IMH20T1G

IMH20T1G ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

 Semiconductor Components Industries, LLC, 2003 July, 2003 - Rev. 0 Publication Order Number: IMH20T1G/D IMH20T1G Dual Bias Resistor Transistor NPN Surface Mount

• Low V CC (sat) 80 mV max at IC/IB = 50 mA/2.5 mA
• High Current: IC = 600 mA max
• Lead Free Plating MAXIMUM RATINGS (TA = 25°C) Rating Symbol Value Unit Collector-Base Voltage V(BR)CBO 30 Vdc Collector-Emitter Voltage V(BR)CEO 15 Vdc Emitter-Base Voltage V(BR)EBO 5.0 Vdc Collector Current - Continuous IC 600 mAdc THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Power Dissipation* PD 300 mW Junction Temperature TJ 150 °C Storage Temperature Tstg - 55 to +150 °C *Total for both Elements SC-74 MARKING DIAGRAM xx M xx = Specific Device Code M = Date Code Device Package Shipping

ORDERING INFORMATION

IMH20T1G SC-74 3000/Tape & Reel †The “T1” suffix refers to a 7-inch reel. Q 1 http://onsemi.com (4) (5) (6) (1) (2) (3) SC-74

http://onsemi.com Q1 + Q2: NPN ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit Collector-Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 15 - Vdc Collector-Base Breakdown Voltage (IC = 50 Adc, IE = 0) V(BR)CBO 30 - Vdc Emitter-Base Breakdown Voltage (IE = 50 Adc, IC = 0) V(BR)EBO 5.0 - Vdc Collector-Base Cutoff Current (VCB = 20 Vdc, IE = 0) ICBO - 0.5 Adc Emitter-Base Cutoff Current (VEB = 4.0 V, IC = 0) IEBO - 0.5 Adc DC Current Gain (Note 1) (VCE = 5.0 Vdc, IC = 50 mAdc) hFE 100 600 - Collector-Emitter Saturation Voltage (IC = 50 mAdc, IB = 2.5 mAdc) VCE(sat) - 80 mV Input Resistance R 1 1.54 2.86 kΩ 1. Pulse Test: Pulse Width ≤ 300 s, D.C. ≤ 2%.

http://onsemi.com Notes

http://onsemi.com ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION JAPAN : ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone : 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. IMH20T1G/D Thermal Clad is a registered trademark of the Bergquist Company Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada