IMG-4312-3G ORING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

 Provide 2x10/100Base-T(x) port and single SIM card slot  High Speed Air Connectivity: WLAN interface support up to 150Mbps link speed  3.5G HSDPA Modem dial up included  Support Open VPN, PPTP VPN  Support DHCP forwarding through PPT P function  Update DNS Hostname: DDNS  Versatile modes & event alarm by e -mail.  Event warning by Syslog, Email, SNMP Trap  Support DNP 3  Redundant multiple host devices: 5 host devices:Virtual COM, TCP Server, TCP Client mode , UDP mode(4 IP Ranges)  12~48VDC power input on terminal block  1KV isolation for PoE P.D. (IMG-4312+-3G)  Rigid IP-30 housing design  Din-Rail and panel mounting enabled.  Support OpenWRT SDK for project IMG-4312-3G is an innovative 1 port RS-232/422/485 and 3G cellular Gateway with 2 port 10/100Base-T(X) port. IMG-4312-3G also provide IEEE802.11 b/g/n wifi interface which have 150Mbps link speed. It could be configured to connect to the internet by dialing up 2G/3G cellular modem to fulfill demands of various applications rapidly a. In addition, IMG-4312-3G can also transfer data into 5 host PCs simultaneously for backup purposes. In addition, IMG-4312+-3G also IMG-4312-3G is one of the best solutions for applications of wireless and serial communication. Application IMG-4312-3G support 2G/3G Modem dial up. The utility- M2M-Tool which is used to manage and monitor all of the serial ports on IMG-4312-3G. IMG-4312-3G series Industrial IEEE 802 .11 b/g/n 3 G Cellular Router with 2x10/100Base-T(X) 1x RS-232/422/485 Gateway M2M Gateway Connection Redundancy 5 host devices

  • All specifications are subject to change without notice. Designed for Rugged Excellence Pin Definition Pin # RS-232 RS-422 RS-485 ( 4 wire ) RS-485 ( 2 wire )

1 DCD TX- TX- DATA -

2 RXD TX+ TX+ DATA +

3 TXD RX+ RX+

4 DTR RX- RX-

5 GND GND GND

6 DSR

7 RTS

8 CTS

  • All specifications are subject to change without notice. Designed for Rugged Excellence Specifications ORing Device Server Model IMG-4312-3G IMG-4312+-3G Physical Ports 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX PoE P.D Port P.O.E.Present at ETH1 Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min Sim card slot 1 Cellular Interface Antenna Connector 2 x RP-SMA Female Cellular Standard GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA Band Option Dual-band : HSUPA 1900/2100 MHz Quad-band : GSM/GPRS/EDGE 850/900/1800/1900 MHz WCDMA/HSDPA 850/900/1900/2100 MHz Wifi Interface Antenna Connector 1 x RP-SMA Female Modulation IEEE802.11b: CCK/DQPSK/DBPSK IEEE802.11g: OFDM IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM Frequency Band America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) Transmission Rate 802.11b: 1/2/5.5/11 Mbps 802.11n(40MHz): UP to 150 Mbps Transmit Power 802.11b: 19dBm ± 1.5dBm 802.11g: 17dBm ± 1.5dBm 802.11n(2.4G@20MHz): 16dBm ± 1.5dBm 802.11n(2.4G@40MHz): 14dBm ± 1.5dBm Receiver Sensitivity 802.11b: -90dBm ± 2dBm@1Mbps 802.11g: -72dBm ± 2dBm@54Mbps 802.11n(2.4G@40MHz,MCS7): -68dBm ± 2dBm Encryption Security WEP: (64-bit ,128-bit key supported) WPA/WPA2 :802.11i(WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption Serial Ports Connector DB9 x 1 Operation Mode RS-232/422/485 Serial Baud Rate 110 bps to 115.2 Kbps Data Bits 7, 8 Parity odd, even, none, mark, space Stop Bits 1, 1.5, 2 RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Flow Control XON/XOFF, RTS/CTS, DTR/DSR Network Protocol Protocol ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, DDNS, PPPoE LED indicators
  • All specifications are subject to change without notice. Designed for Rugged Excellence Power indicator 3 x LEDs, PWR 1(2)(PoE) / Ready: Green On: Power is on 10/100TX RJ45 port indicator 2 x LEDs, Green for port Link/Act at 100Mbps. Serial TX / RX LEDs: Red: Serial port is receiving data Green: Serial port is transmitting data WIFI LED 1 x LED, Green: WIFI Link /ACT WAN LED 1 x LED, Green On : Power is on and functioning Normal Power Redundant Input power Dual DC inputs. 12-48VDC on 6-pin terminal block Power consumption (Typ.) 4.8W 5.3W Overload current protection Present Reverse polarity protection Present on terminal block Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 45(W)x80.6(D)x95(H) mm Weight (g) 368 372 Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -10 to 60oC (14 to 140oF) Operating Humidity 5% to 95% Non-condensing Regulatory approvals EMI FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years Packing List O  IMG-4312-3G x 1  Wall-Mount Kit x 1  2.4G wifi antenna x 1  CD x 1  Din-Rail Kit x 1  3G antenna x 2  Quick Installation Guide x 1 Optional Accessories O  DR-45 series : 45 Watts power supply  DR-120 series : 120 Watts power supply  DR-75 series : 75 Watts power supply