J104

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

• Values can change due to the switching frequency, desired reli- ability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specifi c application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage VDC (max) 75% of rated voltage Release Voltage VDC (min) 10% of rated voltage Coil Power W Operate Time ms Release Time ms 3 3.9 60 45 25 23 17.6 16 2.25 .3 .15 .20 .36 .40 .51 .55 4.5 1.5 5 6.5 167 125 56 63 39.7 45 3.75 .5 9 11.7 540 405 100 203 70.6 140 6.75 .9 12 15.6 960 720 400 360 282 280 9.00 1.2 24 31.2 N/A 2880 1600 1440 1129 1070 18.00 2.4 48 62.4 N/A 11.5K N/A 5760 4518 3900 36.00 4.8

Specifi cations and availability subject to change without notice.Dimensions shown in mm. Dimensions are shown for reference purposes only. J104 Dimensions Units = mm 1. Series J104A 2C 12VDC .55 S J104A .40W, .55W coil power only J104B .15W, .20W coil power only J104C .20W, .36W, .51W coil power only (only available on 5, 12 & 24 VDC coil) 2. Contact Arrangement 2C = DPDT 3. Coil Voltage 3VDC 5VDC 9VDC 12VDC 24VDC not available with .15W coil power 48VDC **not available with .15W or .36W coil power 4. Coil Power J104A J104B J104C .51 = .51W 5. Sealed S = Sealed (standard)

Ordering Information

20.18 [.79] 9.95 [.39] 10.95 [.43] 10.60 [.42]

3.55 TYP

[.14] 7.62 [.30] 5.08 [.20] 7.62 [.30] 1.20 [.05] 1.17 [.05] 5.08 [.20]

0.30 TYP

[.01]

0.50 TYP

[.02] 20.30 [.80] 11.20 [.44] 11.45 [.45] 10.00 [.39] 7.62 [.30] 5.08 [.20] 7.62 [.30]

3.45 TYP

[.14] 1.26 [.05] 1.19 [.05] 5.08 [.20] [.02] 0.50 TYP [.02] [.01] (2X) 0.40 J104A & J104B J104C

Specifi cations and availability subject to change without notice.Dimensions shown in mm. Dimensions are shown for reference purposes only. Bottom Views Schematics & PC Layouts 7.62 [.30] 5.08 [.20] 5.08 [.20] 7.62 [.30] Ø1.00 TYP [.04] J104