DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 1 of 7 Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages 0.6 pSec RMS phase jitter (random) over 12 kHz to 20 MHz bandwidth LVPECL and LVDS output signaling types Industry-standard package 3.2 x 2.5, and 5.0 x 3.2 mm x mm Pb-free, RoHS and REACH compliant Typical Applications: Fibre Channel Server and Storage GPON, EPON 100M / 1G /10G Ethernet Electronic Specifications: Frequency Range 1.000 MHz to 220.000 MHz Frequency Stability See Part Number Guide Inclusive of all changes in Operating Temp. Range, Load, and Voltage. First Year Aging ±2.0 ppm max +25°C ±2.0°C 10 Years Aging ±5.0 ppm max +25°C ±2.0°C Operating Temperature See Part Number Guide Supply Voltage (Vdd) ±10% See Part Number Guide Input Voltage High 70% of Vdd min Pin 1, OE or STതതത Input Voltage Low 30% of Vdd max Pin 1, OE or STതതത Input Pull-up Impedance 100 kΩ typ., 250 kΩ max
2.0 MΩ min
Pin 1, OE logic high or logic low, or STതതത logic high Pin 1, STതതത logic low Start-up Time 6.0 mSec typ., 10.0 mSec max Measured from t he time Vdd reaches its rated minimum values Resume Time 6.0 mSec typ., 10.0 mSec max Measured from the time STതതത pin crosses 50% threshold. Symmetry 45%/55% LVPECL, DC and AC Characteristics Current Consumption 61 mA typ., 69 mA max Excluding Load Termination Current, Vdd = +3.3 V or +2.5 V OE Disable Supply Currrent 35 mA max OE = Low Output Disable Leakage Current 1 µA max OE = Low Standby Current 100 µA max STതതത = Low, for all Vdds Maximum Output Current 30 mA max Max average current drawn from OUT+ or OUT- Logic “1” Vdd -1.1 min / Vdd – 0.7 max See figure 1(a) Logic “0” Vdd -1.9 min / Vdd – 1.5 max See figure 1(a) Output Differential Voltage Rise/Fall Time 300 pSec typ, 700 pSec max 20% to 80%, see figure 1(a) OE Enable/Disable Time 115 nSec max F = 212.50 MHz – For other frequencies, T_oe = 100nSec + 3 period RMS Period Jitter 1.2 pSec typ., 1.7 pSec max 1.2 pSec typ., 1.7 pSec max 1.2 pSec typ., 1.7 pSec max F = 100.00 MHz, Vdd = +3.3 V or +2.5 V F = 156.25 MHz, Vdd = +3.3 V or +2.5 V F = 212.25 MHz, Vdd = +3.3 V or +2.5 V RMS Phase Jitter (random) 0.60 pSec typ, 0.85 pSec max. F = 156.25 MHz, Integration Bandwidth = 12 kHz to 20 MHz all Vdds LVDS, DC and AC Characteristics Current Consumption 47 mA typ., 55 mA max Excluding Load Termination Current, Vdd = +3.3 V or +2.5 V OE Disable Supply Current 35 mA max OE = Low Differential Output Voltage 250mV min, 350mA typ. 450mV max See Figure 2 Output Disable Leakage Current 1 µA max OE = Low Standby Current 100 µA max STതതത = Low, for all Vdds VOD Magnitude Change 50 mV max See Figure 2 Offset Voltage 1.125 mV min, 1.200 mV typ., 1.375 mV max See Figure 2 VOS Magnitude Change 50 mV max See Figure 2 Rise/Fall Time 495 pSec typ. 700 pSec max 20% to 80%, See Figure 2 OE Enable Time/Disable Time 115 nSec max F = 212.25 MHz, For other Frequencies, T_oe=100nSec + 3 period RMS Period Jitter 1.2 pSec typ, 1.7 pSec max 1.2 pSec typ, 1.7 pSec max 1.2 pSec typ, 1.7 pSec max F = 100.00 MHz, Vdd = +3.3 V or +2.5 V F = 156.25 MHz, Vdd = +3.3 V or +2.5 V F = 212.25 MHz, Vdd = +3.3 V or +2.5 V RMS Phase Jitter (random) 0.60pSec typ., 0.85 pSec max F = 156.25 MHz, Integration Bandwidth = 12 kHz to 20 MHz all Vdds Notes: All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated. Typical values are at +25ºC and nominal supply voltage.
Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 2 of 7 Ordering Information: Part Number Guide Packages Input Voltage Operating Temperature Stability (ppm) Output Select Function Frequency IM840B – 5.0 x 3.2 IM840C – 3.2 x 2.5 1 = +1.8 V* 6 = +2.5 V 3 = +3.3 V (see Notes) 1 = 0ºC to +70ºC 2 = -40ºC to +85ºC 3 = -20ºC to +70ºC E = ±10 F = ±20 A = ±25 Z = ±30 B = ±50 8 = LVDS 9 = LVPECL H = Tri-state S = Standby - Frequency Notes: +1.8 V Supply Voltage (option 1) is for LVDS outputs only Sample Part Number: IM840C-62F9S-100.0000MHz waveform of LCPECL and Pin 1 functioning as Standby Sample Part Number: IM840B-13Z8H-150.0000MHz waveform of LVDS and Pin 1 functioning as Tri-state. Notes: Not all options are available at all frequencies and temperatures ranges. Please consult with sales department for any other parameters or options. Oscillator specification subj ect to change without notice. Absolute Maximum Limits Storage Temperature -65ºC to +150ºC Supply Voltage (Vdd) -0.5 VDC to 4.0 VDC Electrostatic Discharge 2000 V max Solder Temperature (follow standard Pb free soldering guidelines) 260ºC max Junction Temperature 150ºC max
Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 5 of 7 Environmental Specifications: Environmental Compliance Parameter Condition/Test Method Mechanical Shock MIL-STD-883F, Method 2002 Mechanical Vibration MIL-STD-883F, Method 2007 Temperature Cycle JESD22, Method A104 Solderability MIL-STD-883F, Method 2003 Moisture Sensitivity Level MSL Level 1 at +260ºC Pb Free Solder Reflow Profile Ts max to TL (Ramp-up Rate) 3ºC / second max Preheat Temperature min (Ts min) Temperature typ (Ts typ) Temperature max (Ts max) Time (Ts) 150ºC 175ºC 200ºC 60 to180 seconds Ramp-up Tate (TL to Tp 3ºC / second max Time Maintained Above Temperature (T Time (TL) 217ºC 60 to 150 seconds Peak Temperature (Tp) 260ºC max for seconds Time within 5ºC to Peak Temperature (Tp) 20 to 40 seconds Ramp-down Rate 6ºC / second max Tune 25ºC to Peak Temperature 8 minute max Moisture Sensitivity Level (MSL) Level 1 Units are backward compatible with +240ºC reflow processes
Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 6 of 7 Mechanical Details: Package Dimensions and Suggested Land Pattern Marking 5.00 ±0.05 3.20 ±0.05 1.20 2.54 0.64 0.90 0.80 max 2.54 2.20 0.90 1.20 Bottom View 54 6 23 1 Option B: 5.00 x 3.20 Package Suggested Land Pattern 1.00 3.20 ±0.05 2.50±0.05 0.90 2.20 0.60 0.70 0.80 max 2.25 1.60 1.05 Option C: 3.20 x 2.50 Package Suggested Land Pattern 0.65 Marking Marking Line 1 = XXXXX (Lot code) Dot to denote Pin 1 location
Package Information
Leadframe: C194 Plating: NiPdAu Pin Functionally: Pin Symbol Functionality Pin Assignments
1 OE Tri-state High or Open = specified frequency output
Low = Output is high impedance, only output is disabled. Top View GND Vdd OUT+ OE ST 2 5O U T -N/C STതതത Standby High or Open = specified frequency output. Low = Output is low (weak pull down). Device goes to sleep mode. Supply current reduces to standby current.
2 NC NA No Connection: Leave it floating or connected to GND for
3 GND Power Vdd – Power Supply Ground
4 Out+ Output Oscillator output
5 Out- Output Complementary Oscillator output
6 Vcc Power Power supply voltage
Notes: 1. In OE or STതതത mode, a pull-up resistor of 10.0 kΩ or less is recommended if Pin 1 is not externally driven. If Pin 1 needs to be left floating, use the NC option. 2. A capacitor of value 0.1 µF or higher betw een Pin 4 (Vcc) and Pin 1 (GND) is required.
Mems Oscillator, High Performance Differential Oscillator, LVPECL and LVDS 1.000 MHz to 220.000MHz IM840 Series ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ● www.ilsiamerica.com Specifications subject to change without notice Rev 02/15/16_A Page 7 of 7 Tape and Reel Dimensions DIRECTION OF FEED REF: EIA-481-E Q3 Q4 Q2Q1 WIDTH TAPE PITCH REEL DIA Part Number Size Pitch Tape Width Pin Orient. Reel Dia. Count Notes:\` All dimensions are in mm. Do not scale drawings. PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America.