J174

J174_01 FAIRCHILD | Alldatasheet

Document overview

• PDF pages: 12

Technical content

G D S NOTE: Source & Drain are interchangeable J174 J175 J176 J177 MMBFJ175 MMBFJ176 MMBFJ177 P-Channel Switch This device is designed for low level analog switching sample and hold circuits and chopper stabilized amplifiers. Sourced from Process 88. SOT-23 Mark: 6W / 6X / 6Y S G D TO-92 Absolute Maximum Ratings* TA = 25°C unless otherwise noted *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES : 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics TA = 25°C unless otherwise noted Symbol Characteristic Max Units J174 -177 *MMBFJ175-177 PD Total Device Dissipation Derate above 25°C 350 2.8 225 1.8 mW mW/ °C R θJC Thermal Resistance, Junction to Case 125 °C/W R θJA Thermal Resistance, Junction to Ambient 357 556 °C/W Symbol Parameter Value Units VDG Drain-Gate Voltage - 30 V VGS Gate-Source Voltage 30 V IGF Forward Gate Current 50 mA TJ ,Tstg Operating and Storage Junction Temperature Range -55 to +150 °C *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."  1997 Fairchild Semiconductor Corporation J174 / J175 / J176 / J177 / MMBFJ175 / 176 / 177

J174 / J175 / J176 / J177 / MMBFJ175 / 176 / 177 P-Channel Switch (continued) Electrical Characteristics TA = 25°C unless otherwise noted OFF CHARACTERISTICS Symbol Parameter Test Conditions Min Max Units ON CHARACTERISTICS IDSS Zero-Gate Voltage Drain Current*VDS = - 15 V, IGS = 0 174 175 176 177 - 20 - 7.0 - 2.0 - 1.5 - 100 - 60 - 25 - 20 mA mA mA mA rDS(on) Drain-Source On Resistance VDS ≤ 0.1 V, VGS = 0 174 175 176 177 125 250 300 Ω Ω Ω Ω *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% B(BR)GSS Gate-Source Breakdown Voltage IG = 1.0 µA, VDS = 0 30 V IGSS Gate Reverse Current V GS = 20 V, VDS = 0 1.0 nA VGS(off) Gate-Source Cutoff Voltage VDS = - 15 V, ID = - 10 nA 174 175 176 177 5.0 3.0 1.0 0.8 6.0 4.0 2.5 V V V V Typical Characteristics Common Drain-Source -5-4-3-2-10 -20 -16 -12 V - DRAIN-SOURCE VOLTAGE (V) I - DRAIN CURRENT (mA) DS D 1.0 V 2.5 V 2.0 V 0.5 V 1.5 V V = 0 VGS T = 25°C TYP V = 4.5 VGS(off) A 3.0 V 3.5 V r - DRAIN "ON" RESISTANCE (Ω) Parameter Interactions 12 5 1 0 100 100 500 1,000 V - GATE CUTOFF VOLTAGE (V) g - TRANSCONDUCTANCE (mmhos) GS (OFF) fs I , g @ V = 15V, V = 0 PULSED r @ -100 mV, V = 0 V @ V = - 15V, I = - 1.0 µA GS(off) DSS r D IDSS DS DS GS DS DS GS fs DS DS g fs

Typical Characteristics (continued) Transfer Characteristics 01234 -32 -24 -16 V - GATE-SOURCE VOLTAGE (V) I - DRAIN CURRENT (mA) GS D V = - 4.5 VGS(off) 25°C V = - 15 VDS V = 2.5 VGS(off) 125°C - 55°C 25°C 125°C - 55°C Transfer Characteristics 01234 V - GATE-SOURCE VOLTAGE (V) I - DRAIN CURRENT (mA) GS D V = - 4.5 VGS(off) 25°C V = - 15 VDS V = 2.5 VGS(off) 125°C - 55°C 25°C - 55°C 125°C Output Conductance vs Drain Current 0.01 0.1 1 10 100 1000 I - DRAIN CURRENT (mA) g - OUTPUT CONDUCTANCE ( mhos)D os V = - 4.5VGS(off) f = 1.0 kHz µ V = - 2.5VGS(off) -20V -10V -10V -20V -5.0V-5.0V __ _ _ Transconductance vs Drain Current 0.1 1 10 100 0.1 0.5 I - DRAIN CURRENT (mA) g - TRANSCONDUCTANCE (mmhos) D fs V = 2.5VGS(off) V = -15V f = 1.0 kHz DG V = 6.0VGS(off) - 55°C 25°C 125°C 25°C __ __ Capacitance vs Voltage 048 1 2 1 6 2 0 100 V - GATE-SOURCE VOLTAGE (V) C (C ) - CAPACITANCE (pF)rs GS is C (V = -15V)is DS C (V = -15V)rs DS f = 0.1 - 1.0 MHz Normalized Drain Resistance vs Bias Voltage 0 0.2 0.4 0.6 0.8 1 100 V /V - NORMALIZED GATE-SOURCE VOLTAGE (V) r - NORMALIZED RESISTANCE GS DS r = DS V @ 5.0V, 10 µAGS(off) r DS V GS(off) V GS1 - GS(off) J174 / J175 / J176 / J177 / MMBFJ175 / 176 / 177 P-Channel Switch (continued)

J174 / J175 / J176 / J177 / MMBFJ175 / 176 / 177 P-Channel Switch (continued) Typical Characteristics (continued) Noise Voltage vs Frequency 0.01 0.1 1 10 100 100 f - FREQUENCY (kHz) e - NOISE VOLTAGE (nV / Hz)n V = - 15V BW = 6.0 Hz @ f = 10 Hz, 100 Hz = 0.2f @ f ≥ 1.0 kHz DG I = 5.0 mAD I = - 0.2 mAD Channel Resistance vs Temperature -50 0 50 100 150 100 500 1000 T - AMBIENT TEMPERATURE ( C) r - DRAIN "ON" RESISTANCEDS A o (Ω ) V = 2.5VGS(off) V = 4.5VGS(off) V = 8.0VGS(off) V = -100 mV V = 0 DS GS Power Dissipation vs Ambient Temperature 0 25 50 75 100 125 150 100 150 200 250 300 350 TEMPERATURE ( C) P - POWER DISSIPATION (mW) D o TO-92 SOT-23

March 2001, Rev. B1©2001 Fairchild Semiconductor Corporation TO-92 Packaging Configuration: Figure 1.0 AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options 2000 units per EO70 box for std option FSCINT Label 530mm x 130mm x 83mm Intermediate box 10,000 units maximum per intermediate box for std option FSCINT Label 114mm x 102mm x 51mm Immediate Box Anti-static Bubble Sheets (TO-92) BULK PACKING INFORMATION EOL CODE DESCRIPTION LEADCLIP DIMENSION QUANTITY J18Z TO-18 OPTION STD NO LEAD CLIP 2.0 K / BOX J05Z TO-5 OPTION STD NO LEAD CLIP 1.5 K / BOX NO EOL CODE TO-92 STANDARD STRAIGHT FOR: PKG 92, NO LEADCLIP 2.0 K / BOX BULK OPTION See Bulk Packing Information table 375mm x 267mm x 375mm Intermediate Box FSCINT Label Customized Label 333mm x 231mm x 183mm Intermediate Box FSCINT Label Customized Label TO-92 TNR/AMMO PACKING INFROMATION Packing Style Quantity EOL code Reel A 2,000 D26Z E2 , 0 0 0 D 2 7 Z Ammo M 2,000 D74Z P2 , 0 0 0 D 7 5 Z Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units F63TNR Label

5 Ammo boxes per

LOT: CBVK741B019 NSID: PN2222N D/C1: D9842 SPEC REV: B2 SPEC: QTY: 10000 QA REV: FAIRCHILD SEMICONDUCTOR CORPORATION HTB:B (FSCINT) F63TNR Label Customized Label

5 Reels per

See Fig 2.0 for various Reeling Styles LOT: CBVK741B019 FSID: PN222N D/C1: D9842 QTY1: SPEC REV: SPEC: QTY: 2000 D/C2: QTY2: CPN: N/F: F (F63TNR)3 F63TNR Label sample FSCINT Label sample C

5 EO70 boxes per

94 (NON PROELECTRON SERIES), 96 L34Z TO-92 STANDARD STRAIGHT FOR: PKG 94 NO LEADCLIP 2.0 K / BOX (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98

TO-92 Tape and Reel Data, continued September 1999, Rev. B TO-92 Reeling Style Configuration: Figure 2.0 Style “A”, D26Z, D70Z (s/h) Machine Option “A” (H) Style “E”, D27Z, D71Z (s/h) Machine Option “E” (J) FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM ORDER STYLE D75Z (P) FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP ORDER STYLE D74Z (M) TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP

Base of Package to Lead Bend Component Height Lead Clinch Height Component Base Height Component Alignment ( side/side ) Component Alignment ( front/back ) Component Pitch Feed Hole Pitch Hole Center to First Lead Hole Center to Component Center Lead Spread Lead Thickness Cut Lead Length Taped Lead Length Taped Lead Thickness Carrier Tape Thickness Carrier Tape Width Hold - down Tape Width Hold - down Tape position Feed Hole Position Sprocket Hole Diameter Lead Spring Out SYMBOL b Ha HO Pd Hd P PO F1/F2 d L t W WO DO S DIMENSION 0.098 (max) 0.928 (+/- 0.025) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max) 0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.247 (+/- 0.007) 0.104 (+/- 0 .010) 0.429 (max) 0.032 (+/- 0.006) 0.021 (+/- 0.006) 0.236 (+/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.004 (max) Note : All dimensions are in inches. ITEM DESCRIPTION SYSMBOL MINIMUM MAXIMUM Reel Diameter D1 13.975 14.025 Arbor Hole Diameter (Standard) D2 1.160 1.200 (Small Hole) D2 0.650 0.700 Core Diameter D3 3.100 3.300 Hub Recess Inner Diameter D4 2.700 3.100 Hub Recess Depth W1 0.370 0.570 Flange to Flange Inner Width W2 1.630 1.690 Hub to Hub Center Width W3 2.090 Note: All dimensions are inches TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0 Ha H1 HO PO P1 F1 DO P Pd b d L S WO W t Hd TO-92 Reel Configuration: Figure 5.0 User Direction of Feed SE NS IT I VE DE VI CES EL ECTROSTATIC Customized Label F63TNR Label TO-92 Tape and Reel Data, continued July 1999, Rev. A

TO-92 (FS PKG Code 92, 94, 96) January 2000, Rev. B 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.1977 ©2000 Fairchild Semiconductor International

Configuration: Figure 1. 0 Components Lead er Tape 500m m minimum or 125 empty poc kets Trailer Tape 300m m minimum or 75 empty pockets SOT-23 Tape Leader and Trailer Configuration: Figure 2. 0 Cover Tape Carrier Tape Note/Comment s Packaging Option SOT-23 Packaging Information Standard (no flow code )D87Z Packaging type Reel Size TNR 7" Dia TNR 13" Qty per Reel/Tub e/Bag 3,000 10,000 Box Dimension (mm) 187x107x183 343x343x64 Max qty per Box 24,000 30,000 Weig ht per un it (gm) 0.00 82 0.00 82 Weig ht per Reel (kg) 0.11 75 0.40 06 Human readable Label Human Readabl e Label Human Readabl e Label sample 34 3mm x 34 2mm x 64mm Intermed iate bo x for L87Z Option 18 7mm x 10 7mm x 183mm Intermed iate Box for Stand ard O ption SOT-23 Unit Orientation 3P 3P 3P 3P Human R eadable Label Cus tomized Label Embo ssed Carrier Tape Antis tatic Cove r Tape Packaging Description: SOT-23 made from a dissipative (carbon filled) polycarbonate re sin. The cove r tape is a m ultilayer film (He a t Activate d Adhe sive in na ture) prima rily compos ed of polyester film, a dhes ive la ye r, se alan t, a nd an ti-static s prayed agent. The se ree led pa rts in stan da rd option ar e shippe d with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color an d is made of po lystyre ne plas tic (anti- s tat ic coat ed ). Othe r option come s in 10 ,000 units per 13" or 330 cm diameter reel. This and s ome other options are des cribe d in the P a cka ging Information ta ble. The se full ree ls a re individua lly labele d an d p la ce d inside a standa rd intermediate made of recyclable corrugated brown paper with a Fairchil d logo printing. One pizza b ox contains eigh t re els ma ximum. And thes e inte rmed iate boxes are placed inside a labeled shipping box which comes in different sizes depending on the nu mber of pa rts shippe d. parts are shipped in tape. The carrier tape is SOT-23 Tape and Reel Data September 1999, Rev. C©2000 Fairchild Semiconductor International

Dimensions are in millimeter Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc SOT-23 (8mm) 3.15 +/-0.10 2.77 +/-0.10 8.0 +/-0.3 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 6.25 min 3.50 +/-0.05 4.0 +/-0.1 4.0 +/-0.1 1.30 +/-0.10 0.228 +/-0.013 5.2 +/-0.3 0.06 +/-0.02 Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) 8mm 7" Dia 7.00 177.8 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 2.165 8.4 +1.5/0 0.567 14.4 0.311 – 0.429 7.9 – 10.9 8mm 13" Dia 13.00 330 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 8.4 +1.5/0 0.567 14.4 0.311 – 0.429 7.9 – 10.9 See detail AA Dim A max 13" Diameter Option 7" Diameter Option Dim A Max See detail AA W2 max Measured at Hub W1 Measured at Hub Dim N Dim D min Dim C B Min DETAIL AA Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum component rotation 0.5mm maximum 0.5mm maximum Sketch C (Top View) Component lateral movement Typical component cavity center line 20 deg maximum Typical component center line Sketch B (Top View) Component Rotation Sketch A (Side or Front Sectional View) Component Rotation User Direction of Feed SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 SOT-23 Reel Configuration: Figure 4.0 P1 A0 F W Tc Wc T D0P0 P2 SOT-23 Tape and Reel Data, continued September 1999, Rev. C

SOT-23 (FS PKG Code 49) September 1998, Rev. A1 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0082 ©2000 Fairchild Semiconductor International

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Formative or In Design First Production Full Production Not In Production DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Rev. G ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E 2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST SyncFET™ TinyLogic™ UHC™ VCX™