IMT4T108

IMT4T108 ROHM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Rev.A 1/2 General purpose (dual transistors) IMT4 zFeatures 1) Two 2SA1514K chips in an AMT package. 2) High breakdown voltage. zPackage, marking, and Packaging specifications IMT4 SMT6 T108 3000 Part No. Package Marking Code Basic ordering unit (pieces) zExternal dimensions (Unit : mm) IMT4 ROHM : SMT6 EIAJ : SC-74 JEDEC : SOT-457 Each lead has same dimensions (6)(5)(4) 0.3Min. 0.15 0.3 1.1 0.8 0~0.1 (3) 2.8 1.6 1.9 2.9 0.95 (2) 0.95 (1) zEquivalent circuit IMT4 (4) Tr2 Tr1 (5) (6) (3) (2) (1) zAbsolute maximum ratings (Ta=25°C) Parameter Symbol VCBO VCEO VEBO IC Pc Tj Tstg Limits −120 −120 −50 300 (TOTAL) 150 −55 to +150 Unit V V V mA mW Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Storage temperature ∗200mW per element must not be exceeded. zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Conditions BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) −120 −120 −0.5 −0.5 −0.5 V V V µA µA V I C=−50µA IC=−1mA IE=−50µA VCB=−100V VEB=−4V IC/IB=−10mA/−1mA hFE 180 − 820 − VCE=−6V, IC−2mA Transition frequency fT − 140 − MHz ∗VCE=−12V, IE=2mA, f=100MHz ∗Transition frequency of the device. Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage

Rev.A 2/2 zElectrical characteristic curves COLLECTOR TO EMITTER VOLTAGE : VCE (V) −10COLLECTOR CURRENT : IC (mA) Fig.1 Ground emitter output characteristics Ta=25°C −25.0 −22.5 −20.0 −17.5 −15.0 −12.5 −10.0 −7.5 −5.0 −2.5µA IB=0 500 200 100 Fig.3 DC current gain vs. collector current DC CURRENT GAIN : hFE COLLECTOR CURRENT : IC (mA) Ta=25°C VCE= −1V −5V −3V BASE TO EMITTER VOLTAGE : VBE (V) −0.1 −0.2 −0.5 −10 −20 −50COLLECTOR CURRENT : IC (mA) Fig.2 Ground emitter propagation characteristics VCE= −6V Ta=25°C −0.05 −0.1 −0.2 −0.5 Fig.4 Collector-Emitter saturation voltage vs. collector currentCOLLECTOR SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR CURRENT : IC (mA) Ta=25°C IC/IB=50/1 500 200 100 0.5 1 2 5 10 20 50 VCE= −6V Fig.5 Transition frequency vs. emitter current TRANSITION FREQUENCY : fT (MHZ) EMITTER CURRENT : IE (mA) Ta=25°C f=1MHZ IE=0A Fig.6 Collector output capacitance vs. collector-base voltage COLLECTOR OUTPUT CAPACITANCE : Cob (pF) COLLECTOR TO BASE VOLTAGE : VCB (V) Ta=25°C Cob Fig.7 Emitter input capacitance vs. emitter-base voltage EMITTER INPUT CAPACITANCE : Cib (pF) EMITTER TO BASE VOLTAGE : VEB (V) Cib f=1MHZ IC=0A Ta=25°C

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.