IM03DJR

IM40SR TEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 11

Technical content

TE Connectivity (TE)’s Axicom IM signal relays, as part of our smallest types of electromechanical relays, offer a wide and deep range of variations suitable for many applications. The IM series are equipped with 2 changeover contacts in both monostable or bistable versions, available in multiple coil solutions, performance types and pin layouts.

FEATURES

• Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm².
• Switching current 2/5A, switching power 60W/62.5VA and switching voltage 220VDC/250VAC.
• Low coil power consumption, 140mW standard, 100mW for high sensitive version, 50mW for ultra high sensitive version and 100mW for bistable version.
• High dielectric and surge capability up to 2500Vrms between open contacts and 2500Vrms between coil and contacts.
• High mechanical shock resistance up to 50g functional.

APPLICATIONS

• Telecommunication
• Access and transmission equipment
• Optical network terminals
• Modems
• Office and business equipment
• Consumer electronics
• Measurement and test equipment
• Industrial control
• Medical equipment
• HVAC APPROVALS
• UL 61810-1 (former UL 508) File No. E214025 Buyer entirely assumes the risk and all liability relating to (a) assessing the suitability for Buyer’s intended use of the Products and of any system design or drawing and (b) determining the compliance of Buyer’s use of the Products with applicable laws, regulations, codes and standards. For more info on the exclusive and applicable warranty, please refer to TE standard warranty terms. Technical data of approved types on request U

MAX. DC LOAD BREAKING CAPACITY Performance type Standard, C (Standard and high dielectric version) D, I (High current version) P (High contact stability version) Contact arrangement 2 form C, 2 CO Max. switching voltage 220VDC, 250VAC 220VDC, 250VAC 220VDC, 250VAC Rated current 2A 5A1) 2A Limiting continuous current 2A 5A1) 2A Switching power 60W, 62.5VA Contact material PdRu +Au covered AgNi +Au covered PdRu +Au covered Contact style Twin contacts Twin contacts I: single contacts Twin contacts Minimum switching voltage 100μV Initial contact resistance <50mΩ at 10mA/30mV I: < 100mΩ Thermoelectric potential <10μV Operate time typ. 1ms, max. 3ms Release time Without diode in parallel typ. 1ms, max. 3ms With diode in parallel typ. 3ms, max. 5ms Bounce time max. typ. 1ms, max. 5ms Electrical endurance at contact application 0 (≤30mV/≤10mA) min. 2.5x106 operations Cable load open end min. 2.0x106 operations Resistive, 125VDC / 0.24A - 30W min. 5x105 operations Resistive, 220 VDC / 0.27A - 60W min. 1x105 operations Resistive, 250VAC / 0.25A - 62.5VA min. 1x105 operations Resistive, 30VDC / 1A - 30W min. 5x105 operations Resistive, 30VDC / 2A - 60W min. 1x105 operations 108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 21 of 28 AXICOMÊSignalÊRelays IM Relay Contact Data IM-A IM-B IM-C IM-D IM-E Number of contacts and type 1ÊPoleÊbr eak 1ÊPoleÊmake 1ÊPole ÊÊ changeover 2ÊPoleÊbr eak 2ÊPoleÊmak e Contact assembly Bifur catedÊcontacts Contact material Palladium-ruthenium,Êgold-cover ed Limiting continuous current at max. ambient temperature 2ÊA2 ÊA 4Ê A2 ÊA 2Ê A Maximum switching current 2ÊA 2ÊA 3ÊA 2ÊA 2Ê A Maximum swichting voltage 220ÊVdc 250ÊV ac Maximum switching capacity 60ÊW ,Ê62.5Ê VA Thermoelectric potential <Ê10ʵ V Minimum switching voltage 100ʵ V Initial contact resistance / measuring condition: 10 mA / 20 mV < 100 m/uni03A9 < 100 m/uni03A9 NO < 100 m/uni03A9 < 50 m/uni03A9 < 50 m/uni03A9 endurance (≤ 30 mV / ≥ 10 mA) cable load open end Resistive load at 125 Vdc / 0.24 A - 30 W at 220 Vdc / 0.27 A - 60 W at 250 V ac / 0.25 A - 62.5 VA at 30 Vdc / 1 A - 30 W at 30 Vdc / 2 A - 60 W min.Ê2.5ÊxÊ1 0 6 Êoperations min.Ê2.0ÊxÊ1 0 6 Êoperations min.Ê5ÊxÊ10 5 Êoperations min.Ê1ÊxÊ1 0 5 Êoperations min.Ê1ÊxÊ1 0 5 Êoperations min.Ê5ÊxÊ1 0 5 Êoperations min.Ê1ÊxÊ1 0 5 Êoperations Mechanical endurance typ.Ê10 8 Êoperations UL contact ratings 220 Vdc / 0.24 A - 60 W 125 Vdc / 0.24 A - 30 W 250 Vac / 0.25 A - 62.5 VA 125 Vac / 0.5 A - 62.5 VA

30 Vdc / 2 A - 60 W

Max. DC Load Breaking Capacity DC V oltage [Vdc] DC current [A] r esistive load Performance type Standard, C (Standard and high dielectric version) D, I (High current version) P (High contact stability version) UL contact rating 30VDC, 2A, 60W, NO only 110VDC, 0.3A, 33W 220VDC, 0.27A, 60W 125VAC, 0.5A, 62.5VA 250VAC, 0.25A, 62.5VA 30VAC, 2A, 62.5VA, NO only (IMxxI, IMxxD) Mechanical endurance min. 1x108 operations INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS 1) for 5A applications please contact TE

0,2 0,4 0,6 0,8 1,2 1,4 1,6 1,8 2,2 2,4 2,6 2,8 3,2 3,4 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Coil Voltage [U/Unom] Ambient Temperature [ºC] Coil operating range Unom. nominal coil voltage Uop. min. Urel. min. 140 mW coil 200 mW coil Umax. 2x2A Umax. at 0A Umax. at 2x1A Umax. at 0A Umax. at 2x1A Umax. at 2x2A COIL OPERATING RANGE, STANDARD VERSION, MONOSTABLE, 1 COIL COIL DATA Magnetic system Monostable, bistable Coil voltage range 1.5 to 24VDC Coil code Rated voltage VDC Operate voltage VDC Release voltage VDC Coil resistance Ω±10% Rated coil power mW Coil versions, standard version, monostable, 1 coil 00 1.5 1.13 0.15 16 140 08 2.4 1.80 0.24 41 140 01 3 2.25 0.30 64 140 02 4.5 3.38 0.45 145 140 03 5 3.75 0.50 178 140 04 6 4.50 0.60 257 140 05 9 6.75 0.90 579 140 06 12 9.00 1.20 1029 140 07 24 18.00 2.40 2880 200 Coil versions, sensitive version, monostable, 1 coil 11 3 2.40 0.30 91 100 12 4.5 3.60 0.45 194 100 13 5 4.00 0.50 234 100 16 12 9.60 1.20 1315 110 17 24 19.20 2.40 4120 140 Coil versions, ultra high sensitive version, monostable, 1 coil 21 3 3.00 0.30 180 50 22 4.5 4.50 0.45 405 50 23 5 5.00 0.50 500 50 26 12 12.00 1.20 2880 50 All figures are given for coil without pre-energization, at ambient temperature +23°C Coil code Rated voltage VDC Set voltage VDC Reset voltage VDC Coil resistance Ω±10% Rated coil power mW Coil versions, standard version, bistable 1 coil 40 1.5 1.13 -1.13 16 100 48 2.4 1.80 -1.80 41 100 41 3 2.25 -2.25 64 100 42 4.5 3.38 -3.38 145 100 43 5 3.75 -3.75 178 100 44 6 4.50 -4.50 257 100 45 9 6.75 -6.75 579 100 46 12 9.00 -9.00 1029 100 47 24 18.00 18.00 2880 200 COIL OPERATING RANGE, SENSITIVE AND ULTRA HIGH SENSITIVE VERSION, MONOSTABLE, 1 COIL 108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 24 of 28 AXICOMÊSignalÊRelays IM Relay Coil Operating Range Unom = Nominal coil voltage Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (r eliable operate voltage) For latching relays Uset min. resp. Ureset min. Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -50- 40 -30- 20 -100 10 20 30 40 50 60 70 80 90 10 01 10 12 0 Coil Voltage [U/Unom] Umax. at 0A Umax. at 2x2A Umax. at 2x1A Unom. nominal coil voltage Ambient Temperature [°C] 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -50 -40 -30 -20 -10 01 02 03 04 05 06 07 08 09 0 100 110 120 Ambient Temperature [°C] Coil Voltage [U/Unom] Umax. at 0A Umax. at 2x2A Umax. at 2x1A Unom. nominal coil voltage Urel. min. 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 3.4 -50- 40 -30- 20 -100 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [°C] Coil Voltage [U/Unom] Umax. - 5%coil duty at 2x2A (100mW) Umax.-5%coil duty at 0A(100mW) Umax.-5%coil duty at 0A (200mW) Umax. -5% coil duty at 2x1A (100mW) Unom. nominal coil voltage Umax. at 0A 140mW coil 200mW coil Urel. min. 50mW coil 100mW coil Uop min. Umax. at 0A Umax. - 100% coil duty at 0A (100mW) Umax. - 100% coil duty at 0A (200mW) Uset min. 100 mW Latching 200 mW Latching COIL OPERATING RANGE, STANDARD VERSION, BISTABLE, 1 COIL INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

(Standard, sensitive, ultra high sensitive version) C2) (High dielectric version) D, P, I (High current, high contact stability version) Initial dielectric strength between open contacts 750Vrms 1500Vrms 750Vrms between contact and coil 1800Vrms 1800Vrms 1500Vrms between adjacent contacts 1000Vrms 1800Vrms 750Vrms Initial surge withstand voltage between open contacts 1500V 2500V 1000V between contact and coil 2500V 2500V 2000V between adjacent contacts 1500V 2500V 1000V Initial insulation resistance between insulated elements >10⁹Ω >10⁹Ω >10⁹Ω Capacitance between open contacts max. 1pF between contact and coil max. 2pF between adjacent contacts max. 2pF 2) this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks to air during normal application as recommended per the applicable product specification. It is cla- rified that the usage of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration. To ensure the dielectric performance after soldering processes / assembly customer is advised to perform a dielectric test. RF DATA Isolation at 100MHz/900MHz 37.0dB/18.8dB Insertion loss at 100MHz/900MHz 0.03dB/0.33dB Voltage standing wave ratio (VSWR) at 100MHz/900MHz 1.06/1.49 OTHER DATA Material compliance EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www. te.com/customersupport/ rohssupportcenter Ambient temperature -40°C to +85°C Thermal resistance <150K/W Category of environmental protection IEC 61810 RT V - hermetically sealed Vibration resistance (functional) 20g, 10 to 500Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 500g Mounting position various Weight max. 0.75g Resistance to soldering heat SMT IEC 60068-2-58 Moisture sensitive level, JEDEC J-STD-020F MSL3 related only to SMT relays packed in orginal dry-packs. Calculated shelf life in sealed bag: 36 months at <400C and <90% relative humidity (RH). Floor life (out of the bag) at assembly site is 168 Hours at ≤ 300C/60% RH. Ultrasonic cleaning not recommended Packaging/unit THT version tube/50pcs., box/1000 pcs. SMT version reel/1000 pcs., box/1000 or 5000 pcs. Avoid using the relays under strong magnetic fields, as electrical parameters will be affected, such as operate/set voltage and release/reset voltage. MONOSTABLE VERSION REST CONDITION 108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28 AXICOMÊSignalÊRelays IM Relay 2 Pole Changeover / 2 Form C / DPDT Dimensions Dimensions in mm THT Version Mounting Hole Layout View onto the component side of the PCB (top view) Non-Latching Type not energized condition Latching Type, 1 Coil reset condition IMÊTHT Standard IMÊTHT Narrow IMÊSMT GullÊWings IMÊSMT J-Legs mm inch mm inch mm inch mm inch L W H 10.00ʱÊ0.08 6.00ʱÊ0.08 5.65ÊÐÊ0.20 0.393ʱÊ0.003 0.236ʱÊ0.003 0.222ÊÐÊ0.008 10.00ʱÊ0.08 5.70ʱÊ0.30 5.80ʱÊ0.08 0.393ʱÊ0.003 0.224ʱÊ0.012 0.230ʱÊ0.003 10.00ʱÊ0.08 ÊÊ6.00ʱÊ0.08 ÊÊ5.65ÊÐÊ0.20 0.393ʱÊ0.003 0.236ʱÊ0.003 0.222ÊÐÊ0.008 10.00ʱÊ0.08 ÊÊ6.00ʱÊ0.08 ÊÊ5.65ÊÐÊ0.02 0.393ʱÊ0.003 0.236ʱÊ0.003 0.222ÊÐÊ0.008 SMT Version Standard Version Narrow Version Solder Pad Layout View onto the component side of the PCB (top view) Gull Wings J-Legs Standard Version Narrow Version Gull Wings ¯Êmin.Ê0.75 ¯Êmin.Ê0.75 Terminal Assignment Relay – top view ContactsÊ inÊr esetÊ position.Ê ContactÊ positionÊ mightÊ changeÊ duringÊ trans- portationÊ andÊ mustÊ beÊr esetÊ beforeÊ use. Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm T Tw S 3.2 N/A 5.08ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.40 0.75 0.125 N/A 0.200ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 0.029 3.2 N/A 3.20ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.4 0.30ʱÊ0.05 0.125 N/A 0.126ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 0.011ʱÊ0.002 N/A 7.50ʱÊ0.30 5.08ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.4 N/A N/A 0.295ʱÊ0.011 0.200ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 N/A N/A 2.80ʱÊ0.20 5.08ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.4 N/A N/A 0.110ʱÊ0.007 0.200ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 N/A 10.0±0.08 6.0±0.08 5.08±0.1 0.4 3.2±0.15 2.2±0.15 2.2±0.15 3.2 5.65-0.2 0.75 10.0±0.08 5.7±0.3 3.2±0.1 0.4 3.2±0.15 2.2±0.15 2.2±0.15 3.2 5.8±0.08 0.3±0.05 10.0±0.08 6.0±0.08 5.08±0.10.4 3.2±0.15 2.2±0.15 2.2±0.15 5.65-0.2 10.0±0.08 6.0±0.08 5.08±0.1 0.4 3.2±0.15 2.2±0.15 2.2±0.15 5.65-0.2 7.5±0.3 Coplanarity ≤0.1mm 2.8±0.2 Coplanarity ≤0.1mm BISTABLE VERSION, 1 COIL RESET CONDITION 108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 28 AXICOMÊSignalÊRelays IM Relay 2 Pole Changeover / 2 Form C / DPDT Dimensions Dimensions in mm THT Version Mounting Hole Layout View onto the component side of the PCB (top view) Non-Latching Type not energized condition Latching Type, 1 Coil reset condition IMÊTHT Standard IMÊTHT Narrow IMÊSMT GullÊWings IMÊSMT J-Legs mm inch mm inch mm inch mm inch L W H 10.00ʱÊ0.08 6.00ʱÊ0.08 5.65ÊÐÊ0.20 0.393ʱÊ0.003 0.236ʱÊ0.003 0.222ÊÐÊ0.008 10.00ʱÊ0.08 5.70ʱÊ0.30 5.80ʱÊ0.08 0.393ʱÊ0.003 0.224ʱÊ0.012 0.230ʱÊ0.003 10.00ʱÊ0.08 ÊÊ6.00ʱÊ0.08 ÊÊ5.65ÊÐÊ0.20 0.393ʱÊ0.003 0.236ʱÊ0.003 0.222ÊÐÊ0.008 10.00ʱÊ0.08 ÊÊ6.00ʱÊ0.08 ÊÊ5.65ÊÐÊ0.02 0.393ʱÊ0.003 0.236ʱÊ0.003 0.222ÊÐÊ0.008 SMT Version Standard Version Narrow Version Solder Pad Layout View onto the component side of the PCB (top view) Gull Wings J-Legs Standard Version Narrow Version Gull Wings ¯Êmin.Ê0.75 ¯Êmin.Ê0.75 Terminal Assignment Relay – top view ContactsÊ inÊr esetÊ position.Ê ContactÊ positionÊ mightÊ changeÊ duringÊ trans- portationÊ andÊ mustÊ beÊr esetÊ beforeÊ use. Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm T Tw S 3.2 N/A 5.08ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.40 0.75 0.125 N/A 0.200ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 0.029 3.2 N/A 3.20ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.4 0.30ʱÊ0.05 0.125 N/A 0.126ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 0.011ʱÊ0.002 N/A 7.50ʱÊ0.30 5.08ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.4 N/A N/A 0.295ʱÊ0.011 0.200ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 N/A N/A 2.80ʱÊ0.20 5.08ʱÊ0.10 3.20ʱÊ0.15 2.20ʱÊ0.15 0.4 N/A N/A 0.110ʱÊ0.007 0.200ʱÊ0.004 0.126ʱÊ0.006 0.087ʱÊ0.006 0.015 N/A 10.0±0.08 6.0±0.08 5.08±0.1 0.4 3.2±0.15 2.2±0.15 2.2±0.15 3.2 5.65-0.2 0.75 10.0±0.08 5.7±0.3 3.2±0.1 0.4 3.2±0.15 2.2±0.15 2.2±0.15 3.2 5.8±0.08 0.3±0.05 10.0±0.08 6.0±0.08 5.08±0.10.4 3.2±0.15 2.2±0.15 2.2±0.15 5.65-0.2 10.0±0.08 6.0±0.08 5.08±0.1 0.4 3.2±0.15 2.2±0.15 2.2±0.15 5.65-0.2 7.5±0.3 Coplanarity ≤0.1mm 2.8±0.2 Coplanarity ≤0.1mm Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

THT Standard version THT Narrow versionTHT Short version Note: Customer needs to apply enough solder paste volume / thickness / solder material content to ensure a stable solder joint PCB LAYOUT Top view on component side of PCB DIMENSIONS (UNIT: mm ) SMT J-legs versionSMT Short Gull wings versionSMT Gull wings version Coplanarity ≤0.1 Coplanarity ≤0.1 Coplanarity ≤0.1 THT Standard and Short version THT Narrow version SMT Gull wings version SMT Short Gull wings version SMT J-legs version INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box 50 relays per tube, 1000 relays per box 108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box 1000 relays per reel, 1000 or 5000 relays per box Reel dimensions 108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box 108-98001 Rev. M All specifications subject to change. Consult Tyco Electronics for latest specifications. 26 of 28 AXICOMÊSignalÊRelays IM Relay Packing Dimensions in mm Reel Dimension Tube for THT version 50 relays per tube 1,000 relays per box Tape and reel for SMT version 1,000 relays per reel 1,000 or 5,000 relays per box Tube for THT version Tape and reel for SMT version Recommended soldering conditions PROCESSING Recommended reflow soldering profile IEC 61760-1 full line: typical dotted line: process limits external preheating 240°C 180°C 130°C 100°C forced cooling 20 to 40s Time [s] Temperature [°C] Vapour phase soldering temperature/time profile (lead and housing peak temp.) Recommended soldering conditions Vapour phase soldering Recommended vapor phase soldering profile Copyright © 2015 IEC Geneva, Switzerland. Note: The author thanks the International Electrotechnical Commission (IEC) for permission to reproduce Information from its International Standards. All such extracts are copyright extracts and contents are reproduced by the author, nor is IEC in any way responsible for the other content or accuracy therein.” INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

IM _ 03 _ G R Type IM Signal Relays IM series Contact arrangement Blank 2 form C, 2 CO Coil Coil code Coil code: please refer to coil versions table Performance type Blank Standard version R Customer specific I High current version single contact C High dielectric version D High current version P High contact stability version Packing S Tube R Reel Terminals T THT - standard N THT - narrow version K THT - short version J SMT - J-leg G SMT - gull wing S SMT - short gull wing PRODUCT CODE STRUCTURE Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number IM00GR 2 form C, 2 CO contacts Standard 1.5VDC Monostable Standard SMT gull wing 3-1462037-7 IM00JR SMT J-leg 3-1462037-9 IM00NS THT narrow 1-1462038-0 IM01GR 3VDC SMT gull wing 1462037-1 IM01SR SMT short gull wing 2-1462040-3 IM01JR SMT J-leg 4-1462037-0 IM01NS THT narrow 1-1462038-1 IM01TS THT standard 1462037-4 IM02GR 4.5VDC SMT gull wing 1462037-9 IM02SR SMT short gull wing 2-1462040-4 IM02JR SMT J-leg 1-1462037-1 IM02NS THT narrow 1-1462038-2 PRODUCT SELECTION INFORMATION INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number IM03GR 2 form C, 2 CO contacts Standard 5VDC Monostable Standard SMT gull wing 1-1462037-4 IM03SR SMT short gull wing 2-1462040-5 IM03JR SMT J-leg 1-1462037-6 IM03NS THT narrow 1-1462038-3 IM03TS THT standard 1-1462037-8 IM04GR 6VDC SMT gull wing 4-1462037-2 IM04JR SMT J-leg 4-1462037-4 IM04NS THT narrow 1-1462038-4 IM05GR 9VDC SMT gull wing 3-1462037-4 IM05SR SMT short gull wing 2-1462040-6 IM05JR SMT J-leg 4-1462037-5 IM05NS THT narrow 1-1462038-5 IM05TS THT standard 2-1462037-2 IM06GR 12VDC SMT gull wing 2-1462037-3 IM06SR SMT short gull wing 2-1462040-7 IM06JR SMT J-leg 4-1462037-6 IM06NS THT narrow 1-1462038-6 IM07GR 24VDC SMT gull wing 4-1462037-7 IM07SR SMT short gull wing 2-1462040-8 IM07JR SMT J-leg 4-1462037-8 IM07NS THT narrow 1-1462038-7 IM08GR 2.4VDC SMT gull wing 6-1462039-3 IM11GR 3VDC High sens. 9-1462038-5 IM12GR 4.5VDC 1462039-3 IM13GR 5VDC 1462039-4 IM16GR 12VDC 1462039-5 IM17GR 24VDC 1462039-6 IM17TS THT standard 4-1462039-6 IM21GR 3VDC Ultra high sensitive SMT gull wing 2-1462039-6 IM21TS THT standard 1-1462039-5 IM22GR 4.5VDC SMT gull wing 2-1462039-7 IM22TS THT standard 2-1462039-8 IM23GR 5VDC SMT gull wing 2-1462039-9 IM23TS THT standard 3-1462039-0 IM23KS THT short 6-1462039-7 IM26GR 12VDC SMT gull wing 3-1462039-1 IM26TS THT standard 3-1462039-2 INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number 3) IM40GR 2 form C, 2 CO contacts Standard 1.5VDC Bistable Standard SMT gull wing 5-1462037-1 3) IM40SR SMT short gull wing 2-1462040-9 3) IM40JR SMT J-leg 5-1462037-2 3) IM40NS THT narrow 1-1462038-8 3) IM40TS THT standard 5-1462037-0 3) IM41GR 3VDC SMT gull wing 5-1462037-4 3) IM41SR SMT short gull wing 2-1462040-0 3) IM41JR SMT J-leg SMT 5-1462037-5 3) IM41NS THT narrow 1-1462038-9 3) IM41TS THT standard 5-1462037-3 3) IM42GR 4.5VDC SMT gull wing 3-1462037-1 3) IM42SR SMT short gull wing 3-1462040-1 3) IM42JR SMT J-leg 5-1462037-7 3) IM42NS THT narrow 2-1462038-0 3) IM42TS THT standard 5-1462037-6 3) IM43GR 5VDC SMT gull wing 5-1462037-9 3) IM43SR SMT short gull wing 3-1462040-2 3) IM43JR SMT J-leg 6-1462037-0 3) IM43NS THT narrow 2-1462038-1 3) IM43TS THT standard 5-1462037-8 3) IM44GR 6VDC SMT gull wing 6-1462037-2 3) IM44SR SMT short gull wing 3-1462040-3 3) IM44JR SMT J-leg 6-1462037-3 3) IM44NS THT narrow 2-1462038-2 3) IM44TS THT standard 6-1462037-1 3) IM45GR 9VDC SMT gull wing 6-1462037-4 3) IM45SR SMT short gull wing 3-1462040-4 3) IM45JR SMT J-leg 6-1462037-5 3) IM45NS THT narrow 2-1462038-3 3) IM46GR 12VDC SMT gull wing 6-1462037-7 IM46SR SMT short gull wing 3-1462040-5 3) IM46JR SMT J-leg 6-1462037-8 3) IM46NS THT narrow 2-1462038-4 3) IM46TS THT standard 6-1462037-6 IM47GR 24VDC SMT gull wing 7-1462037-0 IM47JR SMT J-leg 7-1462037-1 IM47NS THT narrow 2-1462038-5 IM47TS THT standard 6-1462037-9 3) IM48GR 2.4VDC SMT gull wing 1462039-8 3) IM48SR SMT short gull wing 3-1462040-6 3) Type VDE certified, for more information contact TE INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number IM01CGR 2 form C, 2 CO contacts High dielectric 3VDC Monostable Standard SMT gull wing 1462038-4 IM01CTS THT standard 9-1462038-6 IM02CGR 4.5VDC SMT gull wing 1462038-1 IM03CGR 5VDC 1462038-2 IM03CJR SMT J-leg 4-1462039-8 IM03CTS THT standard 4-1462039-7 IM05CGR 9VDC SMT gull wing 1462038-3 IM06CGR 12VDC 9-1462037-9 IM06CJR SMT J-leg 3-1462039-4 IM06CTS THT standard 4-1462037-9 IM07CGR 24VDC SMT gull wing 1462039-2 IM07CTS THT standard 1462039-1 IM17CGR High sens. SMT gull wing 1462039-7 3) IM41CGR 3VDC Bistable Standard 4-1462039-2 3) IM42CGR 4.5VDC 4-1462039-1 3) IM43CGR 5VDC 9-1462038-7 3) IM48CGR 2.4VDC 9-1462039-0 IM02DGR High current 4.5VDC Monostable Standard SMT gull wing 9-1462038-8 IM02IJR SMT J-leg 1462047-8 IM02IGR SMT gull wing 1462047-9 IM03DGR 5VDC SMT gull wing 9-1462038-9 IM03DJR SMT J-leg 3-1462039-3 IM05DGR 9VDC SMT gull wing 1-1462039-7 IM06DGR 12VDC 1-1462039-8 IM06DJR SMT J-leg 7-1462039-0 IM06DTS THT standard 3-1462039-8 IM07DGR 24VDC SMT gull wing 3-1462039-7 IM07DJR SMT J-leg 7-1462039-4 IM07DTS THT standard 7-1462039-2 IM22DTS 4.5VDC U.h.sens. 7-1462039-6 IM41DGR 3VDC Bistable Standard SMT gull wing 6-1462039-8 IM42DGR 4.5VDC 1-1462039-9 IM42DNS THT narrow 1-1462039-6 IM46DNS 12VDC 1-1462039-2 IM47DJR 24VDC SMT J-leg 7-1462039-5 IM48DGR 2.4VDC SMT gull wing 1462039-9 IM49DGR 2VDC 2-1462039-2 IM40IGR 1.5VDC 1462047-7 IM48IGR 2.4VDC 1462047-1 IM49IGR 2VDC 1462047-4 3) Type VDE certified, for more information contact TE INDUSTRIAL / AXICOM IM RELAY AXICOM IM RELAY SIGNAL RELAYS

te.com ©2023 TE Connectivity Ltd. Family of Companies. All Rights Reserved. Axicom, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. 06/23 ED Notes: 1. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 2. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http:/ /relays.te.com/definitions. 3. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. Product code Arrangement Perf. type Coil Coil type Coil Terminals Part number IM02PGR High contact stability 4.5VDC Monostable Standard 5-1462039-4 IM02PNS THT narrow 5-1462039-8 IM03PGR 5VDC SMT gull wing 5-1462039-5 IM03PJR SMT J-leg 6-1462039-6 IM03PNS THT narrow 5-1462039-9 IM06PGR 12VDC SMT gull wing 5-1462039-6 IM06PNS THT narrow 6-1462039-0 IM42PGR 4.5VDC Bistable SMT gull wing 5-1462039-7 IM42PNS THT narrow 7-1462039-8 IM43PGR SMT gull wing 7-1462039-3 IM46PNS 12VDC THT narrow 6-1462039-1 3) Type VDE certified, for more information contact TE Note: This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. INDUSTRIAL / AXICOM IM RELAY