IS-1009RH RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • Electrically screened to SMD # 5962-00523
  • QML qualified per MIL-PRF-38535 requirements
  • EH version acceptance tested to 50krad(Si) (LDR)
  • Radiation environment - IS-1009EH
  • Radiation environment - IS-1009RH
  • Reverse breakdown voltage (V
  • Device is tested with 10µF shunt capacitance connected from V+ to V-, which provides optimum stability
  • Interchangeable with 1009 and 136 industry types

Applications

  • P o w e r s u p p l y m o n i t o r i n g
  • Reference for 5V systems
  • A/D and D/A reference Pin Configurations IS2-1009RH, IS2-1009EH (TO-206AB CAN) BOTTOM VIEW ISYE-1009RH, ISYE-1009EH (SMD.5) BOTTOM VIEW 1 3 V- ADJ ADJ

IS-1009RH, IS-1009EH FN4780 Rev 8.0 Page 2 of 4 May 18, 2021

Ordering Information

NUMBER (Note 2) INTERNAL MKT. NUMBER (Note 1) RADIATION HARDNESS (Total Ionizing Dose) PACKAGE DESCRIPTION (RoHS Compliant) PKG. DWG.# CARRIER TYPE TEMP. RANGE 5962F0052302VXC IS2-1009EH-Q HDR to 300krad(Si), LDR to 50krad(Si)

3 Lead Metal Can package

TO-206AB (T0-46) T3.B Tray -55 to +125°C 5962F0052302VYC ISYE-1009EH-Q 3 Pad Hermetic CLCC J3.A Tube 5962F0052302V9A IS0-1009EH-Q ( Note 3)D i e - - N/A IS2-1009EH/PROTO ( Note 4) N/A 3 Lead Metal Can package TO-206AB (T0-46) T3.B Tray ISYE-1009EH/PROTO (Note 4)3 P a d H e r m e t i c C L C C J3.A Tube IS0-1009EH/SAMPLE (Notes 3, 4)D i e - - 5962F0052301VXC IS2-1009RH-Q No longer available or supported HDR to 300krad(Si) 3 Lead Metal Can package TO-206AB (T0-46) T3.B Tray 5962F0052301QXC IS2-1009RH-8 No longer available or supported 5962F0052301VYC ISYE-1009RH-Q No longer available or supported 3 Pad Hermetic CLCC J3.A Tube 5962F0052301QYC ISYE-1009RH-8 No longer available or supported 5962F0052301V9A IS0-1009RH-Q ( Note 3) No longer available or supported Die - - N/A IS2-1009RH/PROTO ( Note 4) No longer available or supported N/A 3 Lead Metal Can package TO-206AB (T0-46) T3.B Tray ISYE-1009RH/PROTO (Note 4) No longer available or supported 3 Pad Hermetic CLCC J3.A Tube IS0-1009RH/SAMPLE IS0-1009RH/SAMPLE ( Notes 3, 4) No longer available or supported Die - - NOTES: 1. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. 2. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed must be used when ordering. 3. Die product tested at T A = + 25°C. The wafer probe test includes functional and parametric testing sufficient to make the die capable of meeting the electrical performance outlined in the SMD. 4. The /PROTO and /SAMPLE are not rated or certified for Total Ioni zing Dose (TID) or Single Event Effect (SEE) immunity. These parts are intended for engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across temperature specified in the DLA SMD and are in the same form and fit as the qualified device. The /SAMPLE parts are capable of meeting the electrical limits and conditions specified in the DLA SMD. The /SAMPLE parts do not receive 100% screening across temperature to the DLA SMD electrical limits. These part types do not come with a Certificate of Conformance because they are not DLA qualified devices.

IS-1009RH, IS-1009EH FN4780 Rev 8.0 Page 3 of 4 May 18, 2021 Die Characteristics DIE DIMENSIONS 1270µm x 1778µm (50 mils x 70 mils) Thickness: 356µm ±25.4µm (14 mils ±1 mil) INTERFACE MATERIALS Glassivation Type: Silox (SiO2) 1:6:1 Thickness: 8kÅ ±0.8kÅ (1kÅ undopped, 6kÅ dopped, cap 1kÅ undopped) Top Metallization Type: Al Si Cu Thickness: 16.0k Å±2kÅ Substrate EFSTDB: Single-poly dielectrically isolated complementary bipolar Backside Finish Silicon ASSEMBLY RELATED INFORMATION Substrate Potential Unbiased (DI) ADDITIONAL INFORMATION Worst Case Current Density <1.0 x 105 A/cm2 Transistor Count Metallization Mask Layout IS-1009RH, IS-1009EH ADJ

IS-1009RH, IS-1009EH FN4780 Rev 8.0 Page 4 of 4 May 18, 2021

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that you have the latest revision. DATE REVISION CHANGE May 18, 2021 8.0 Updated Radiation Acce ptance testing features bullets. Updated the Ordering Information table. Updated Die Characteristics for Glassivation and Substrate to match information in the SMD. Removed About Intersil section. Nov 19, 2015 7.0 Added Rev History and About Intersil verbiage. Added to page 1 introduction “The IS-1009EH replaces the obsoleted IS-1009RH.” Updated Ordering Information on page 2 as follows: Marked RH obsolete parts “No longer available or supported” Added EH Proto and Sample parts.

TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan www.renesas.com Contact Information For further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. (Rev.1.0 Mar 2020)