DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
1.1 General description
800 MHz while differential-mode signal extends out to more than 1 GHz before reaching
by ElectroStatic Discharge (ESD).
1.2 Features and benefits
1.3 Applications
1.4 Quick reference data
[1] This parameter is guaranteed by design. Table 1. Quick reference data
[1] D+ and D are interchangeable. Table 2. Pinning Table 3. Ordering information
- A marker indicating the pin A1 position.
- Two lines of characters or numbers: – The first line (placeholder <marking code>) indicates the marking code. Mapping of product type number to marking code is given in Table 4. – The second line (placeholder <lot ID>) indicates the production lot. This information enables tracking a device down to a particular production date. 5. Functional diagram Fig 2. IP3319CX6: outline of the marking
Table 4. Marking codes D+ and D- are interchangeable.
7.1 Electrical characteristics
[1] This parameter is guaranteed by design. [2] 100 ns Transmission Line Pulse (TLP); 50 ; pulser at 80 ns. Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 6. Electrical characteristics Tamb =2 5 C unless otherwise specified.
Product data sheet Rev. 1 — 30 January 2013 5 of 15 NXP Semiconductors IP3319CX6 1-channel common-mode filter with integrated ESD protection network The device uses an advanced clamping structure showing a negative dynamic resistance. This snap-back behavior strongly reduces the clamping voltage to the system behind the ESD protection during an ESD event. Do not connect unlimited DC current sources to the data lines to avoid keeping the ESD protection device in snap-back state after exceeding breakdown voltage (due to an ESD pulse for instance). Pin A2; tp = 100 ns; Transmission Line Pulse (TLP) Pin A2; tp = 100 ns; Transmission Line Pulse (TLP) Fig 4. Dynamic resistance with positive clamping Fig 5. Dynamic resistance with negative clamping Pin C2; tp = 100 ns; Transmission Line Pulse (TLP) Pin C2; tp = 100 ns; Transmission Line Pulse (TLP) Fig 6. Dynamic resistance with positive clamping Fig 7. Dynamic resistance with negative clamping /g68/g68/g68/g16/g19/g19/g25/g20/g22/g23 /g19 /g20 /g21 /g22/g23 /g24 /g25 /g26 /g27 /g19 /g22/g17/g24 /g26 /g20/g19/g17/g24 /g20/g23 /g57/g38/g47/g3/g11/g57/g12 /g44/g38/g47/g38/g47/g44/g38/g47 /g11/g36/g12/g11/g36/g12/g11/g36/g12 /g68/g68/g68/g16/g19/g19/g25/g20/g22/g24 /g16/g24/g16/g23/g16/g22/g16/g21/g16/g20/g19 /g16/g20/g23 /g16/g20/g19/g17/g24 /g16/g26 /g16/g22/g17/g24 /g19 /g57/g38/g47/g3/g11/g57/g12 /g44/g38/g47/g38/g47/g44/g38/g47 /g11/g36/g12/g11/g36/g12/g11/g36/g12 /g68/g68/g68/g16/g19/g19/g25/g20/g22/g25 /g19 /g20 /g21 /g22/g23 /g24 /g25 /g26 /g27 /g19 /g22/g17/g24 /g26 /g20/g19/g17/g24 /g20/g23 /g57/g38/g47/g3/g11/g57/g12 /g44/g38/g47/g38/g47/g44/g38/g47 /g11/g36/g12/g11/g36/g12/g11/g36/g12 /g68/g68/g68/g16/g19/g19/g25/g20/g22/g26 /g16/g24/g16/g23/g16/g22/g16/g21/g16/g20/g19 /g16/g20/g23 /g16/g20/g19/g17/g24 /g16/g26 /g16/g22/g17/g24 /g19 /g57/g38/g47/g3/g11/g57/g12 /g44/g38/g47/g38/g47/g44/g38/g47 /g11/g36/g12/g11/g36/g12/g11/g36/g12
7.2 Frequency characteristics
NetWork Analyzer (NWA) system. attenuation reaches a typical value of 25 dB in the GSM band. Table 7. Frequency characteristics
Product data sheet Rev. 1 — 30 January 2013 7 of 15 NXP Semiconductors IP3319CX6 1-channel common-mode filter with integrated ESD protection network Data rate: 480 Mbit/s (USB 2.0 High-speed) Vertical scale = 124 mV/div Horizontal scale = 260 ps/div Fig 9. USB 2.0 eye diagram Printed-Circuit Board (PCB) with IP3319CX6 Data rate: 480 Mbit/s (USB 2.0 High-speed) Vertical scale = 124 mV/div Horizontal scale = 260 ps/div Fig 10. USB 2.0 eye diagram PCB without IP3319CX6 (reference) /g68/g68/g68/g16/g19/g19/g25/g20/g22/g28 /g68/g68/g68/g16/g19/g19/g25/g20/g23/g19
Table 8. Package outline dimensions of WLCSP6
[1] For further information and the availability of packing methods, see Section 14. Table 9. Packing methods Table 10. Reflow soldering dimensions of WLCSP6
- Design and assembly recommendations
11.1 PCB design guidelines
recommended Printed-Circuit Board (PCB) design parameters.
11.2 PCB assembly guidelines for Pb-free soldering
Table 11. Recommended PCB design parameters Table 12. Assembly recommendations Solder reflow profile see Figure 13The device can withstand at least three reflows of this profile.
Table 13. Characteristics
Table 14. Revision history
Product data sheet Rev. 1 — 30 January 2013 13 of 15 NXP Semiconductors IP3319CX6 1-channel common-mode filter with integrated ESD protection network 13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
Product data sheet Rev. 1 — 30 January 2013 14 of 15 NXP Semiconductors IP3319CX6 1-channel common-mode filter with integrated ESD protection network Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP Semiconductors IP3319CX6 1-channel common-mode filter with integrated ESD protection network © NXP B.V. 2013. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 30 January 2013 Document identifier: IP3319CX6 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 15. Contents 11 Design and assembly recommendations . . . 10