IPC1FAD2

IPR1SAD6 ETC2 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

A PEM w w w.apem .com B1- 15 IP series Pushbutton sw itches for harsh environm ents - bushing Ø 12 m m - m om entary D istinctive features and specifications K Illum inated or non-illum inated K Tactile feedback K W ide variety of configurations K Flat round actuator for optional m arking K Sealed to IP6 7 EN VIRO N M EN TAL SPECIFICATIO N S

• Front panel sealing : IP6 7 according to IEC 6 05 29 IP6 9K according to D IN 4 005 0-9 (non-illum inated) w ith cap U 5 125
• Shock resistance : 100 g according to IEC 5 12-4 , test 6 c
• Vibration resistance : 10-5 00H z - 10 g according to IEC 5 12-4 , test 6 d
• Salt spray : IEC 5 12-6 , test 11f
• Robustness (non-illum inated) : IK06 according to EN 5 0102 (1 joule)
• O perating tem perature : -4 0°C to + 85 °C ELECTRICAL SPECIFICATIO N S
• M ax. current/voltage rating w ith resistive load (gold plated silver contacts): 5 A 28VD C , 70.000 cycles 0,2A 4 8VD C , 5 00.000 cycles 0,5 A 4 8VAC , 5 00.000 cycles
• Initial contact resistance : 100 m Ω m ax.
• Insulation resistance : 1 G Ω m in. at 5 00VD C
• D ielectric strength : 1.5 00 Vrm s
• C ontact bounce : 10 m s M ATERIALS
• C ase : therm oplastic U L94 -V0
• Actuator : polyam ide 6 /6
• Bushing/bezel : zinc die-cast (zam ac), black painted
• C ontacts : silver, gold plated (std) brass, gold plated (for option 104 )
• O utput w ires (flying lead term inals) : F version : AW G 20, section 0,6 m m 2 W version : A W G 24 , section 0,23 m m 2
• LED w ires : F version : AW G 26 , section 0,12 m m 2 W version : A W G 24 , section 0,23 m m 2
• Lens : polycarbonate
• Term inal seal : epoxy G EN ERAL SPECIFICATIO N S
• Panel thickness : 1,5 m m (.05 9) m in. 4 m m (.15 7 m ax.)
• Total travel :
• Typical operating force : 6 N + /- 2N
• Low level/m ech. life : 1.000.000 cycles
• Torque : 1,5 N m m ax. applied to nut
• Soldering : 320°C m ax. for 3 sec. A resistor m ust be series-connected by the user. Resistor value = supply voltage - LED forw ard voltage LED forw ard current LED C O M PO N EN T SPEC IFIC ATIO N S LED colour Forw ard current Super red (L0S) 20m A 20m A 20m A 20m A Typ. forw ard voltage M ax. forw ard voltage 2,1V 2,1V 2,1V 3,2V Yellow (L0Y) G reen (L0G ) Blue (L0B) 20m A 3,35 V 2,3V 2,3V 2,3V 3,8V 4 ,25 V W hite (L0W ) AG EN CY APPRO VAL 2A 125 VAC /25 0VAC File E834 38 Se e follow ing pages. M O UN TIN G Panel cut-out M atrix m ounting Back of panel space requirem ent Ø13.60 (.535DIA) (.531DIA) Ø13.50 12.90 (.507) 1.50min-4Max (.059 min-.157max) 20.00 (.787) 20.00 (.787)(.787) 20.00 (.688) 17.50 CIPCE1 Œ O -ring For W term inals, current has to be lim ited to 4 00m A. UG 1 21 2-A-R1

B1- 16 A PEM w w w.apem .com IP series Pushbutton sw itches for harsh environm ents - bushing Ø 12 m m - m om entary O verview IP SERIES Actuator shapes C Square R Round, curved P Round, flat Term inals S Solder lugs F Flying leads, standard W Flying leads, thin N EW ! P Straight PC Z1 Q uick-connect (non-ill., N O only ) Electrical functions

3 N orm ally open

(N O )

5 N C /N O com bined

(non-illum inated) Actuator colours

1 Blue

2 Black

3 G reen

4 G rey

5 Yellow

6 Red

8 Bright chrom e

9 O range

AD Silver, gold plated (standard) CD Brass, gold plated (option 104 ) LED colours Blank N on-illum . L0 S Super red L0 Y Yellow L0 G G reen L0 B Blue L0 W W hite ABO UT THIS SERIES O n the follow ing pages, you w ill find successively : m odel structure of sw itches and options in the sam e order as in above chart Dim ensions : first dim ensions are in m m w hile inches are show n as bracketed num bers. A sealing boot is available to protect the sw itches against frost and sand. It is presented after the IA series and in section H . M ounting accessories : Standard hardw are supplied : 1 hex nut 14 m m (.5 5 1) across flats and 1 O -ring. H ex nut part num ber U 16 6 . Packaging unit : 25 pieces N O TICE : please note that not all com binations of above num bers are available. Refer to the follow ing pages for further inform ation. O ptions 1 0 0 Satin chrom e bezel 1 0 1 Bright chrom e bezel 1 0 4 H igh actuator (non-illum . round m odels only) O ption 1 0 4 If com bined w ith electrical function 5 (N C /N O ), this option should be ordered w ith CD contacts (brass, gold plated). C urrent/voltage rating : 100m A 30VD C Approval UL C onsult factory for detail of approved m odels.

A PEM w w w.apem .com B1- 17 IP series Pushbutton sw itches for harsh environm ents - bushing Ø 12 m m - m om entary S quare - illum inated M O DEL STRUCTURE

• H igh brightness illum ination
• Five LED colours
• Tin plated LED term inals Solder lug term inals Ø12.00x0.75SI (.047) 1.50 5.20(.015) (.204) (.059) 2.00 (.078) 5.08 (.200) (.267) 1.20 (.251) 6.40 6.80 0.40 EPOXY (.472DIAx0.75IS) 5.00 (.196)

1.50 Min

(.059 Min) 12.00 (.472SQ) 17.50 (.688SQ) 2.00 (.078) 6.10 (.240) © Flat IPC3SAD N orm ally O pen Sealed flying lead term inals Ø12.00x0.75SI 500± 10 (19.68± .393) (.688SQ) (.059 Min)

16.00 Max

(.629 Max) 6.80 (.267) (.472DIAx0.75IS) 5.00 (.196) 12.00 (.472SQ) (.078) 2.00 17.50 © Flat IPC3FAD N orm ally O pen W ire colours : black : N O contact, red : LED anode(+ ), blue : LED cathode(-) Cathode (-) LED ACTUATO R CO LO URS 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey 5 : yellow - 6 : red - 7/1 : w hite - 8 : bright chrom e 9 : orange - A : satin chrom e LED CO LO URS O PTIO N S L0 S : super red - L0 Y : yellow - L0 G : green - L0 B : blue L0 W : w hite 1 0 0 : Satin chrom e bezel 1 0 1 : Bright chrom e bezel APPRO VAL UL C onsult factory for details of approved m odels. To order sw itches m arked U L, com plete above box w ith ”U L”. Also available w ith straight PC term inals : IPC3PAD LED colour is indicated by the bottom of the sw itch. Show n w ith standard flying lead term inals. For TH IN flying leads, replace F w ith W .

B1- 18 A PEM w w w.apem .com IP series Pushbutton sw itches for harsh environm ents - bushing Ø 12 m m - m om entary S quare - non-illum inated M O DEL STRUCTURE

• D ouble function (N C /N O com bined) w ith a short behind-panel depth Solder lug term inals Ø12.00x0.75SI (.047) 1.50 5.20 (.204) (.059) 2.00 (.078) 5.08 (.200) (.015) (.472DIAx0.75IS) 6.40 (.251) 1.20 6.80 (.267) 0.40 EPOXY 5.00

(.196) 12.00 (.472SQ) (.059 Min) (.078) 17.50 (.688SQ) 2.00 NO NO NC NC/NONO © Flat IPC3SAD N orm ally O pen IPC5 SAD N C /N O com bined Sealed flying lead term inals Ø12.00x0.75SI 500± 10 (19.68± .393) (.059 Min) (.472DIAx0.75IS) (.267) (.629 Max) 6.80 5.00 (.196) 12.00 (.472SQ) (.078) 2.00 17.50 (.688SQ) NO NC/NO © Flat IPC3FAD N orm ally O pen IPC5 FAD N C /N O com bined ACTUATO R CO LO URS 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7/1 : w hite - 8 : bright chrom e 9 : orange - A : satin chrom e O PTIO N S 1 0 0 : Satin chrom e bezel 1 0 1 : Bright chrom e bezel W ire colours (N C /N O ) : black : N O , blue : N C Function 3 (N 0) Function 5 (N C /N O ) 5.20 (.204) 1.00 (.039) 4.55 (.179) CIPCOSP CIPCOSZ1 1.20 2.80 (.047) (.110) 8.70 2.40 (.342) (.094) 5.20 (.204) 1.00 (.039) 4.55 (.179) CIPCOSP CIPCOSZ1 1.20 2.80 (.047) (.110) 8.70 2.40 (.342) (.094) Straight P Q uick-connect Z1 Also available w ith straight PC term inals : IPC3PAD (N O ) or IPC5 PAD (N C /N O ) and quick-connect term inals : IPC3Z1 AD (N O only) APPRO VAL UL C onsult factory for details of approved m odels. To order sw itches m arked U L, com plete above box w ith ”U L”. Show n w ith standard flying lead term inals. For TH IN flying leads, replace F w ith W .

A PEM w w w.apem .com B1- 19 IP series Pushbutton sw itches for harsh environm ents - bushing Ø 12 m m - m om entary R ound - illum inated M O DEL STRUCTURE

• H igh brightness illum ination
• Five LED colours
• Tin plated LED term inals Solder lug term inals Ø12.00x0.75SI Ø17.50 (.688DIA) Ø 12.00 (.472DIA) (.047) 1.50 (.059) (.204)(.015) 5.20 (.200)(.078) 2.00 5.08 EPOXY 0.40 (.472DIAx0.75IS) (.267)(.251) 1.20 6.806.40

5.00 (.059 Min) (.196) (.078) 2.00 6.10 (.240) © Flat IPR3SAD N orm ally O pen Sealed flying lead term inals Ø12.00x0.75SI (19.68± .393) 500± 10 Ø 12.00 (.472DIA) (.688DIA) Ø17.50 (.196) 5.00 (.059 Min) 2.00 (.078) (.472DIAx0.75IS) (.629 Max) (.267) 6.80 © Flat IPR3FAD N orm ally O pen W ire colours : black : N O contact, red : LED anode(+ ), blue : LED cathode(-) Cathode (-) LED ACTUATO R CO LO URS LED CO LO URS L0 S : super red - L0 Y : yellow - L0 G : green - L0 B : blue L0 W : w hite APPRO VAL UL C onsult factory for details of approved m odels. To order sw itches m arked U L, com plete above box w ith ”U L”. Also available w ith straight PC term inals : IPR3PAD LED colour is indicated by the bottom of the sw itch. Cathode (-) LED Show n w ith standard flying lead term inals. 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey 5 : yellow - 6 : red - 7/1 : w hite - 8 : bright chrom e 9 : orange - A : satin chrom e O PTIO N S 1 0 0 : Satin chrom e bezel 1 0 1 : Bright chrom e bezel For TH IN flying leads, replace F w ith W .

B1- 20 A PEM w w w.apem .com IP series Pushbutton sw itches for harsh environm ents - bushing Ø 12 m m - m om entary R ound - non-illum inated Function 3 (N O ) Function 5 (N C /N O ) M O DEL STRUCTURE

• D ouble function (N C /N O com bined) w ith a short behind-panel depth Solder lug term inals NO NO NC NC/NONO 2.00 (.078) (.059 Min)

(.196) 5.00 (.472DIAx0.75IS) 0.40 EPOXY (.267) 6.80 1.20 6.40 (.251) 5.08 (.200) 2.00 (.078) 5.20(.015) (.204) (.059) 1.50 (.047) (.472DIA) Ø 12.00 (.688DIA) Ø1 7.50 Ø12.00x 0.75SI © Flat C urved actuator, N O IPR3SAD C urved actuator, N C /N O IPR5 SAD Flat actuator, N O IPP3SAD Flat actuator, N C /N O IPP5 SAD Sealed flying lead term inals NC/NONO (.472DIAx0.75IS) 6.80 (.267)(.519) 13.20 (.078) 2.00 (.059 Min) 5.00 (.196) Ø1 7.50 (.688DIA)(.472DIA) Ø12.00 500± 10 (19.68± .393) Ø1 2.00x0.75SI © Flat C urved actuator, N O IPR3FAD C urved actuator, N C /N O IPR5 FAD Flat actuator, N O IPP3FAD Flat actuator, N C /N O IPP5 FAD ACTUATO R CO LO URS W ire colours (N C /N O ) : black : N O , blue : N C 1 0 0 : Satin chrom e bezel 1 0 1 : Bright chrom e bezel 1 0 4 : H igh actuator - If com bined w ith function 5 (N C /N O ), order w ith C D contacts (instead of AD contacts). O PTIO N S 5.20 (.204) 1.00 (.039) 4.55 (.179) CIPCOSP CIPCOSZ1 1.20 2.80 (.047) (.110) 8.70 2.40 (.342) (.094) 5.20 (.204) 1.00 (.039) 4.55 (.179) CIPCOSP CIPCOSZ1 1.20 2.80 (.047) (.110) 8.70 2.40 (.342) (.094) Straight P Q uick-connect Z1 Also available w ith straight PC term inals : IP•3PAD (N O ) or IP•5 PAD (N C /N O ) and quick-connect term inals : IP•3Z1 AD (N O only) Actuator m arking available on IPP m odels (sym bol 10 m m m ax.). O n request. 1 0 4 IPR 1 0 4 IPP Ø12.00 (.472DIA) (.185) 4.70 Ø1 2.00 (.472DIA) (.185) 4.70 APPRO VAL UL C onsult factory for details of approved m odels. To order sw itches m arked U L, com plete above box w ith ”U L”. Show n w ith standard flying lead term inals. For TH IN flying leads, replace F w ith W . 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey 5 : yellow - 6 : red - 7/1 : w hite - 8 : bright chrom e 9 : orange - A : satin chrom e

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: IPC1FAD2 IPC1FAD2L0G IPC1FAD2L0Y IPC1FAD6 IPC1SAD1L0G IPC1SAD1L0Y IPC1SAD2 IPC1SAD3L0G IPC1SAD6 IPC1SAD6L0S IPR1FAD2 IPR1FAD2L0G IPR1FAD2L0Y IPR1FAD3L0G IPR1FAD6 IPR1FAD6L0S IPR1SAD1L0Y IPR1SAD2L0G IPR1SAD2L0S IPR1SAD2L0Y IPR1SAD3 IPR1SAD3L0G IPR1SAD5 IPR1SAD5104 IPR1SAD5L0S IPR1SAD6 IPR1SAD6104 IPR1SAD6L0S IPR1SAD2 IPC1SAD2L0S IPR1FAD2L0S IPR1SAD7/1L0S IPC1FAD2L0B IPC1Z1AD2L0B IPR1Z1AD1L0Y IPR1SAD5-LOS IPR1SAD2L0B IPR1SAD9LOS