2-1462041-2 TEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

FEATURES

  • Minimum board-space 60mm2
  • Slim line 10x6mm (0.39x0.24”) and low profile 5.65mm (0.222”)
  • Switching power 60W / 62.5VA (150VA for IMBxxI)
  • Switching voltage 220VDC / 250VAC (400VDC for IMBxxI)
  • Switching current 2A
  • Bifurcated or single contacts
  • High mechanical shock resistance

APPLICATIONS

  • Telecommunication
  • Access and transmission equipment
  • Optical network terminals
  • Modems
  • Office and business equipment
  • Consumer electronics
  • Measurement and test equipment
  • Industrial
  • Control
  • Medical equipment
  • HVAC APPROVALS
  • UL 61810-1 (former UL 508) File No. E214025 TE Connectivity (TE)’s Axicom IM-B signal relays, as part of our smallest types of relays, offer a wide range of variations suitable for many applications. The IM-B series are equipped with a 1 pole normally open contact, available as high dielectric or high load version.

Contact arrangement 1 Form A, 1 NO Max. switching voltage 220VDC 250VAC 400VDC 250VAC Rated current 2A 2A Limiting continuous current 2A 2A Contact material PdRu Au covered AgNi Au covered Contact style Twin contacts Single contacts Minimum switching voltage 100μV Initial contact resistance <100mΩ at 10mA/30mV Thermoelectric potential <10μV Operate time Typ. 1ms, max. 3ms Release time Without diode in parallel Typ. 1ms, max. 3ms With diode in parallel Typ. 1ms, max. 3ms Bounce time max. Typ. 1ms, max. 5ms Electrical endurance At contact application 0 (≤ 30mV / ≤ 10mA) min. 2.5x106 operations Cable load open end min. 2x106 operations Resistive, 125VDC / 0.24A - 30W min. 5x105 operations Resistive, 220 VDC / 0.27A - 60W min. 1x105 operations Resistive, 250VAC / 0.25A - 62.5VA min. 1x10⁵ operations Resistive, 30VDC / 1A - 30W min. 5x10⁵ operations Resistive, 30VDC / 2A - 60W min. 1x10⁵ operations UL contact rating 30VDC, 2A, 60W 110VDC, 0.3A, 33W 220VDC, 0.27A, 60W 400VDC, 0.15A 60W (only IMBxxI) 125VAC, 0.5A 62.5VA 125VAC, 0.8A 100VA (only IMBxxI) 250VAC, 0.25A, 62.5VA 250VAC, 0.6A, 150VA (only IMBxxI) Mechanical endurance 10⁸ operations CONTACT DATA Magnetic system Monostable, bistable Coil voltage range 1.5 to 24VDC COIL DATA MAX. DC LOAD BREAKING CAPACITY COIL OPERATING RANGE Coil code Rated voltage VDC Operate voltage VDC) Release voltage VDC Coil resistance Ω±10% Rated coil power mW 00 1.5 1.13 0.15 16 140 08 2.4 1.80 0.24 41 140 01 3 2.25 0.30 64 140 02 4 3.38 0.45 145 140 03 5 3.75 0.50 178 140 04 6 4.50 0.60 257 140 05 9 6.75 0.90 579 140 06 12 9.00 1.20 1029 140 07 24 18.00 2.40 2880 200 COIL VERSIONS, STANDARD VERSION, MONOSTABLE,

1 COIL

All figures are given for coil without pre-energization, at ambient temperature +23°C

C* I High Dielectric version High Load version Initial dielectric strength Between open contacts 2500Vrms 1000Vrms Between contact and coil 3500Vrms 1800Vrms Initial surge withstand voltage Between open contacts 3500Vrms 1500Vrms Between contact and coil 4900Vrms 2500Vrms Initial insulation resistance Between insulated elements >10⁹Ω Capacitance Between open contacts max. 1pF Between contact and coil max. 2pF Between adjacent contacts max. 2pF INSULATION *this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks to air during normal application as recommended per the applicable product specification. It is clarified that the usage of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration. Material compliance EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www. te.com/customersupport/ rohssupportcenter Ambient temperature -40°C to +85°C Thermal resistance < 150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Vibration resistance (functional) 20g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 500g Mounting position any Weight max. 0.75g Resistance to soldering heat SMT IEC 60068-2-58 Moisture sensitive level, JEDEC J-Std-020D MSL3 related only to SMT relays packed in original dry-packs. Calculated shelf life in sealed bags: 36 months at<40° C and <90% relative humidity (RH). Floor life (out of the bag) at assembly site is 168 hours at ≤ 30º/60% RH. Ultrasonic cleaning Not recommended Packaging/unit THT version tube/50pcs., box/1000 pcs. SMT version reel/1000 pcs., box/1000 or 5000 pcs. Avoid using the relays under strong magnetic field which will change the parameters of relays such as operate/set voltage and release/reset voltage. OTHER DATA Isolation at 100MHz/900MHz 37.0dB/18.8dB Insertion loss at 100MHz/900MHz 0.03dB/0.33dB Voltage standing wave ratio (VSWR) @ 100MHz/900MHz 1.06/1.49 RF DATA TERMINAL ASSIGNMENT TOP view on relay IM-B, 1 form A (NO)

DIMENSIONS (Unit: mm) THT Standard version SMT Gull wings version PACKING Tube for THT version PROCESSING Recommended soldering conditions 240°C 180°C 130°C 100°C 20-40sec cooling Full line: typical Dottedline: pr ocesslimits for ced Time (s) T emperatur e °C Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Recommended Vapor Phase Soldering profile external preheating 50 relays per tube, 1000 relays per box Tape and reel for SMT version 1000 relays per reel, 1000 or 5000 relays per box Reel dimensions Note: Dimensions are in millimeters over (inches) unless otherwise specified. PCB LAYOUT TOP view on component side of PCB SMT - solder padsTHT mounting holes Note: Customer needs to apply enough solder paste volume / thickness / solder material content to support a stable solder joint

ORDERING INFORMATION

IM Signal Relays IM Series IMB Contact Arrangement B 1 form A, 1 NO Coil Coil code Please refer to coil versions table Performance type C High Dielectric Version I High Load Version Terminals T THT - standard G SMT-gull wing Packing S Tube R Reel

te.com ©2023 TE Connectivity. All Rights Reserved. Axicom, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. 02/23 ED INDUSTRY / SIGNAL RELAYS Note: This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. Product code Arrangement Perf. type Coil Coil type Terminals Part number IMB01CGR 1 form A, 1 NO contact High Dielectric 3VDC Monostable SMT gull wing 1462041-1 IMB01CTS THT standard 1462041-4 IMB02CGR 4.5VDC SMT gull wing 1462041-2 IMB02CTS THT standard 1462041-5 IMB03CGR 5VDC SMT gull wing 1462041-7 IMB03CTS THT standard 1462041-8 IMB04CGR 6VDC SMT gull wing 1462041-9 IMB06CGR 12VDC 1462041-3 IMB06CTS THT standard 1462041-6 IMB07CGR 24VDC SMT gull wing 1-1462041-3 IMB07CTS THT standard 1-1462041-4 IMB02IGR High Load 4.5VDC SMT gull wing 2-1462041-2 IMB02ITS THT Standard 2-1462041-3 IMB03IGR 5VDC SMT gull wing 2-1462041-4 IMB03ITS THT Standard 2-1462041-5 IMB06IGR 12VDC SMT gull wing 2-1462041-6 IMB06ITS THT Standard 2-1462041-7 PART NUMBER LIST SELECTION TABLE – STANDARD SERIES Notes: 1. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 2. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http:/ /relays.te.com/definitions. 3. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.