J2178B IDEA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
- Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A 2 x 3 mm, Bi-level PCB Mount LED Indicator, J2178B Series The J2178B series is an assembly using two 2 x 3 mm LEDs in a right-angle mount. Designed to save panel space, the assembly mea- sures just over 4.3 mm(0.170") in width and can be CMOS driven to save components. Long arrays should be located on a pitch of 4.4 mm(0.173") to avoid crowding and tolerance build-up. This series can also be supplied with pinout reversed from that shown by adding “- RL ” to the order code of the part number. Specify part desired as follows: J2178B/Order Code LED1 + Order Code LED 2For example:“J2178B/G+Y” designates an assembly with a green LED on top and a yellow LED on the bottom.“J2178B/(G+Y)-RL ” designates the same assembly with leads reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Typical Characteristics Recom. Op. If (mA) Epoxy & Type Color Order Code Peak Vf (V) Iv (mcd) 2 Θ λ (nm) @If=20mA @If=2 mA (Deg) TInted Diffused Red I 639 1.8 4.0 50 2 - 10 Green G 575 1.7 2.5 60 2 - 10 Y ellow Y 591 1.85 4.0 45 2 - 10 (typ for bi-color) Green Anode Red or yellow Anode + – (Pinout for single color) 4.3 (0.17) 5.08 2.54 2.54 9.0(.355) 2.5±.5 2 typ 5.08 2.54 9.65 3.5 min