IPM-C112 JDSU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Key Features • High reliability Compact footprint with ultra-wide bandwidth Extremely low wavelength dependent loss (WDL) and PDL Up to 10-channel arrays JDSU miniature integrated power monitors are designed for channel monitoring in dense wavelength division multiplexing (DWDM) systems and Add/Drop modules. They can also be used for signal/pump power monitoring in erbium doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions tend to replace traditional fused fiber tap + photodiodes. The miniaturized version is a high performance active hybrid device that incorporates a micro-optic tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It offers high reliability, compact footprint with ultra-wide bandwidth, and very low polarization dependent loss (PDL).
Applications
- EDFA Raman amplifiers Add/Drop monitoring DWDM systems Miniature Integrated Power Monitor NORTH AMERICA : 800 498-JDSU (5378) WEBSITE : www.jdsu.comWORLDWIDE : +800 5378-JDSU
(Specifications in mm unless otherwise noted.)IPM Single Unit Diagram MINIATURE INTEGRATED POWER MONITOR (Specifications in mm unless otherwise noted.)IPM Array (6 to 8 channels) Diagram
20.1 MAX
18.35 0.50 X 0.50 Ø 0.50 PITCH 2.54
7.0 MAX
Ø 3.20 32.00 PITCH 2.54 X 11 =27.94 32.50 3.0 27.94 Ø 1.14 Ø 0.51 3.20 6.00 PIN 1 22.86 BOTTOM VIEW IPM Array Pinout Pin Description
1 Anode (Common)
2 Cathode 1
3 Cathode 2
4 Anode (Common)
5 Cathode 3
6 Cathode 4
7 Cathode 5
8 Anode (Common)
9 Cathode 6
10 Cathode 7
11 Anode (Common)
12 Cathode 8
(8 channel only)
Insertion loss (input to output) Maximum See table below Wavelength flatness (input to output) Maximum 0.002 dB/nm Polarization dependent loss (input to output) Maximum 0.03 dB PMD (input to output) Maximum 0.1 ps Optical return loss Minimum 45 dB PD operating bias voltage, VR -5 V (typical) PD responsivity Minimum 0.8 A/W (for net responsivity, see table below) PD linearity ±10% PD dark current Maximum 1 nA @ V R = -5 V and 23 °C PD cut-off frequency 600 MHz @ V R = -5 V and RL = 50 W Input optical power Maximum See table below Operating temperature -20 to 75 °C Storage temperature -40 to 85 °C T ensile load Maximum 5 N Package dimensions Single unit 3.2 mm x 18.5 mm 6 to 8 channels array 32 mm x 32.5 mm x 6 mm 10 channels array 38.8 mm x 32.5 mm x 6 mm Fiber type SMF-28, 250 µm primary coating Pigtail color code Black (input port); Clear (output port) Note: Parameters are specified for the signal wavelength range, al l polarization states, and operating temperature range without c onnector unless otherwise stated. MINIATURE INTEGRATED POWER MONITOR Tap Ratio and Insertion Loss Table Code Tap Ratio Maximum Insertion Loss Minimum Net Responsivity 1 Maximum Optical Power2 (Input to Output) 1 1% 0.5 dB 0.008 A/W 500 mW 2 2% 0.5 dB 0.016 A/W 250 mW 3 3% 0.5 dB 0.024 A/W 150 mW 4 4% 0.5 dB 0.032 A/W 125 mW 5 5% 0.6 dB 0.040 A/W 100 mW T 10% 0.8 dB 0.080 A/W 50 mW 1. The net responsivity is defined as the ratio of the PD cur rent output and optical power measured at output fiber. 2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
NORTH AMERICA : 800 498-JDSU (5378) WEBSITE : www.jdsu.comWORLDWIDE : +800 5378-JDSU SMF-28 is a registered trademark of Corning Incorporated. ST is a registered trademark of Lucent T echnologies. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specificat ions, function, fit or form of its products described herein, i nclud- ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks ar e the property of their respective holders. ©2007 JDS Uniphase
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: IPM-C82310010 MINIATURE INTEGRATED POWER MONITOR Code Tap Ratio 11 % 22 % 33 % 44 % 55 % T 10% Code Wavelength CC - b a nd LL - b a nd
1 C + L ba nds
1 Single device
2 Single unit
40 . 5 m 51 . 5 m Code Connector Type 0N o connector 1F C / P C 2F C / SPC