IMX17 UTC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R215-001,B GENERAL PURPOSE DUAL TRANSISTOR
FEATURES
*Two 2SD1484K chips in an SMT package. *Mounting possible with SMT3 automatic mounting machine. *Transistor elements are independent, eliminating interference. *High collector current. Ic=500mA *Mounting cost an area can be cut in half. MARKING 132 645 1 7 123 45 6 Tr1 Tr2 SOT-26 PIN 1 : Collector (1) PIN 4: Collector (2) PIN 2: Base (2) PIN 5: Base (1) PIN 3: Emitter (2) PIN 6: Emitter (1)
UTC UNISONIC TECHNOLOGIES CO., LTD. 2 QW-R215-001,B The following characteristics apply to both Tr1 and Tr2. ABSOLUTE MAXIMUM RATINGS (Ta=25°C, unless otherwise specified.) PARAMETER SYMBOL RATING UNIT Collector-base voltage V CBO 60 V Collector-emitter voltage V CEO 50 V Emitter-base voltage V EBO 5 V Collector current Ic 500 mA Collector dissipation Pd 300 (TOTAL) mW (note) Junction Temperature T j 150 °C Storage Temperature T STG -55 ~ +150 °C Note: 200mW per element must not be exceeded. ELECTRICAL CHARACTERISTICS (Ta=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Collector-base breakdown voltage BV CBO Ic=100 µA 60 V Collector-emitter breakdown voltage BV CEO Ic=1mA 50 V Emitter-base breakdown voltage BV EBO I E=100µA 5 V Collector cutoff current I CBO V CB=30V 0.1 µA Emitter cutoff current I EBO V EB=4V 0.1 µA Collector-emitter saturation voltage V CE(sat) Ic=500mA, I B=50mA 0.6 V DC current gain hFE V CE=3V,Ic=100mA (note) 120 390 Transition frequency fT V CE=5V, IE=-20mA, f=100MHz 250 MHz Output capacitance Cob V CE=10V, IE=0A, f=1MHz 7 pF Note: Measured using pulse current. CLASSIFICATION OF hFE RANK A B RANGE 120-240 240-390 ELECTRICAL CHARACTERISTIC CURVES
UTC UNISONIC TECHNOLOGIES CO., LTD. 3 QW-R215-001,B UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.