EMB10 ROHM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Rev.A 1/2 General purpose (dual digital transistors) EMB10 / UMB10N / IMB10A zFeatures 1) Two DTA123J chips in a EMT or UMT or SMT package. 2) Mounting possible with EMT3 or UMT3 or SMT3 automatic mounting machines. 3) Transistor elements are independent, eliminating interference. 4) Mounting cost and area can be cut in half. zStructure Epitaxial planar type PNP silicon transistor (Built-in resistor type) The following characteristics apply to both DTr1 and DTr2. zEquivalent circuit EMB10 / UMB10N IMB10A DTr2 DTr1 (3) (2) (1) (3) (2) (1) (4) (5) (6) (4) (5) (6) R1 R2 R2 R1 DTr2 DTr1 R1 R2 R2 R1 R2=47kΩ R1=2.2kΩ R2=47kΩ R1=2.2kΩ zAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Limits Unit VCC −50 V −12 VVIN IO −100 mA IC (Max.) −100 Tj 150 ˚C Tstg −55 to +150 ˚C Pd EMB10, UMB10N 150 (TOTAL) mW IMB10A 300 (TOTAL) Supply voltage Input voltage Output current Junction temperature Storage temperature Power dissipation ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. zExternal dimensions (Unit : mm) ROHM : EMT6 EMB10 ROHM : UMT6 EIAJ : SC-88 UMB10N ROHM : SMT6 EIAJ : SC-74 IMB10A Abbreviated symbol : B10 Abbreviated symbol : B10 Abbreviated symbol : B100.22 1.2 1.6 (1) (2)(5) (3) (6) (4) 0.13 0.5 0.50.5 1.0 1.6 Each lead has same dimensions 0to0.1 (6) 2.0 1.30.9 0.15 0.7 0.1Min. 2.1 0.65 0.2 1.25 (1) 0.65 (4) (3) (2) (5) Each lead has same dimensions (6)(5)(4) 0.3to0.6 0.15 0.3 1.1 0.8 0to0.1 (3) 2.8 1.6 1.9 2.9 0.95 (2) 0.95 (1) Each lead has same dimensions
Rev.A 2/2 zElectrical characteristics (Ta = 25°C) Parameter Symbol VI (off) VI (on) VO (on) II IO (off) GI R2 / R1 Min. −1.1 1.54 −0.1 2.2 −0.5 −0.3 −3.6 −0.5 2.86 V VCC=−5V, IO=−100µA VO=−0.3V, IO=−5mA IO/II=−5mA/−0.25mA VI=−5V VCC=−50V, VI=0V VO=−5V, IO=−10mA V mA µA kΩ Typ. Max. Unit Conditions −fT 250 − VCE=−10V, IE=5mA, f=100MHz ∗MHz Input voltage Output voltage Input current Output current Input resistance DC current gain Transition frequency Resistance ratio ∗ Transition frequency of the device zPackaging specifications Package Code TN T148 3000 3000 Taping Basic ordering unit (pieces) UMB10N T2R 8000 EMB10 IMB10A Type zElectrical characteristic curves VO=−0.3V Fig.1 Input voltage vs. output current (ON characteristics) INPUT VOLTAGE : VI (on) (V) OUTPUT CURRENT : IO (A) −100 −50 −20 −10 −500m −200m −100m 25˚C 100˚C Ta=−40˚C VCC=−5V Ta=100˚C 25˚C −40˚C 0 −3 −10m −2m −5m −1m −200µ −500µ −100µ −20µ −50µ −10µ −2µ −1µ −5µ INPUT VOLTAGE : VI (off) (V) OUTPUT CURRENT : Io (A) Fig.2 Output current vs. input voltage (OFF characteristics) VO=−5V DC CURRENT GAIN : GI Fig.3 DC current gain vs. output current 25˚C −40˚C Ta=100˚C OUTPUT CURRENT : IO (A) 500 200 100 lO/lI =20 −500m −200m −100m −10m −50m −5m −20m −-2m −1m Ta=100˚C 25˚C −40˚C OUTPUT CURRENT : IO (A) OUTPUT VOLTAGE : VO (on) (V) Fig.4 Output voltage vs. output current
Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.