IMB42CGR | DigiCamel IC Datasheet

Online Datasheet

Read IMB42CGR online.

IM-B TEC | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 4

Technical content

01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays IM - B Relay n Minimum board-space 60mm2 n Slim line 10x6mm (0.39x0.24”) and low profile 5.65mm (0.222”) n Switching power 60W/62.5VA n Switching voltage 220VDC/250VAC n Switching current 2A n Bifurcated contacts n High mechanical shock resistance Typical applications Telecommunication, access and transmission equipment, optical network terminals, modems, office and business equipment, consumer electronics, measurement and Test equipment, industrial control, medical equipment Approvals UL 508 File No. E 111441 Technical data of approved types on request Contact Data Contact arrangement 1 form A (1 NO) Max. switching voltage 220VDC, 250VAC Rated current 2A Limiting continuous current 2A Switching power 60W, 62.5VA Contact material PdRu Au covered Contact style twin contacts Minimum switching voltage 100µV Initial contact resistance <100mΩ at 10mA/30mV Thermoelectric potential <10µV Operate time typ. 1ms, max. 3ms Release time without diode in parallel typ. 1ms, max. 3ms with diode in parallel typ. 3ms, max. 5ms Bounce time max. typ. 1ms, max. 5ms Electrical endurance at contact application 0 (≤ 30mV / ≤ 10mA) min. 2.5x106 operations cable load open end min. 2.0x106 operations resistive, 125VDC / 0.24A - 30W min. 5x105 operations resistive, 220 VDC / 0.27A - 60W min. 1x105 operations resistive, 250VAC / 0.25A - 62.5VA min. 1x105 operations resistive, 30VDC / 1A - 30W min. 5x105 operations resistive, 30VDC / 2A - 60W min. 1x105 operations Contact data (continued) UL contact rating 30VDC, 2A, 60W, NO only 110VDC, 0.3A, 33W 220VDC, 0.27A, 60W 125VAC, 0.5A, 62.5W 250VAC, 0.25A, 62.5W Mechanical endurance 108 operations Coil Data Magnetic system monostable, bistable Coil voltage range 1.5 to 24VDC Max. coil temperature 125°C Thermal resistance <150K/W Coil versions, standard version, monostable, 1 coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 01 3.0 2.25 0.30 64 140 02 4.5 3.38 0.45 145 140 03 5.0 3.75 0.50 178 140 06 12.0 9.00 1.20 1029 140 All figures are given for coil without pre-energization, at ambient temperature +23°C Insulation C* high 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 21 of 28 AXICOMÊSignalÊRelays IM Relay Contact Data IM-A IM-B IM-C IM-D IM-E Number of contacts and type 1ÊPoleÊbr eak 1ÊPoleÊmake 1ÊPole ÊÊ changeover 2ÊPoleÊbr eak 2ÊPoleÊmak e Contact assembly Bifur catedÊcontacts Contact material Palladium-ruthenium,Êgold-cover ed Limiting continuous current at max. ambient temperature 2ÊA2 ÊA 4Ê A2 ÊA 2Ê A Maximum switching current 2ÊA 2ÊA 3ÊA 2ÊA 2Ê A Maximum swichting voltage 220ÊVdc 250ÊV ac Maximum switching capacity 60ÊW ,Ê62.5Ê VA Thermoelectric potential <Ê10Êµ V Minimum switching voltage 100Êµ V Initial contact resistance / measuring condition: 10 mA / 20 mV < 100 m/uni03A9 < 100 m/uni03A9 NO < 100 m/uni03A9 < 50 m/uni03A9 < 50 m/uni03A9 endurance (≤ 30 mV / ≥ 10 mA) cable load open end Resistive load at 125 Vdc / 0.24 A - 30 W at 220 Vdc / 0.27 A - 60 W at 250 V ac / 0.25 A - 62.5 VA at 30 Vdc / 1 A - 30 W at 30 Vdc / 2 A - 60 W min.Ê2.5ÊxÊ1 0 6 Êoperations min.Ê2.0ÊxÊ1 0 6 Êoperations min.Ê5ÊxÊ10 5 Êoperations min.Ê1ÊxÊ1 0 5 Êoperations min.Ê1ÊxÊ1 0 5 Êoperations min.Ê5ÊxÊ1 0 5 Êoperations min.Ê1ÊxÊ1 0 5 Êoperations Mechanical endurance typ.Ê10 8 Êoperations UL contact ratings 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA

30 Vdc / 2 A - 60 W

Max. DC Load Breaking Capacity DC V oltage [Vdc] DC current [A] r esistive load Max. DC load breaking capacity Coil operating range U IM_AB

01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays IM - B Relay (Continued) dielectric version Initial dielectric strength between open contacts 2500Vrms between contact and coil 3500Vrms Initial surge withstand voltage between open contacts 3500V between contact and coil 4900V Initial insulation resistance between insulated elements >109Ω Capacitance between open contacts max. 1pF between contact and coil max. 2pF between adjacent contacts max. 2pF RF Data Isolation at 100MHz/900MHz 37.0dB/18.8dB Insertion loss at 100MHz/900MHz 0.03dB/0.33dB Voltage standing wave ratio (VSWR) at 100MHz/900MHz 1.06/1.49 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40°C to +85°C Thermal resistance < 150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Degree of protection IEC 60529 IP 67, immersion cleanable Vibration resistance (functional) 20g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 500g Weight max. 0.75g Resistance to soldering heat THT IEC 60068-2-20 265°C/10s Resistance to soldering heat SMT IEC 60068-2-58 265°C/10s Moisture sensitive level, JEDEC J-Std-020D MSL3 Ultrasonic cleaning not recommended Packaging/unit THT version tube/50pcs., box/1000 pcs. SMT version reel/1000 pcs., box/1000 or 5000 pcs. THT version Dimensions SMT version Standard version Gull wings PCB layout TOP view on component side of PCB THT mounting holes SMT - solder pads 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 10 of 28 AXICOMÊSignalÊRelays IM-A Relay 1 Pole Break / 1 Form B / SPST NC IMÊTHT Standard IMÊSMT GullÊWings mm inch mm inch L W H 10.00Ê±Ê0.08 6.00Ê±Ê0.08 5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 10.00Ê±Ê0.08 ÊÊ6.00Ê±Ê0.08 ÊÊ5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 THT Version Standard Version SMT Version Mounting Hole Layout View onto the component side of the PCB (top view) Solder Pad Layout View onto the component side of the PCB (top view) Dimensions IM-A Dimensions in mm Terminal Assignment Relay – top view Non-Latching Type not energized condition Latching Type, 1 Coil reset condition Coplanarity ≤ 0.1mm T Tw S 3.2 N/A 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.40 0.75 0.125 N/A 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 0.029 N/A 7.50Ê±Ê0.30 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.4 N/A N/A 0.295Ê±Ê0.011 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 N/A 10.0±0.08 6.0±0.08 5.08±0.15.4±0.15 0.4 5.65-0.23.2 0.75 10.0±0.08 6.0±0.08 7.5±0.35.4±0.15 0.4 5.65-0.2 5.08±0.1 Coplanarity ≤0.1mm 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 10 of 28 AXICOMÊSignalÊRelays IM-A Relay 1 Pole Break / 1 Form B / SPST NC IMÊTHT Standard IMÊSMT GullÊWings mm inch mm inch L W H 10.00Ê±Ê0.08 6.00Ê±Ê0.08 5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 10.00Ê±Ê0.08 ÊÊ6.00Ê±Ê0.08 ÊÊ5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 THT Version Standard Version SMT Version Mounting Hole Layout View onto the component side of the PCB (top view) Solder Pad Layout View onto the component side of the PCB (top view) Dimensions IM-A Dimensions in mm Terminal Assignment Relay – top view Non-Latching Type not energized condition Latching Type, 1 Coil reset condition Coplanarity ≤ 0.1mm T Tw S 3.2 N/A 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.40 0.75 0.125 N/A 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 0.029 N/A 7.50Ê±Ê0.30 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.4 N/A N/A 0.295Ê±Ê0.011 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 N/A 10.0±0.08 6.0±0.08 5.08±0.15.4±0.15 0.4 5.65-0.23.2 0.75 10.0±0.08 6.0±0.08 7.5±0.35.4±0.15 0.4 5.65-0.2 5.08±0.1 Coplanarity ≤0.1mm Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. Terminal assignment TOP view on relay IM-B, 1 form A (NO) 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 12 of 28 AXICOMÊSignalÊRelays IM-B Relay 1 Pole Make / 1 Form A / SPST NO IMÊTHT Standard IMÊSMT GullÊWings mm inch mm inch L W H 10.00Ê±Ê0.08 6.00Ê±Ê0.08 5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 10.00Ê±Ê0.08 ÊÊ6.00Ê±Ê0.08 ÊÊ5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 THT Version Standard Version SMT Version Gull Wings Mounting Hole Layout View onto the component side of the PCB (top view) Solder Pad Layout View onto the component side of the PCB (top view) Dimensions IM-B Dimensions in mm Terminal Assignment Relay – top view Non-Latching Type not energized condition Latching Type, 1 Coil reset condition Coplanarity ≤ 0.1mm T Tw S 3.2 N/A 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.40 0.75 0.125 N/A 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 0.029 N/A 7.50Ê±Ê0.30 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.4 N/A N/A 0.295Ê±Ê0.011 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 N/A 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 12 of 28 AXICOMÊSignalÊRelays IM-B Relay 1 Pole Make / 1 Form A / SPST NO IMÊTHT Standard IMÊSMT GullÊWings mm inch mm inch L W H 10.00Ê±Ê0.08 6.00Ê±Ê0.08 5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 10.00Ê±Ê0.08 ÊÊ6.00Ê±Ê0.08 ÊÊ5.65ÊÐÊ0.20 0.393Ê±Ê0.003 0.236Ê±Ê0.003 0.222ÊÐÊ0.008 THT Version Standard Version SMT Version Gull Wings Mounting Hole Layout View onto the component side of the PCB (top view) Solder Pad Layout View onto the component side of the PCB (top view) Dimensions IM-B Dimensions in mm Terminal Assignment Relay – top view Non-Latching Type not energized condition Latching Type, 1 Coil reset condition Coplanarity ≤ 0.1mm T Tw S 3.2 N/A 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.40 0.75 0.125 N/A 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 0.029 N/A 7.50Ê±Ê0.30 5.08Ê±Ê0.10 3.20Ê±Ê0.15 2.20Ê±Ê0.15 0.4 N/A N/A 0.295Ê±Ê0.011 0.200Ê±Ê0.004 0.126Ê±Ê0.006 0.087Ê±Ê0.006 0.015 N/A *this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applica- tion as recommended per the applicable product specification. It is clarified that the usage of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration.

01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays IM - B Relay (Continued) Recommended soldering conditionsProcessing 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 25 of 28 AXICOMÊSignalÊRelays IM Relay Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B Infrared Soldering: Temperature/Time Proﬁle (Lead and Housing Peak Temperature) 240°C 180°C 130°C 100°C 20-40sec Full line: typical Dottedline: processlimits forced cooling Time (s) Temperature °C Time (s) Infrared Soldering: Temperature/Time Proﬁle (Lead and Housing Peak Temperature) Temperature °C Time (s) Recommended Soldering Conditions Recommended Reﬂow Soldering Proﬁle Resistance to Soldering Heat - Reﬂow Proﬁle Temperature °C Vapor Phase Soldering: Temperature/Time Proﬁle (Lead and Housing Peak Temperature) 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 25 of 28 AXICOMÊSignalÊRelays IM Relay Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B Infrared Soldering: Temperature/Time Proﬁle (Lead and Housing Peak Temperature) 240°C 180°C 130°C 100°C 20-40sec Full line: typical Dottedline: processlimits forced cooling Time (s) Temperature °C Time (s) Infrared Soldering: Temperature/Time Proﬁle (Lead and Housing Peak Temperature) Temperature °C Time (s) Recommended Soldering Conditions Recommended Reﬂow Soldering Proﬁle Resistance to Soldering Heat - Reﬂow Proﬁle Temperature °C Vapor Phase Soldering: Temperature/Time Proﬁle (Lead and Housing Peak Temperature) Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020D Recommended reflow soldering profile Resistance to soldering heat - Reflow profile Vapor Phase Soldering: temperature/time profile (lead and housing peak temperature) Infrared Soldering: temperature/ time profile (lead and housing peak temperature) Packing 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box Tube for THT version 50 relays per tube, 1000 relays per box 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box Tape and reel for SMT version 1000 relays per reel, 1000 or 5000 relays per box Reel dimensions 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box 108-98001 Rev. M All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box

01-2016, Rev. 0116 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. AXICOM Signal Relays IM - B Relay (Continued) Product code structure Typical product code IM B 03 G R Type IM Signal Relays IM Series IMA/IMB Contact arrangement B 1 form A, 1 NO Coil Coil code: please refer to coil versions table Performance type Blank Standard version C High Dielectric Version Terminals T THT - standard G SMT-gull wing Packing S Tube R Reel Product code Arrangement Perf. type Coil Coil type Terminals Part number IMB01CGR 1 form A, High dielectric 3VDC Monostable SMT gull wing 1462041-1 IMB01CTS 1 NO THT standard 1462041-4 IMB02CGR contact 4.5VDC SMT gull wing 1462041-2 IMB02CTS THT standard 1462041-5 IMB03CGR 5VDC SMT gull wing 1462041-7 IMB03CTS THT standard 1462041-8 IMB04CGR 6VDC SMT gull wing 1462041-9 IMB06CGR 12VDC 1462041-3 IMB06CTS THT standard 1462041-6 IMB07CGR 24VDC SMT gull wing 1-1462041-3 IMB07CTS THT standard 1-1462041-4 IMB42CGR 4.5VDC Bistable SMT gull wing 1-1462041-6 IMB42CTS THT standard 1-1462041-5

Product Information

IMB42CGR specifications and overview.

Summary

Signal Relays

Description

Signal Relays

Source title IMB42CGR Datasheet(PDF) - TE Connectivity Ltd

Related Parts

More parts from the same family.

Browse manufacturer