IP4770CZ16 PHILIPS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
- General description The IP4770CZ16, IP4771CZ16, IP4772CZ16 is connected between the VGA/DVI interface and the video graphics controller and includes level shifting for the DDC signals, buffering for the SYNC lines as well as high-level ESD protection diodes for the RGB signal lines. The level shifting functions are required when the DDC controller operates at a lower supply voltage than the monitor. To use this level shifting function the gates of the two N-channel MOSFETs have to be connected to the supply rail of the DDC transceivers. Buffering for the SYNC signals is provided by two non-inverting buffers, which accept TTL input levels and convert these to CMOS compliant output levels between pins V CC(SYNC) and GND. The IP4770CZ16 and IP4771CZ16 contain the formerly external termination resistors, which are typically required for the HSYNC and VSYNC lines of the video interface:
- IP4770CZ16: Rsync = 55Ω
- IP4771CZ16: Rsync =6 5Ω
- IP4772CZ16: Rsync =10Ω to allow termination of the SYNC lines All RGB I/Os are protected by a special diode configuration offering a low line capacitance of 4 pF (maximum) only to provide protection to downstream components for ESD voltages as high as±8 kV contact discharge according to IEC 61000-4-2, level 4 standard. 2. Features n Integrated high-level ESD protection, buffering, SYNC signal impedance matching and level shifting n Terminal connections with integrated rail-to-rail clamping diodes with downstream ESD protection of±8 kV according to IEC 61000-4-2, level 4 standard n Backflow protection on DDC lines n Drivers for HSYNC and VSYNC lines n Bidirectional level shifting N-channel FETs available for DDC clock and DDC data channels n Integrated impedance matching resistors on SYNC lines n Line capacitance < 4 pF per channel n Lead-free package and RoHS compliant IP4770/71/72CZ16 VGA/video interface with integrated buffers, ESD protection and integrated termination resistors Rev. 01 — 25 October 2006 Product data sheet
Table 1. Ordering information IP4772CZ16: Rsync = Rbuffer and Rterm = 0Ω .
6.1 Pinning
6.2 Pin description
Table 2. Pin description
inductance, chip ceramic capacitor at each supply pin. Table 3. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to ground (GND).
- Recommended operating conditions
[2] R sync = Rterm + Rbuffer. [3] R sync = Rbuffer because Rterm = 0Ω . [4] This parameter is guaranteed by design and characterization. Table 4. Recommended operating conditions Table 5. Sync circuit characteristics VCC(SYNC) = 5 V; Tamb = 25°C; unless otherwise specified.
[1] This parameter is guaranteed by design and characterization. input VI(DDC_INx)= VCC(DDC) and output VO(DCC_OUTx) ≤ VCC(DCC) − 0.4 V. Table 6. Video circuit characteristics VCC(VIDEO) = 5 V; Tamb = 25°C; unless otherwise specified. Table 7. Level circuit characteristics VCC(DDC) = 5 V; Tamb = 25°C; unless otherwise specified.
IP4770CZ16_4771_4772_1 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 01 — 25 October 2006 7 of 11 NXP Semiconductors IP4770/71/72CZ16 VGA/video interface with ESD protection 10. Application information The IP4770CZ16, IP4771CZ16, IP4772CZ16 should be placed as close as possible to the VGA/DVI interface connector. The ESD protection channels VIDEO_1, VIDEO_2 and VIDEO_3 can be connected in any order with RBG signals. The 100 kΩ resistors between the DDC_OUTx channels and VCC_5V are optional. They may be used, if required, to pull-up the DDC_OUTx lines to VCC_5V when no monitor is connected to the VGA connector. Backflow current can flow between pins DDC_OUTx and VCC_5V via these resistors when VCC_5V is powered down. Fig 3. Application diagram 001aae819 100 kW 100 kW DDC_CLK DDC_DATA GREEN_GND BLUE_GND BLUE_VIDEO RED_GND RED_VIDEO DDC_CLK DIG_GND DDC_DATA HSYNC_OUT SYNC_GND VSYNC_OUT GREEN_VIDEO HSYNC VSYNC EMI-filter VIDEO_1 V CC(SYNC) VCC(DCC) VCC(VIDEO) VIDEO_2 VIDEO_3 3 · 75 W SYNC_OUT2 SYNC_IN2 SYNC_IN1 SYNC_OUT1 DCC_OUT2 DCC_IN2 DCC_IN1 DCC_OUT1 IP4770CZ16 IP4771CZ16 IP4772CZ16 BLUE FILTER GREEN FILTER RED FILTER VCC_5V VCCGPIO VCCA_DAC
IP4770CZ16_4771_4772_1 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 01 — 25 October 2006 8 of 11 NXP Semiconductors IP4770/71/72CZ16 VGA/video interface with ESD protection 11. Package outline Fig 4. Package outline SOT519-1 (SSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (1) eH E LL p Zywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.25 0.10 1.55 1.40 0.25 0.31 0.20 0.25 0.18 5.0 4.8 4.0 3.8 0.635 1 6.2 5.8 0.89 0.41 0.18 0.05 o o0.180.2 0.09 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.2 mm maximum per side are not included. SOT519-1 99-05-04 03-02-18 (1) w M bp D H E E Z e c v M A X A y 1 8 16 9 q A A 1 A 2 Lp detail X L (A )3 0 2.5 5 mm scale SSOP16: plastic shrink small outline package; 16 leads; body width 3.9 mm; lead pitch 0.635 mmSOT519-1 A max. 1.73
Table 8. Abbreviations Table 9. Revision history
IP4770CZ16_4771_4772_1 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 01 — 25 October 2006 10 of 11 NXP Semiconductors IP4770/71/72CZ16 VGA/video interface with ESD protection 14. Legal information
14.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
14.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
14.3 Disclaimers
General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
14.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 15. Contact information For additional information, please visit:http://www.nxp.com For sales office addresses, send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
NXP Semiconductors IP4770/71/72CZ16 VGA/video interface with ESD protection © NXP B.V. 2006. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 25 October 2006 Document identifier: IP4770CZ16_4771_4772_1 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 16. Contents