DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 31
Technical content
User guide Please read the Important notice and the Safety precautions and the Warnings V1.0 www.infineon.com page 1 of 31 2020-10-16 UG-2020-19 REF_Fridge_D111T_ MOS user guide Refrigerator compressor driver reference design kit About this document Scope and purpose This user guide provides an overview of the reference design board REF_Fridge_D111T_MOS including its main features, key data, pin assignments and mechanical dimensions, and the guidance on how to run and design the motor with board. The REF_Fridge_D111T_MOS board is a complete reference design board designed for refrigerator compressors. It demonstrates the whole Infineon solution including digital motor control IC iMOTIONTM Smart Driver IMD111T-6F040 and the 600 V CoolMOSTM PFD7 super junction MOSFET. The REF_Fridge_D111T_MOS board is developed to support customers in designing their refrigerator compressor drivers with Infineon products. Intended audience This user guide is intended for technical specialists working with the REF_Fridge_D111T_MOS board and refrigerator compressor driver design. Reference Board/Kit Product(s) embedded on a PCB, with focus on specific applications and defined use cases that can include Software. PCB and auxiliary circuits are optimized for the requirements of the target application. Note: Boards do not necessarily meet safety, EMI, quality standards (for example UL, CE) requirements.
User guide 2 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit Important notice Important notice “Evaluation Boards and Reference Boards” shall mean products embedded on a printed circuit board (PCB) for demonstration and/or evaluation purposes, which include, without limitation, demonstration, reference and evaluation boards, kits and design (collectively referred to as “Reference Board”). Environmental conditions have been considered in the design of the Evaluation Boards and Reference Boards provided by Infineon Technologies. The design of the Evaluation Boards and Reference Boards has been tested by Infineon Technologies only as described in this document. The design is not qualified in terms of safety requirements, manufacturing and operation over the entire operating temperature range or lifetime. The Evaluation Boards and Reference Boards provided by Infineon Technologies are subject to functional testing only under typical load conditions. Evaluation Boards and Reference Boards are not subject to the same procedures as regular products regarding returned material analysis (RMA), process change notification (PCN) and product discontinuation (PD). Evaluation Boards and Reference Boards are not commercialized products, and are solely intended for evaluation and testing purposes. In particular, they shall not be used for reliability testing or production. The Evaluation Boards and Reference Boards may therefore not comply with CE or similar standards (including but not limited to the EMC Directive 2004/EC/108 and the EMC Act) and may not fulfill other requirements of the country in which they are operated by the customer. The customer shall ensure that all Evaluation Boards and Reference Boards will be handled in a way which is compliant with the relevant requirements and standards of the country in which they are operated. The Evaluation Boards and Reference Boards as well as the information provided in this document are addressed only to qualified and skilled technical staff, for laboratory usage, and shall be used and managed according to the terms and conditions set forth in this document and in other related documentation supplied with the respective Evaluation Board or Reference Board. It is the responsibility of the customer’s technical departments to evaluate the suitability of the Evaluation Boards and Reference Boards for the intended application, and to evaluate the completeness and correctness of the information provided in this document with respect to such application. The customer is obliged to ensure that the use of the Evaluation Boards and Reference Boards does not cause any harm to persons or third party property. The Evaluation Boards and Reference Boards and any information in this document is provided "as is" and Infineon Technologies disclaims any warranties, express or implied, including but not limited to warranties of non-infringement of third party rights and implied warranties of fitness for any purpose, or for merchantability. Infineon Technologies shall not be responsible for any damages resulting from the use of the Evaluation Boards and Reference Boards and/or from any information provided in this document. The customer is obliged to defend, indemnify and hold Infineon Technologies harmless from and against any claims or damages arising out of or resulting from any use thereof. Infineon Technologies reserves the right to modify this document and/or any information provided herein at any time without further notice.
User guide 3 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit Safety precautions Safety precautions Note: Please note the following warnings regarding the hazards associated with development systems. Table 1 Safety precautions Warning: The DC link potential of this board is up to 400 VDC. When measuring voltage waveforms by oscilloscope, high voltage differential probes must be used. Failure to do so may result in personal injury or death. Warning: The evaluation or reference board contains DC bus capacitors which take time to discharge after removal of the main supply. Before working on the drive system, wait five minutes for capacitors to discharge to safe voltage levels. Failure to do so may result in personal injury or death. Darkened display LEDs are not an indication that capacitors have discharged to safe voltage levels. Warning: The evaluation or reference board is connected to the grid input during testing. Hence, high-voltage differential probes must be used when measuring voltage waveforms by oscilloscope. Failure to do so may result in personal injury or death. Darkened display LEDs are not an indication that capacitors have discharged to safe voltage levels. Warning: Remove or disconnect power from the drive before you disconnect or reconnect wires, or perform maintenance work. Wait five minutes after removing power to discharge the bus capacitors. Do not attempt to service the drive until the bus capacitors have discharged to zero. Failure to do so may result in personal injury or death. Caution: The heat sink and device surfaces of the evaluation or reference board may become hot during testing. Hence, necessary precautions are required while handling the board. Failure to comply may cause injury. Caution: Only personnel familiar with the drive, power electronics and associated machinery should plan, install, commission and subsequently service the system. Failure to comply may result in personal injury and/or equipment damage. Caution: The evaluation or reference board contains parts and assemblies sensitive to electrostatic discharge (ESD). Electrostatic control precautions are required when installing, testing, servicing or repairing the assembly. Component damage may result if ESD control procedures are not followed. If you are not familiar with electrostatic control procedures, refer to the applicable ESD protection handbooks and guidelines. Caution: A drive that is incorrectly applied or installed can lead to component damage or reduction in product lifetime. Wiring or application errors such as undersizing the motor, supplying an incorrect or inadequate AC supply, or excessive ambient temperatures may result in system malfunction. Caution: The evaluation or reference board is shipped with packing materials that need to be removed prior to installation. Failure to remove all packing materials that are unnecessary for system installation may result in overheating or abnormal operating conditions.
User guide 4 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit Table of contents Table of contents
User guide 5 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit The reference board at a glance
1 The reference board at a glance
The REF_Fridge_D111T_MOS reference design kit is a part of the iMOTION™ reference design kit for motor drives, which is aimed at refrigerator-compressor driver applications. The kit is a ready-to-use solution in combination with full Infineon products such as 600 V CoolMOSTM PFD7 super-junction MOSFET in a small SOT223 package, and motor-control smart driver iMOTIONTM IMD111T-F040. It can easily be switched to a final mass production application board, and has a fast time to market. The REF_Fridge_D111T_MOS reference board is available from Infineon. The features of this board are described in Chapter 1.3 of this document (UG-2020-19). The remaining sections provide information to enable customers to copy, modify and qualify the design for production according to their own specific requirements. Environmental conditions have been considered in the design of the REF_Fridge_D111T_MOS. The design was tested as described in this document, but not qualified in terms of safety requirements or manufacturing and operation over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to functional testing only. The boards are not subject to the same procedures as regular products in terms of returned material analysis (RMA), process change notification (PCN) and product discontinuation (PD). Evaluation boards are intended to be used under laboratory conditions by specialists only.
1.1 Delivery content
The delivery content only contains the board as Figure 2 shown, the detail ordering information is indicated in the Table 2. The iMOTIONTM Link cable shown in the Figure 4 is mandatory for the tuning, and it is not included in the delivery content, please order it if you do not have, ordering information can be found in the Section 5.3. Table 2 Delivery content
1.2 Block diagram
Figure 1 Block diagram of the REF_Fridge_D111T_MOS reference board Base part number Package Standard pack Orderable part number Form Quantity REF_Fridge_D111T_MOS Boxed 1 REFFRIDGED111TMOSTOBO1
User guide 6 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit The reference board at a glance Figure 1 shows the block diagram of reference design kit REF_Fridge_D111T_MOS, and this document explains the features and details. Figure 2 depicts the functional groups of the board. Connecter definition details are described in section 3.4. Please see this section if you need more information. Figure 2 Functional groups on top side of board
1.3 Main features
REF_Fridge_D111T_MOS is a complete reference design board for refrigerator-compressor applications. Main features of the board include: iMOTION™ Smart Driver IMD111T-6F040 Ready-to-use motion controller with scripting engine and 6-channel silicon on insulator (SOI) driver 600 V CoolMOS™ PFD7 – optimized technology with lowest Qrr, ESD protection and compact SOT223 surface mounted device (SMD) package System solution enables best light-load efficiency and compact design Key features of iMOTION™ Smart Driver IMD111T-6F040 include: Motor controller with integrated high-voltage gate driver and voltage regulator Integrated 5 V low dropout regulator (LDO) allows single 15 V supply voltage Robust 600 V gate driver in thin-film SOI technology Gate driver integrated with ultra-fast bootstrap diodes Space saving LQFP 40-pin package with high-voltage creepage Motion control engine (MCE) as ready-to-use solution for variable speed drives 1. EMI filter and rectifier group 2. DC bus capacitors 3. Motor phase connector (J3) 4. CoolMOSTM MOSFET 5. Auxiliary power supply 6. IMD111T-6F040 7. AC line input connector (J1) 8. iMOTIONTM Link connector (J6) 9. Frequency input signal connector (J2)
User guide 7 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit The reference board at a glance Sensorless field-oriented control (FOC) for permanent magnet synchronous motor (PMSM) Flexible space vector PWM (3-phase PWM or 2-phase PWM) Motor-current sensing via single or leg shunt Optional analog or digital hall sensor interface Flexible host interface options for motor control commands: universal asynchronous receiver/transmitter (UART), frequency/duty cycle or analog VSP IEC60335-1/UL60730 Class B Safety Software certificate For more information about the above-mentioned products, refer to the corresponding reference materials.
1.4 Board parameters and technical data
Table 3 depicts the important specifications of the reference design REF_Fridge_D111T_MOS. Table 3 REF_Fridge_D111T_MOS board specifications Parameter Symbol Conditions / comments Value Unit Operation input voltage Vac Lower AC input, less motor power output 165 ~ 265 Vrms Maximum input current Iac(max) Input 220 VAC, Ta=25C 1.7 Arms Maximum input power Pin(max) Input 220 VAC, fPWM=5 kHz, Ta=25°C, Tcase= 100°C without heat sink 250 W Maximum motor current Imtr(max) Input 220 VAC, fPWM=5 kHz, Ta=25°C, Tcase= 100°C without heat sink
0.69 Arms
Maximum DC bus voltage Vdc(max) 400 V Shunt Resistance Rsh 250 mΩ Protection Current protection trigger level Itrip Set in the MCEWizard - Apeak Thermal protection level Tprotection Temperature gap between MOSFET’s case and NTC (negative temperature coefficient) sensor needs to be considered; recommended is a setting of maximum 105°C for the case temperature, considering the gap, set 75°C in the MCEWizard. 75 °C Auxiliary power supply 1 - 15V Output voltage Vout1 Used for IMD111T-6F040,integrate 5 V LDO in the IMD111T-6F040 15 ± 5% V Maximum output current Iout1 100 mA PCB characteristics Dimension Length × width × height 78×78×46 mm Material 1.6 mm thickness, 1 oz. copper FR4 System environment Ambient temperature Ta Non-condensing, maximum RH of 95% 0 ~ 50 °C
User guide 8 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description
2 System and functional description
2.1 Commissioning
Programm firmware/parameters/script Software/firmware preparation Open-loop diagnostic Closed-loop run 1- iMOTIONTM Link to bridge the MCE and PC 2- Connect AC source (J1) and motor (J3) 1- Program the firmware/parameters through the iMOITIONTM Link by MCEDesigner, IMD111T can be powered up by iMOTIONTM Link, or be powered by auxiliary power supply on the board after the AC source is powered 2- Program script file if available 1 - Install MCEDesigner/MCEWizard 2 - Download the firmware of MCE 3 - Generate parameters file (.txt) by MCEWizard, Which is used to transfer the hardware/motor parameters to register s values 4 - Generate script file if available 1- Power up AC power supply 2- Run build-in function VF diagnostic to verify current/DC bus sensing, hardware connection and parameters 1- Run motor in closed-loop mode by start motor function, tune the parameters Figure 3 Basic process for running the motor the first time This section describes how to get the system working when user first installs the board (refer to Figure 3 for general steps). The following items detail these steps. For those who are already familiar with the system, or have already run the board, unnecessary steps can be skipped depending on user’s actual situation. For more in-depth commissioning process requirements, please refer to the MCE reference manual or the corresponding reference material [4][5][6].
User guide 9 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description
2.1.1 Hardware connection
Figure 4 shows the hardware connection details for the reference design board. iMOTIONTM Link cable is needed to bridge the PC/debugger side and motor drive system (the target iMOTION™ device, hot side) with 1 kV DC galvanic isolation. Users can go to Section 5.3 for more information about iMOTIONTM Link. 1. Connect iMOTIONTM Link’s 8-pin cable to J6 with default pin order, and connect PC and iMOTIONTM Link with the USB wire. 2. Then connect AC power supply (J1) and the motor (J3). Figure 4 Hardware connection details
2.1.2 Software/firmware preparation
- The iMOTION™ software tools MCEDesigner and MCEWizard are required to set up the system, as well as to control and fine-tune the system performance to match users' exact needs. These tools are available for download via the Infineon website (http://www.infineon.com/imotion-software). Please check this page periodically for tool/software updates. 2. The MCE firmware then has to be downloaded on our website; select the proper version of the firmware based on your requirements. Included in the package are the firmware (‘.ldf’), default parameters (‘.txt’), default map file (‘.map’), the file for the MCEDesigner (‘.irc’) and other documents. 3. Generate your parameters’ file. Use MCEWizard to enter the target motor’s system and operating parameters, as well as reference board’s hardware parameters, which will then be used to calculate the controller’s digital parameter set representing the complete motor drive system.
User guide 10 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description After system and operating parameters are set, go to the “Verify & Save Page” and click on “Calculate” button. If no errors are reported, then save the drive parameter set in your project directory by clicking “Export to Designer file (.txt)” (Figure 7); if some errors are detected, double-click on the error message (highlighted in RED) and adjust the related parameters. Saved Drive System Parameter File will be later used for programmers. Note: After you log-in on myInfineon, you could download the default MCEwizard file (.mc2) for this board, you only need to modify the parameters related to your motor to make things easier and save time 4. Generate the script if available. For users who are running the board for the first time, it is recommended not to use this function first, but to add the script function after the motor performance commissioning is completed.
2.1.3 Program firmware/parameters/script
The REF_Fridge_D111T_MOS reference design kit is shipped with pre-programmed firmware and default parameters, since the functional tests were done before the shipment. Users need to program their parameters, as the motor is different from the one under test. The following steps have to be performed in order to make a blank IMD111T working: Program the firmware of the MCE Program parameter sets for system and motor Program customer script file (optional) Or Program the combined file , which is combined by MCEWi zard containing all three items above. Customer script file is optional depending on whether it is available. The c ombined file is usually used for production, since it only needs to be programmed once. The programming process is as follows: 1. Start the MCEDesigner tool and open MCEDesigner default configuration file (‘.irc’) for IMD111T device (IMD111T_Vxxx.irc) by clicking “File” > “Open.” Note: The IMD111T_Vxxx.irc file is included in the downloaded firmware package “IMD111T MCE Software Package.” 2. Power the iMOTIONTM control IC with 3.3 V. It is recommended to program the IC with the 3.3 V isolated power supply that comes from the iMOTIONTM Link; there is a switch on the iMOTIONTM Link to enable the 3.3 V output. The iMOTIONTM control IC will also be powered by the on-board auxiliary power supply after the AC source is powered, but caution due to high voltage. Note: The output voltage of LDO combined in the IMD111T-6F040 is 5 V, i.e. the controller of IMD111T- 6F040 is powered by 5 V. However, it is also possible to use the 3.3 V power supply in the iMOTIONTM Link to power the IMD111T-6F040 (for programmers). 3. MCEDesigner should automatically connect to the board using default COM port (Indicated by green circle next to “COMx Up” status in the bottom frame of the MCEDesigner GUI) when iMOTIONTM control IC is powered. If it cannot establish the connection due to an incorrect COM port, change COM port by doing the
User guide 12 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description Figure 7 MCEWizard verify and save page
2.1.4 Open-loop diagnostic
Double-click the “VF Diagnostic” function in the window of motor1, and monitor motor current with oscilloscope. If motor current is not sinusoidal, change register TargetSpeed and Vd_Ext in VF Diagnostic sub- function, then double-click “VF Diagnostic” until the oscilloscope shows a steady sinusoidal current with an amplitude of 30~50% motor rate current. Double-click “Iu & Iv_Slow” in System page > Monitor Definitions, the motor current feedback should be very clean and sinusoidal, as shown in Figure 8; otherwise please tune “Gating Propagation Delay & Phase Shift Window Size” in MCEWizard. “VF Diagnostic” sub-function can verify: If motor is connected correctly If IGBT(or MOSFET ) and gate driver work as expected If current-sensing related parameters are correctly configured If PCB layout and DC bus decoupling have been done correctly After “VF Diagnostic” is done, click STOP button (the red traffic light button) or run “stop motor” function to stop the motor.
2.1.5 Closed-loop run
we can try to run the motor in a closed-loop mode. The steps are listed below.
- Start the motor by clicking the green traffic light button in the control bar (or double click Start Motor sub-
will run if above step works well.
- Check the motor spin direction, adjust the connection order of the motor’s winding, or set negative
TargetSpeed in MCEDesigner if the direction is wrong.
- Set TargetSpeed to about 50% of maximum speed, start “Iu & Flx_M” trace with “Auto Repeat On Level,” see
Figure 9. Flx_M is good within the range of 2000~2500 (rated value is 2048), and must be steady and DC-like. constant and PLL PI bandwidth (parameters PLLKp and PLLKi) and releated setup need to be checked. If Flx_M is very noisy, current feedback and Vdc-related hardware and parameters need to be checked. If Flx_M does not come close to 2048, “Motor Back EMF Constant (Ke)” needs to be adjusted in MCEWizard.
User guide 14 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description Figure 9 Trace waveform for Iu & Flx-M at 50% speed 4. Once the firmware has been programmed, and a new parameters’ file has to be programmed, follow the same instructions given in Section 2.1.3. In this case, the firmware programming is no longer needed, and you can select the first option “Program Parameters.” Note: For detailed information on controller programming, refer to AN2018-33 iMOTION™ 2.0 Device Programming, MCEDesigner documentation and MCEWizard documentation.
2.2 Description of the functional blocks
2.2.1 Inverter stage
The inverter section is implemented with the 600 V CoolMOSTM PFD7 super-junction MOSFET in a small SOT223 package. The PFD7 high-voltage, n-channel MOSFET series combines best-in-class performance with state-of- the-art ease of use, shaped by Infineon’s experience of more than 20 years as a pioneer in super-junction technology innovation. The products come with an integrated fast body diode ensuring a robust device, and in turn, a reduced BOM for the customer. Figure 10 shows the diagram of the inverter and peripheral circuit.
User guide 15 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description Figure 10 Inverter and peripheral circuit
2.2.2 DC bus sensing and MCEWizard configuration
Figure 11 provides the DC bus sensing resistor details on the reference design. The high-side resistors are 2 MΩ and the low-side resistor is 20 kΩ, the default DC bus sensing voltage results in a range of 0 to 5 V on the ADC input, reflecting a range of 0 to 505 V. Figure 11 DC bus sensing
User guide 16 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description The hardware parameters need to be configured in MCEWizard as shown in Figure 12. Figure 12 DC bus sensing configuration in MCEWizard The Vdc-sensing, low-pass-filter time constant is ((R10 + R13) // R15) * C4= (2 MΩ // 20 kΩ) * 4.7 nF = 93.1 µs, C17 can be adjusted to higher capacitance for clean Vdc sensing.
2.2.3 Current sensing and over-current protection
2.2.3.1 Current sensing
The current sensing on this board uses only the RC network for operational bias and low-pass filter to minimize the cost. No additional operational amplifier is needed. Based on the principle of Kirchhoff's voltage law, and assuming the AD port input impedance is infinite, you obtain the equation below. 𝑉𝐴𝐷𝐶 = (𝑉𝑐𝑐 − 𝑉𝑠ℎ𝑢𝑛𝑡) 𝑅1 + 𝑅2 ∗ 𝑅1 + 𝑉𝑠ℎ𝑢𝑛𝑡 The equation can be transformed to two parts as shown here: 𝑉𝐴𝐷𝐶 = 𝑅2 ∗ 𝑉𝑠ℎ𝑢𝑛𝑡 𝑅1 + 𝑅2 + 𝑅1 ∗ 𝑉𝑐𝑐 𝑅1 + 𝑅2 The impedance of the RC network is much larger than the 𝑅𝑠ℎ𝑢𝑛𝑡, so it can be assumed that: 𝑉𝑠ℎ𝑢𝑛𝑡 = 𝐼𝑠ℎ𝑢𝑛𝑡 ∗ 𝑅𝑠ℎ𝑢𝑛𝑡
User guide 17 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description VADC can then be written as: 𝑉𝐴𝐷𝐶 = 𝑅2 𝑅1 + 𝑅2 ∗ 𝑅𝑠ℎ𝑢𝑛𝑡 ∗ 𝐼𝑠ℎ𝑢𝑛𝑡 + 𝑅1 ∗ 𝑉𝑐𝑐 𝑅1 + 𝑅2 Where 𝑅1∗𝑉𝑐𝑐 𝑅1+𝑅2 is the offset, and 𝑅1+𝑅2 ∗ 𝑅𝑠ℎ𝑢𝑛𝑡 is the gain of the shunt current. Figure 13 Current-sensing topology Use this board with, for example, R1 = R20 = 2 k, R2 = R8 = 22.1 k, Vcc = 5 V, offset = 0.415V, gain = 𝑅1+𝑅2 ∗ 𝑅𝑠ℎ𝑢𝑛𝑡 = 229.3 mV/A. Note the following points concerning current sampling: R8 & R20 also determine ADC operational bias for current sensing, which corresponds to the motor regeneration operation range. For those applications that do not work at regenerative brake mode, the bias can be as low as possible to reserve enough ADC range for the drive mode, since negative current to DC bus does not occur. Since the gain of the external RC circuit is less than 1, internal signal amplification is required to increase the ADC input voltage range with lower shunt value. If a larger shunt is chosen, the power loss and size are both larger. MCE provides an inner current sampling amplifier with *1, *3, *6 and *12 gain selections, which can be configured in the MCEWizard. There is no common mode noise-rejection ability without an outer operational amplifier, so the GND network of the PCB needs to be dealt with very carefully, since any voltage difference between IMD111T’s ADC ground and shunt resistor ground will be considered as an “input signal,” and will deteriorate control performance or increase audible noise.
User guide 18 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description Figure 14 Current-sensing circuit on the board
2.2.3.2 Over-current protection
The over-current condition can be detected by IMD111T-6F040 by the input sources as shown in Figure 15. Internal comparator in the IMD111T-6F040 Figure 15 Over-current protection on the board For more details about the over-current protection (OCP) in the IMD111T, refer to chapter on motor over- current protection in the reference material [6]. The internal comparator’s reference level is set by the internal DAC, the level can be set in the MCEWizard by “Device over-current trigger level setting for comparator” and “Motor1 current input to ADC offset voltage.” The DAC output pin REFU needs to be connected to a capacitor; 10 nF/16 V is used on the board.
2.2.4 NTC sensing and thermal protection
Pin 35 of IMD111T-6F040 is the ADC port dedicated to NTC temperature sampling. On the board, an NTC is connected to the ADC channel by the circuit shown in Figure 16. The position of the NTC on the board is shown in the Figure 17
User guide 20 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description Table 4 Thermistor characteristics with V = 5 V,R5=4.87 k Temperature (C) Resistance typ. (k) Vth (V) Vth register value 15.00 75.31 4.70 3846 20.00 59.25 4.62 3784 25.00 47.00 4.53 3711 30.00 37.57 4.43 3625 35.00 30.25 4.31 3527 40.00 24.52 4.17 3416 45.00 20.01 4.02 3293 50.00 16.43 3.86 3159 55.00 13.58 3.68 3014 60.00 11.28 3.49 2860 65.00 9.42 3.30 2700 70.00 7.92 3.10 2535 75.00 6.68 2.89 2369 80.00 5.67 2.69 2202 85.00 4.83 2.49 2039 90.00 4.13 2.30 1880 95.00 3.55 2.11 1727 100.00 3.06 1.93 1582 105.00 2.65 1.76 1445 110.00 2.31 1.61 1317 115.00 2.01 1.46 1198
2.3 Frequency-signal interface
Since current refrigerator applications mainly use frequency signals to control the compressor speed, the board is designed with a frequency-signal interface. Figure 18 shows the interface circuit. The input signal is isolated from the control and power parts on the board. The board has two types of input interface: 1. Square-wave interface (default, remove the D3, R15 ) 2. AC 220 V as the control input (you need to remove R18, and install D3, R15) Type 1 is a more common signal type, while type two is used less, leaving only the interface for customers who need it. Figure 18 Frequency-interface circuit
User guide 21 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System and functional description A typical square wave input signal for refrigerator applications is shown in Table 5 for reference. Table 5 Typical frequency/speed characteristic Signal frequency fn (Hz) Motor speed n (RPM) fn < 30 Stop 30 ≤ fn < 40 Minimum speed 40 ≤ fn < 150 30 * fn 150 ≤ fn < 200 Maximum speed fn ≥ 200 Stop
User guide 22 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System design
3 System design
This section provides the complete details of the schematics, layout and connectors. Please note that the schematics, routing and Gerber generation are done in Altium Designer. Customers who are interested in the original Altium format files or pdf files for better clarity can visit www.Infineon.com.
3.1 Schematics
The major function blocks are introduced in Section 2.2. Customers who are interested in further details can download the design files after logging in your account on infineon webpage.
3.2 Layout
The board is designed in two layers, and its dimensions are 78 mm × 78 mm, manufactured with 1 oz. (35 µm) copper thickness. The project is designed with Altium Designer, and all design files can be downloaded after logging in your account on Infineon webpage. Figure 19 Top view of the board
User guide 23 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System design Figure 20 Bottom view of the board Here are a few design tips to note for your reference: Thermal performance Maximizing the copper area of the collector could effectively reduce the IGBT junction temperature, so the board can deliver more power. Ground layout Since current sampling is non-differential and without op-amp, the ground area should be carefully laid out; the digital ground should refer to the shunt ground to ensure the sampling noise is correct.
3.3 Bill of material
The complete bill of material is available on the download section of the Infineon homepage. A log-in is required to download this material.
User guide 24 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System design Table 6 BOM of the most important/critical parts of the reference board S. No. Ref Designator Description Manufacturer Manufacturer P/N
1 U1 IC iMOTION SMART DRIVER Infineon
Technologies IMD111T-6F040
2 Q2, Q3, Q4, Q5, Q6,
600 V CoolMOS PFD7 SJ Power
Technologies IPN60R1K0PFD7S 3 Q1 MOSFET N-CH 30 V 2.7 A SOT-23-3 Infineon Technologies IRLML2030TRPBF
4 C19, C24 WCAP-CSGP General Purpose
Ceramic Capacitors, size 1206, 10 uF, +/-10%, 25 VDC Wurth Elektronik 885012208069
5 C21 WCAP-ATG8 Aluminum
Electrolytic Capacitors, 6.3x11 mm, 25 Vdc, 220 uF Wurth Elektronik 860010473011
6 C27, C28 WCAP-AT1H THT Aluminum
Electrolytic Capacitors, D16mm x VDC Wurth Elektronik 860241480001
7 C29, C30 WCAP-CSST Soft Termination
Ceramic Capacitors, size 1206, 22 nF, +/-10%, 500 VDC Wurth Elektronik 885382208010 8 J2 WR-WTB 2.54 mm Male Locking Header, 2p Wurth Elektronik 61900211121 9 J6 CONN HEADER VERT 8POS 2.54 mm Wurth Elektronik 61300821121
10 L1 WE-CMB Common Mode Power
Line Choke, Type XS, 4 mH, 1.5 A, 250 V Wurth Elektronik 744821240
11 RV1 WE-VD Disk Varistor, size 10 mm,
300 Vrms, 385 Vdc
Wurth Elektronik 820513011 12 RS1 RES 0.25 OHM 1% 3/4 W 2010
3.4 Connector details
Table 7 J1- AC line connector PIN Label Function
1 L AC line input
2 N AC neutral input
3 N AC neutral input
Table 8 J2- Frequency input signal connector PIN Label Function
1 Frequency input Frequency input signal, isolated by optocoupler
2 Frequency ground Frequency input signal ground, isolated by optocoupler
User guide 25 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System design Table 9 J3- Motor side connector PIN Label Function
1 W Connected to motor phase W
2 V Connected to motor phase V
3 U Connected to motor phase U
Table 10 J4- Earth connector PIN Label Function
1 Earth
Table 11 J6- iMOTIONTM link connector PIN Label Function
1 TXD1 User UART for script communication
2 RXD1 User UART for script communication
3 & 6 +3.3V On board 3.3 V supply 4 & 5 GND Ground
7 RXD0 MCEDesigner & firmware download
8 TXD0 MCEDesigner & firmware download
User guide 26 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System performance
4 System performance
4.1 Thermal characterization test
Figure 21 and Figure 22 show the thermal characterizations of REF_Fridge_D111T_MOS, based on 2 layers FR4 PCB with 1 oz. copper. The tests reported on were performed under the following conditions: tamb=25°C, Vac = 220 V with different input power until the MOSFET case reaches 100°C. There are two PWM frequencies (5 kHz and 16 kHz), and 3-phase modulation mode only. Figure 21 REF_Fridge_D111T_MOS thermal characterization case temperature – input power, ta = 25°C Table 12 Input power and current characterization Input power (W) 30 60 100 140 180 220 260 100 110 0 50 100 150 200 250 300 Case Temperature (℃) Input Power(W) REF_Fridge_D111T_MOS Thermal characterization, Ta = 25℃ 5kHz 16kHz
User guide 27 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit System performance Figure 22 REF_Fridge_D111T_MOS thermal characterization, case temperature - motor phase current, ta = 25°C
4.2 MOSFET dV/dt test
This section indicates the MOSFET turn-on and turn-off waveform, the oscilloscope probe is connected as shown in Figure 23. On the board, Rg (on) = 1 k, and Rg (off) = 47 . The dV/dt is calculated by the voltage varying from 10% to 90%. Figure 23 Drain-to-source voltage test - dV/dt control As shown in Figure 24 and Figure 25, when the low-side MOSFET turns on, the Vds dV/dt = 245 V/28.1 ns = 8.7 value to control MOSFET dv/dt if needed. 100 110 0.2 0.4 0.6 0.8 Case Temperature (℃) Phase current (A) REF_Fridge_D111T_MOS Thermal characterization, Ta = 25℃ 5kHz 16kHz
User guide 29 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit Reference and appendices
5 Reference and appendices
5.1 Abbreviations and definitions
CE Conformité Européenne EMI Electromagnetic interference UL Underwriters Laboratories
5.2 References
[1] Infineon Technologies AG. Datasheet of IPN60R1K0PFD7S (2019) V2.0 www.infineon.com [2] Infineon Technologies AG. Datasheet of IMD111T-6F040 (2020) V1.0 www.infineon.com [3] Infineon Technologies AG. Datasheet of IRLM2030TRPbF (2009) www.infineon.com [6] Infineon Technologies AG. iMOTION™ Motion Control Engine Software Reference Manual (2020) V1.3 www.infineon.com
5.3 Additional information
In order to initiate testing, customers are advised to order the iMOTIONTM Link, the information is listed in the Table 14. The Infineon’s components on the board are listed in the Table 14 as well, the customers can visit the corresponding webpage for more information. Table 14 Additional information of tools and infineon’s components Base part number Package Standard pack Orderable part number Form Quantity iMOTIONTM Link Container 1 IMOTIONLINK IMD111T-6F040 PG-LQFP-40 Tape and reel 1500 IMD111T6F040XUMA1 IPN60R1K0PFD7S PG-SOT223-3 Tape and reel 3000 IPN60R1K0PFD7SATMA1 IRLML2030TRPBF SOT-23 Tape and reel 3000 IRLML2030TRPBF
User guide 30 of 31 V1.0 2020-10-16 REF_Fridge_D111T_MOS user guide Refrigerator compressor driver reference design kit
Revision history
Date of release Description of changes 1.0 2020/10/16 Initial version
All referenced product or service names and trademarks are the property of their respective owners. Edition 2020-10-16 UG-2020-19 Published by Infineon Technologies AG
81726 Munich, Germany
© 2021 Infineon Technologies AG. All Rights Reserved. Do you have a question about this document? Email: erratum@infineon.com Document reference For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineo n Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.