DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Contact Arrangement 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT Contact Resistance < 30 milliohms initial Contact Material AgSnO
2 AgSnO2In2O3
Maximum Switching Power 9600VA, 1120 W Maximum Switching Voltage 277VAC, 110VDC Maximum Switching Current 40A TÜV Contact Rating N.O. 40A @ 240VAC; 14VDC 30A @ 277VAC N.C. 30A @ 240VAC; 14VDC 20A @ 277VAC R F F E197852
Specifi cations and availability subject to change without notice.Dimensions shown in mm. Dimensions are shown for reference purposes only. J115F1 page 2
Ordering Information
General Data* 1. Series J115F1 1C 12VDC S 6 .6 J115F1 2. Contact Arrangement 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT 3. Coil Voltage 5VDC 9VDC 12VDC 24VDC 48VDC 110VDC 12VAC 24VAC 110VAC 120VAC 220VAC 240VAC 277VAC 4. Sealing Options S = Sealed (standard) N = No cover 5. Option None = Pin 6 included not available with AC coils 6 = Pin 6 removed H = Pin 6 removed & high dielectric strength resistant not available with AC coils 6. Coil Power .9 = .9W .6 = .6W Blank = 2VA (AC Coil) 7. Contact Material Blank = AgSnO U = AgSnO2In2O3 Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 1000M Ω min. @ 500VDC initial Dielectric Strength Coil to Contact 4000V rms min. @ s ea level initial (H = high dielectric strength option) 2500V rms min. @ sea level initial (with Pin 6 removed) Contact to Contact 1500V rms m in. @ sea level initial Shock Resistance 200m/s 2 for 11 ms Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 10N Operating Temperature -55 oC to +125oC Storage Temperature -55 oC to +155oC Solderability 260 oC for 5 s Weight 30g, 27g (no cover) * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specifi c application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay.
Specifi cations and availability subject to change without notice.Dimensions shown in mm. Dimensions are shown for reference purposes only. J115F1 page 3 Dimensions Units = mm Bottom Views Schematics & PC Layouts S = Sealed N = No Cover 1A 1B 1C With Pin 6 Without Pin 6