IPX182 ETC1 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Smart Pressure Transmitter for Standard Thread Mounting Features Benefits

  • Accuracy of better than ±0.15% of range • Improves process optimization and removes independent of process temperature temperature effects
  • 4 to 20 mA, 2 - wire output • Industry standard
  • HART digital communication • Process industry standard
  • 5 : 1 span turn - down capability • Allows use in multiple ranges
  • Ambient and process temperature compensation • Improved accuracy
  • Optional 100 Ohm platinum RTD output • Process temperature measurement without a second intrusion into the process Temperature Characteristics Operating temperature ranges (compensated): Temperature effects: Process: 77˚F to 575˚F (25˚C to 300˚C) option to 660˚F (350˚C) Electronics: ±0.15% of range/100˚F (±0.027% of range/10˚C) Electronics: 77˚F to 140˚F (25˚C to 60˚C) Humidity limits: 0% - 90% relative humidity non - condensing 400 250 800 1200 Power Supply (volts) Load (Ohms) 12 18 24 30 36 4-20 mA and digital communication 4-20 mA only

Electrical Characteristics

Output: 2 - wire, 4 to 20 mA. Hart digital communication superimposed Load limitation: Maximum loop resistance is determined by the on the 4 to 20 mA signal is available for remote configurations voltage of the external power supply. Digital communication Damping: Adjustable through HART communicator requires a minimum loop resistance of 250 Ohms. (See below) Power supply: 12 to 36 Vdc Electronics housing: IP 55, NEMA 3 Approvals (optional) FM approved, Class I, Division II, Groups A, B, C and D

Description

Dynisco's IPX182 is a smart pressure transmitter with ambient and process temperature compensation, featuring a thin film senso r and proprietary fabrication techniques. The IPX182 provides the most accurate pressure measurement available in a 1/2 - 20 UNF mounting. HART ® digital communication utilizing a HART compatible hand - held communicator enables re - ranging of the transmitter for maximum control of your process. Performance Characteristics Ranges: Resolution: 0.035% or better psi: 0 - 1,500, 0 - 3,000, 0 - 5,000, 0 - 7,500, 0 - 10,000 Zero span and adjustment: bar: 0 - 100, 0 - 200, 0 - 350, 0 - 500, 0 -680 Zero: +80% of range Accuracy: Span: 20% to 100% of range ±0.15% of range: Within pressures of 20% to 100% of range and process Turn-down: 5 : 1 maximum temperatures of 77˚F to 575˚F (25˚C to 300˚C) (±0.25% for 1500 psi range) Overpressure limit: 1.5 x range ±0.25% of range: Within pressures of 0 psig to 20% of range Sample rate: ²50 msec and above process temperatures (±0.50% for 1500 psi range) Long term stability: <0.09% of span per year Hastelloy: ±0.30% of range: Within pressures of 20% to 80% of range and process temperatures of 77˚F to 575˚F (25˚C to 300˚C) (±0.50% for 1500 psi range) ±0.50% of range: Within pressures of 0 psig to 20% of range (±1.00% for 1500 psi range) Specifications New Extended Life Coating

Accuracy is based upon a maximum total length of process connection and flexible capillary of 36" (914). For each 6" (152) of length added accuracy is reduced by 0.10% to maximum length of 48" (1219) total. For total unit lengths over 48" (1219), the error correction software performance is reduced. Consult factory for specific requirements. Notes: • FM approved units include end cap with conduit connector and 20 ft. (6 meter) leads.

  • Standard unit includes a 6 pin Bendix connector and requires optional cable 929008 - 10 ft. (3 meter).
  • Standard unit with M315 option includes an 8 pin Bendix connector and requires optional cable 801726.
  • Mounting bracket P/N195901 recommended.
  • 10M units are compensated to at least 7.5M and extrapolated to 10M. A 7.25 (184) 3.00 (76.2) .414 .412 10.52 10.46 DIM ‘A’ ±.12 (FLEX LENGTH) CASE GROUND SCREW 1/2-14 NPT

1.12 WRENCH

1.40 (35.6) Ø FM APPROVED LABEL DYNISCO LABEL 3.88 (98.5) 2.25 (57.2) 2.375 (60.33)Ø OPTIONAL MTG BKT KIT P/N 195901 .625 (15.9) HEX .50 (12.7)Ø Ø 45˚30’ 44˚30’ 1/2-20 UNF-2A .42 (10.7) .62 (15.8) DIM ‘B’ (SNOUT LENGTH) Ø ( ) .44 (11.2) PT242 CONFIGURATION 1.25 (31.6) BRAIDED FLEX HOSE .45 NOM O.D. (11.4)(4) BRACKET MTG SCREWS NO. 8-32 SHCS EQ SP ON Ø 1.65 B.C. 10.38 + DIM ‘A’ + DIM ‘B’ ±.38 (263.6 + DIM ‘A’ + DIM ‘B’ ±9.7) .65 (16.5) .214 (5.44) Ø .307 .305 7.80 7.75( ) .515 (13.1)Ø MIN [SNOUT LENGTH - .200] MAX (5.08) .225 (5.72)45˚ .314 .312 7.98 7.92 Ø ( ) .458 .452 11.65 11.47 Ø ( ) .75 (19) .17 (4.3) MIN FULL THREAD Ø .004 S A 1/2-20 UNF-2B MAX All dimensions are in inches (millimeters) unless otherwise specified Ordering Guide 182002 - A Model Approvals Diaphragm Material/Coating Pressure Range Rigid Stem Flexible Stem Options Code Description Code Material/Coating Code psi Code bar Code Length Code Length Code Description (Blank) Standard (Blank) 15 - 5 PH SST 1.5M 0 - 1,500 1CB (0 - 100) 6 6 (152) 30 30 (762) M315 3 - wire w/ with DyMax™ 3M 0 - 3,000 2CB (0 - 200) 12 12 (304) RTD output FM Factory Coating 5M 0 - 5,000 3.5CB (0 - 350) (snout temp.) IPX182 Mutual H Hastelloy 7.5M 0 - 7,500 5CB (0 - 500) M625 Temperature Approved 10M 0 - 10,000 6.8CB (0 - 680) compensated Class I , to 350˚C Division II, M626 Accuracy to Groups 0.15% (1.5M) A, B, C & D DYNISCO MODEL IPX182 Smart Pressure Transmitter for Standard Thread Mounting