN . Cross Talk: 1MHz~150MHz -30dB MIN. 150MHz~250 MHz -20dB MIN. CM to CM Rejection: 30MHz~400 MHz -30dB MIN. CM to DM Rejection: 10MHz~250 MHz -45+f/35dB MIN. BALANCED DC LINE CURRENT: 600 mA MAX. @ 57 VDC CONTINUOUS 1.2A MAX. @ 57 VDC FOR 200 MILLISECONDS A ll data sheet.com

PACKING QUANTITY : 15 PCS FINISHED GOODS PER TRAY

10 TRAYS (150 PCS FINISHED GOODS) PER CARTON BOX

PACKAGE INFORMATION AND LABEL Tray Cover Tray Baser 34.5X27X36 A ll data sheet.com