IM47JR

IM00TS MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Rev. D EC-JM00-0009-03 ECOC: JM10 1. Apr. 04

2 pole telecom/signal relay, polarized Through Hole Types (THT), standard version with 5.08 mm, narrow version with 3.2 mm between the terminal rows or Surface Mount Type (SMT) Relay types: non-latching with 1 coil latching with 1 coil

Features

• Telecom/signal relay (dry circuit, test access, ringing) - Slim line10 x 6 mm, 0.39 x 0.24 inch - Low profile 5.65 mm, 0.222 inch - Minimum board-space 60 mm2 - Switching current 2 A - 2 changeover contacts (2 form C / DPDT) - Bifurcated contacts, gold plated - High sensitivity results in low nominal power consumption 140 mW for non latching standard 100 mW for latching version and non latching high sensitive version - High surge capability (1.2/50 µs and 10/700 µs) meets Bellcore GR 1089, FCC Part 68 and ITU-T K20, 21, 45 ³1500 V between open contacts ³ 2500 V between coil and contacts - High mechanical shock resistance up to 300 G functional up to 500 G survival Typical applications: - Communications equipment Linecard application – analog, ISDN, xDSL, PABX Voice over IP - Office and business equipment - Measurement and control equipment - Consumer electronics Set top boxes, HiFi - Medical equipment Options: Surge capability ³ 2500 V between open contacts IM Relay Insulation category: Supplementary insulation according IEC/EN 60950 Working voltage £ 300 Vrms Mains supply voltage SMT: 250 Vrms THT: 200 Vrms Repetitive peak voltage 2500 V Pollution degree: External: 2 Internal: 1 Flammability classification: V-0 Maximum operating temperature: 85°C UL 508 File No. E111441 UL 60950 IEC/EN60950 IEC Ref. Cert. No. 2170 CECC 61811-51:01 (QC 160501) Page 2 (11) 108-98001 Rev. D European Directive conformance: IM relay product conformance according to: - Directive 2000/53/EC: ELV (End of Life of Vehicles) - Directive 2002/95/EC: ROHS (Restrictions of the use of certain hazardous substances in electrical and electronic equipment) Compliance is evidenced by written declaration from all raw material suppliers. Tyco Electronics AXICOM only has responsibility for the proper processing of these materials. Confirmation is valid for date codes ≥ 0438

View onto the component side of the PCB (top view) Terminal assignment Relay - top view Non-latching type, not energized condition Dimensions IM THT IM THT IM SMT IM SMT Standard Narrow Gull Wings J-Legs mm inch mm inch mm inch T 3.2 0.125 3.2 0.125 N/A N/A N/A N/A SMT Version Gull Wings J Legs Solder pad layout View onto the component side of the PCB (top view) Gull Wings J Legs Ø min. 0.75 Latching type, 1 coil reset condition Standard version Narrow version Standard version Narrow version Page 3 (11) 108-98001 Rev. D Relay Code

1.5 1.13 3.6 0.15 140 16 IM00TS 3-1462037-5 3 2.25 7.2 0.30 140 64 IM01TS 0-1462037-4 4.5 3.38 10.8 0.45 140 145 IM02TS 1-1462037-3 5 3.75 12.1 0.50 140 178 IM03TS 1-1462037-8 6 4.50 14.5 0.60 140 257 IM04TS 4-1462037-1 9 6.75 21.7 0.90 140 574 IM05TS 2-1462037-2 12 9.00 28.9 1.20 140 1028 IM06TS 2-1462037-7 24 18.00 48.5 2.40 200 2880 IM07TS 3-1462037-0 Further coil versions are available on request. IM Relay Page 4 (11) 108-98001 Rev. D Coil Data (values at 23°C) Nominal Operate/set voltage range Release/ Coil Coil Relay Tyco part voltage reset voltage power Resistance code number Unom Minimum Minimum Maximum voltage Umin voltage Umax Vdc Vdc Vdc Vdc mW Ω / ± 10 %

Ordering Information

THT Standard non-latching 1 coil 1.5 1.13 3.6 0.15 140 16 IM00NS 1-1462038-0 3 2.25 7.2 0.30 140 64 IM01NS 1-1462038-1 4.5 3.38 10.8 0.45 140 145 IM02NS 1-1462038-2 5 3.75 12.1 0.50 140 178 IM03NS 1-1462038-3 6 4.50 14.5 0.60 140 257 IM04NS 1-1462038-4 9 6.75 21.7 0.90 140 574 IM05NS 1-1462038-5 12 9.00 28.9 1.20 140 1028 IM06NS 1-1462038-6 24 18.00 48.5 2.40 200 2880 IM07NS 1-1462038-7 THT Narrow non-latching 1 coil 1.5 1.13 3.6 0.15 140 16 IM00JR 3-1462037-9 3 2.25 7.2 0.30 140 64 IM01JR 4-1462037-0 4.5 3.38 10.8 0.45 140 145 IM02JR 1-1462037-1 5 3.75 12.1 0.50 140 178 IM03JR 1-1462037-6 6 4.50 14.5 0.60 140 257 IM04JR 4-1462037-4 9 6.75 21.7 0.90 140 574 IM05JR 4-1462037-5 12 9.00 28.9 1.20 140 1028 IM06JR 4-1462037-6 24 18.00 48.5 2.40 200 2880 IM07JR 4-1462037-8 SMT J-Legs non-latching 1 coil 1.5 1.13 3.6 0.15 140 16 IM00GR 3-1462037-7 3 2.25 7.2 0.30 140 64 IM01GR 0-1462037-1 4.5 3.38 10.8 0.45 140 145 IM02GR 0-1462037-9 5 3.75 12.1 0.50 140 178 IM03GR 1-1462037-4 6 4.50 14.5 0.60 140 257 IM04GR 4-1462037-2 9 6.75 21.7 0.90 140 574 IM05GR 3-1462037-4 12 9.00 28.9 1.20 140 1028 IM06GR 2-1462037-3 24 18.00 48.5 2.40 200 2880 IM07GR 4-1462037-7 SMT Gull Wings non-latching 1 coil 3 2.25 7.2 0.30 140 64 IM01CGR 0-1462038-4 4.5 3.38 10.8 0.45 140 145 IM02CGR 0-1462038-1 5 3.75 12.1 0.50 140 178 IM03CGR 0-1462038-2 9 6.75 21.7 0.90 140 574 IM05CGR 0-1462038-3 12 9.00 28.9 1.20 140 1028 IM06CGR 9-1462037-9 24 18.00 48.5 2.40 200 2880 IM07CGR 0-1462039-2 SMT Gull Wings non-latching 1 coil High Dielectric Version 4.5 3.38 10.8 0.45 140 145 IM02DGR 9-1462038-8 5 3.75 12.1 0.50 140 178 IM03DGR 9-1462038-9 SMT Gull Wings non-latching 1 coil High Current Version

Page 5 (11) 108-98001 Rev. D Coil Data (values at 23°C) Nominal Operate/set voltage range Release/ Coil Coil Relay Tyco part voltage reset voltage power Resistance code number Unom Minimum Minimum Maximum voltage Umin voltage Umax Vdc Vdc Vdc Vdc mW Ω / ± 10 % 1.5 1.13 4.3 -1.13 100 23 IM40TS 5-1462037-0 3 2.25 8.6 -2.25 100 90 IM41TS 5-1462037-3 4.5 3.38 12.9 -3.38 100 203 IM42TS 5-1462037-6 5 3.75 14.3 -3.75 100 250 IM43TS 5-1462037-8 6 4.50 17.1 -4.50 100 380 IM44TS 6-1462037-1 9 6.75 25.7 -6.75 100 810 IM45TS 3-1462037-2 12 9.00 34.3 -9.00 100 1440 IM46TS 6-1462037-6 24 18.00 48.5 -18.00 200 2880 IM47TS 6-1462037-9 THT Standard latching 1 coil 1.5 1.13 4.3 -1.13 100 23 IM40NS 1-1462038-8 3 2.25 8.6 -2.25 100 90 IM41NS 1-1462038-9 4.5 3.38 12.9 -3.38 100 203 IM42NS 2-1462038-0 5 3.75 14.3 -3.75 100 250 IM43NS 2-1462038-1 6 4.50 17.1 -4.50 100 380 IM44NS 2-1462038-2 9 6.75 25.7 -6.75 100 810 IM45NS 2-1462038-3 12 9.00 34.3 -9.00 100 1440 IM46NS 2-1462038-4 24 18.00 48.5 -18.00 200 2880 IM47NS 2-1462038-5 THT Narrow latching 1 coil 1.5 1.13 4.3 -1.13 100 23 IM40JR 5-1462037-2 3 2.25 8.6 -2.25 100 90 IM41JR 5-1462037-5 4.5 3.38 12.9 -3.38 100 203 IM42JR 5-1462037-7 5 3.75 14.3 -3.75 100 250 IM43JR 6-1462037-0 6 4.50 17.1 -4.50 100 380 IM44JR 6-1462037-3 9 6.75 25.7 -6.75 100 810 IM45JR 6-1462037-5 12 9.00 34.3 -9.00 100 1440 IM46JR 6-1462037-8 24 18.00 48.5 -18.00 200 2880 IM47JR 7-1462037-1 SMT J-Legs latching 1 coil 1.5 1.13 4.3 -1.13 100 23 IM40GR 5-1462037-1 3 2.25 8.6 -2.25 100 90 IM41GR 5-1462037-4 4.5 3.38 12.9 -3.38 100 203 IM42GR 3-1462037-1 5 3.75 14.3 -3.75 100 250 IM43GR 5-1462037-9 6 4.50 17.1 -4.50 100 380 IM44GR 6-1462037-2 9 6.75 25.7 -6.75 100 810 IM45GR 6-1462037-4 12 9.00 34.3 -9.00 100 1440 IM46GR 6-1462037-7 24 18.00 48.5 -18.00 200 2880 IM47GR 7-1462037-0 SMT Gull Wings latching 1 coil 3 2.40 8.7 0.30 100 91 IM11GR 9-1462038-5 4.5 3.60 13.1 0.45 100 194 IM12GR 0-1462039-3 5 4.00 14.6 0.50 100 238 IM13GR 0-1462039-4 12 9.60 35.0 1.20 110 1315 IM16GR 0-1462039-5 24 19.20 57.8 2.40 140 4120 IM17GR 0-1462039-6 SMT Gull Wings non-latching 1 coil High Sensitive Version IM Relay 5 3.75 14.3 -3.75 100 250 IM43CGR 9-1462038-7 SMT Gull Wings latching 1 coil High Dielectric Version

0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Coil operating range Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Unom. nominal coil voltage Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 1 A Uop. min. Urel. min. Ambient Temperature [°C] Coil Voltage [U/Unom] 110 mW 140 mW Unom. nominal coil voltage IM Relay Umax. at 0 A 200 mW 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Uset min. Ambient Temperature [°C] Coil Voltage [U/Unom] 200 mW Latching Unom. nominal coil voltage Umax. - 5 % coil duty at 0 A (200 mW) Umax. - 5 % coil duty at 0 A (100 mW) Umax. - 100 % coil duty at 0 A (100 mW) Umax. - 100 % coil duty at 0 A (200 mW) 100 mW Latching Umax. - 5 % coil duty at 2 x 2 A (100 mW) Umax. - 5 % coil duty at 2 x 1 A (100 mW) DC Voltage [Vdc] DC current [A] Page 6 (12) 108-98001 Rev. D Max. DC load breaking capacity Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage)

Number of contacts and type Contact assembly Contact material Limiting continuous current at max. ambient temperature Maximum switching current Maximum swichting voltage Maximum switching capacity Thermoelectric potential Minimum switching voltage Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance at contact application 0 cable load open end Resistive load at 125Vdc / 0.24 A - 30 W at 220 Vdc / 0.27 A - 60 W at 250 Vac / 0.25 A - 62.5 VA at 30 Vdc / 1 A - 30 W at 30 Vdc / 2 A - 60 W Mechanical endurance UL contact ratings 2 changeover contacts Bifurcated contacts Palladium-ruthenium, gold-covered 2 A 2 A

220 Vdc

250 Vac

60 W, 62.5 VA < 10 mV 100 mV < 50 mW min. 2.5 x 106 operations min. 2.0 x 106 operations min. 5 x 105 operations min. 1 x 105 operations min. 1 x 105 operations min. 5 x 105 operations min. 1 x 105 operations typ. 108 operations 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA

30 Vdc / 2 A - 60 W

between adjacent contact sets between open contacts RF Characteristics Isolation at 100 / 900 MHz Insertion loss at 100 / 900 MHz V.S.W.R. at 100 / 900 MHz max. 2 pF max. 2 pF max. 1 pF - 37.0 dB / - 18.8 dB - 0.03 dB / - 0.33 dB 1.06 / 1.49 High Frequency Data * High Dielectric Version „C“ Insulation Insulation resistance at 500 VDC Dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts Surge voltage resistance according to Bellcore TR-NWT-001089 (2 / 10 ms) between coil and contacts between adjacent contact sets between open contacts according to FCC 68 (10 / 160 ms) between coil and contacts between adjacent contact sets between open contacts > 109 W > 109 W

1800 Vrms 1800 Vrms

1000 Vrms 1800 Vrms

1000 Vrms 1500 Vrms

2500 V 2500 V

1500 V 2500 V

Standard Version High Dielectric Version Page 7 (12) 108-98001 Rev. D

Operate time at Unom typ. / max. Reset time (latching) at Unom , typ. / max. Release time without diode in parallel (non-latching), typ. / max. Release time with diode in parallel (non-latching), typ. / max. Bounce time at closing contact, typ. / max. Maximum switching rate without load Ambient temperature Thermal resistance Maximum permissible coil temperature Vibration resistance (function) Shock resistance, half sinus, 11 ms half sinus, 0.5 ms Degree of protection / Environmental protection Needle flame test Mounting position Processing information Weight (mass) Terminal surface Moisture sensitive level (JEDEC J-STD-020B) Resistance to soldering heat 1 ms / 3 ms 1 ms /3 ms 1 ms / 3 ms 3 ms / 5 ms 1 ms / 5 ms 50 operations/s -40° C ... +85° C < 150 K/W 125° C 20 G 10 to 1000 Hz

50 G (function)

500 G (damage)

immersion cleanable, IP 67 / RT V application time 20 s, no burning and glowing any Ultrasonic cleaning is not recommended max. 0.75 g NiPdAu MSL 3 260° C / 10 s IM Relay All data refers to 23° C unless otherwise specified. Page 8 (11) 108-98001 Rev. D Recommended soldering conditions Soldering conditions according IEC 60058-2-58 and IPC/JEDEC J-STD-020B Vapor Phase Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) 240° C 180° C 130° C 100° C 20 - 40 sec Full line: typical Dotted line: process limits forced cooling Time (s) Temperature °C Temperature °C Time (s) Resistance to soldering heat - Reflow profile Recommended reflow soldering profile Infrared Soldering: Temperature/Time Profile (Lead and Housing Peak Temperature) Temperature °C Time (s)

Tube for THT version - 50 relays per tube, 1000 relays per box Tape and reel for SMT version - 1’000 relays / reel, 1’000 or 5’000 relays / box Packing Dimensions in mm Page 9 (11) 108-98001 Rev. D

4th generation slim line – low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height. P2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 15 x 7,5 mm board space and 10 mm height. FX Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/ IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. FT2 / FU2 Relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power through hole and surface mount type. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. FP2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height. MT2 / MT4 2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and

48 V, coil power consumption 150/200/300/400 and

550 mW, and 300 mW (MT4). Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) the MT4 only. Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height, MT4 approx. 20 x15 mm board space and 11 mm height. D2n Relays 2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 20 x10 mm board space and 11,5 mm height. P1 Relays Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version. W11 Relays Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. Reed Relays High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. Cradle Relays Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. Other Relays We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 / V23031 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. HF3 Relay High performance low cost RF relay with excellent RF characteristics. Available with an impedance of 50 and 75 Ohm. Suitable for frequen- cies up to 3 GHz. Actually smallest RF relay available combining small size, excellent RF performance and SMD solderability. Available as non latching or latching relay with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm. Page 10 (11) 108-98001 Rev. D

Tyco Electronics AXICOM Ltd. Seestrasse 295 - P.O. Box 220 CH-8804 Au-Wädenswil / Switzerland Phone +41 1 782 9111 Fax +41 1 782 9080 E-mail: axicom@tycoelectronics.com Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752 Tyco Electronics EC Trutnov s.r.o. Komenského 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com Page 11 (11) 108-98001 Rev. D