ILQ2

ILQ2_V01 VISHAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 1 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Optocoupler, Phototransistor Output (Dual, Quad Channel)

DESCRIPTION

The ILD1, ILD2, ILD5, ILQ1, ILQ2 are optically coupled isolated pairs employing GaAs infrared LEDs and silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the drive while maintaining a high degree of electrical isolation between input and output. The ILD1, ILD2, ILD5, ILQ1, ILQ2 are especially designed for driving medium-speed logic and can be used to eliminate troublesome ground loop and noise problems. Also these couplers can be used to replace relays and transformers in many digital interface applications such as CTR modulation. The ILD1, ILD2, ILD5 have two isolated channels in a single DIP package and the ILQ1, ILQ2 have four isolated channels per package.

FEATURES

• Current transfer ratio at IF = 10 mA
• Isolation rated voltage 4420 VRMS
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 AGENCY APPROVALS
• UL 1577
• cUL 1577
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• CQC
• CSA
• FIMKO
• FIMKO E C C E A C C A A C C A A C C A E C C E E C C E i179012-1 Dual Channel Quad Channel

ORDERING INFORMATION

ILx#-X0##T PART NUMBER x = D (dual) or Q (quad) PACKAGE OPTION TAPE AND REEL AGENCY CERTIFIED / PACKAGE DUAL CHANNEL QUAD CHANNEL CTR (%) UL, CSA, CQC, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 DIP-8 ILD1 ILD2 ILD5 - - DIP-8, 400 mil, option 6 - ILD2-X006 - - - SMD-8, option 7 ILD1-X007 ILD2-X007T (1) --- SMD-8, option 9 - ILD2-X009T (1) ILD5-X009 - - DIP-16 - - - ILQ1 ILQ2 DIP-16, 400 mil, option 6 - - - ILQ1-X006 - SMD-16, option 7 - - - ILQ1-X007 ILQ2-X007T (1) SMD-16, option 9 - - - ILQ1-X009T (1) ILQ2-X009T (1) > 0.1 mm 10.16 mm > 0.7 mm 7.62 mm DIP-# Option 7 Option 6 Option 9

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 2 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes

• Additional options may be possib le, please contact sales office (1) Also available in tubes; do not put T on end Notes
• Stresses in excess of the absolu te maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those give n in the operational sections of this document. Exposure to abs olute maximum ratings for extended periods of the time can adversely affect reliability (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for throught hole devices (DIP) VDE, UL, CSA, CQC, BSI, FIMKO 20 to 300 100 to 500 50 to 400 20 to 300 100 to 500 DIP-8 ILD1-X001 ILD2-X001 ILD5-X001 - - D I P - 1 6 ---- I L Q 2 - X 0 0 1 DIP-16, 400 mil, option 6 ---- I L Q 2 - X 0 1 6 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage V R 6V Forward current IF 60 mA Surge current IFSM 2.5 A Power dissipation Pdiss 100 mW Derate linearly from 25 °C 1.3 mW/°C OUTPUT Collector emitter reverse voltage ILD1 V CEO 50 V ILQ1 V CEO 50 V ILD2 V CEO 70 V ILQ2 V CEO 70 V ILD5 V CEO 70 V Collector current IC 50 mA t < 1 ms I C 400 mA Power dissipation Pdiss 200 mW Derate lineary from 25 °C 2.6 mW/°C COUPLER Package power dissipation P tot 250 mW Derate linearly from 25 °C 3.3 mW/°C Storage temperature Tstg -40 to +150 °C Operating temperature Tamb -40 to +100 °C Junction temperature Tj 100 °C Soldering temperature (1) 2 mm from case bottom T sld 260 °C AGENCY CERTIFIED / PACKAGE DUAL CHANNEL QUAD CHANNEL CTR (%)

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 3 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of en gineering evaluation. Typical values are for information only and are not part of the testing requirements Fig. 1 - Derating Diagram Fig. 2 - Test Pulse Diagram for Sample Test according to DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5 ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I F = 60 mA V F - 1.25 1.65 V Reverse current V R = 6 V I R -0 . 0 1 1 0μ A Capacitance V R = 0 V, f = 1 MHz C O -2 5-p F Thermal resistance, junction to lead T thJL - 750 - K/W OUTPUT Collector emitter capacitance V CE = 5 V, f = 1 MHz C CE -6 . 8-p F Collector emitter leakage current V VCE = 10 V I CEO - 5 50 nA Saturation voltage, collector emitter I C = 1 mA, IB = 20 μA V CESAT - 0.25 0.4 V DC forward current gain V CE = 10 V, IB = 20 μA h FE 200 650 1800 DC forward current gain saturated V CE = 0.4 V, IB = 20 μA h FEsat 120 400 600 Thermal resistance, junction to lead R thjl - 500 - K/W COUPLER Capacitance (input to output) V IO = 0 V, f = 1 MHz C IO -0 . 8-p F CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IC/IF (collector emitter saturated) IF =10 mA, VCE = 0.4 V ILD1 CTR CEsat -7 5-% ILQ1 CTR CEsat -7 5-% ILD2 CTR CEsat - 170 - % ILQ2 CTR CEsat - 170 - % ILD5 CTR CEsat - 100 - % IF =10 mA, VCE = 10 V ILD1 CTR CE 20 80 300 % ILQ1 CTR CE 20 80 300 % ILD2 CTR CE 100 200 500 % ILQ2 CTR CE 100 200 500 % ILD5 CTR CE 50 130 400 % TSI - Safety Temperature (°C) 100 150 200 250 300 350 400 450 0 25 50 75 100 125 150 175 Phototransistor PSO (mW) IR-diode ISI (mA) t 13930 t1, t2 = 1 s to 10 s t3, t4 = 1 s ttest = 10 s tstres = 12 s VIOTM Vpd VIOWM VIORM ttest tTr = 60 s tstres t3 t4

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 4 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Current V CE = 5 V, RL = 75 Ω, 50 % of VPP ILD1 I F -2 0- m A ILQ1 I F -2 0- m A ILD2 I F -5- m A ILQ2 I F -5- m A ILD5 I F -1 0- m A Delay V CE = 5 V, RL = 75 Ω, 50 % of VPP ILD1 t D -0 . 8- μ s ILQ1 t D -0 . 8- μ s ILD2 t D -1 . 7- μ s ILQ2 t D -1 . 7- μ s ILD5 t D -1 . 7- μ s Rise time V CE = 5 V, RL = 75 Ω, 50 % of VPP ILD1 t r -1 . 9- μ s ILQ1 t r -1 . 9- μ s ILD2 t r -2 . 6- μ s ILQ2 t r -2 . 6- μ s ILD5 t r -2 . 6- μ s Storage V CE = 5 V, RL = 75 Ω, 50 % of VPP ILD1 t s -0 . 2- μ s ILQ1 t s -0 . 2- μ s ILD2 t s -0 . 4- μ s ILQ2 t s -0 . 4- μ s ILD5 t s -0 . 4- μ s Fall time V CE = 5 V, RL = 75 Ω, 50 % of VPP ILD1 t f -1 . 4- μ s ILQ1 t f -1 . 4- μ s ILD2 t f -2 . 2- μ s ILQ2 t f -2 . 2- μ s ILD5 t f -2 . 2- μ s Propagation H to L V CE = 5 V, RL = 75 Ω, 50 % of VPP ILD1 t PHL -0 . 7- μ s ILQ1 t PHL -0 . 7- μ s ILD2 t PHL -1 . 2- μ s ILQ2 t PHL -1 . 2- μ s ILD5 t PHL -1 . 1- μ s Propagation L to H V CE = 5 V, RL = 75 Ω, 50 % of VPP ILD1 t PLH -1 . 4- μ s ILQ1 t PLH -1 . 4- μ s ILD2 t PLH -2 . 3- μ s ILQ2 t PLH -2 . 3- μ s ILD5 t PLH -2 . 5- μ s

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 5 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SATURATED Current V CE = 0.4 V, RL = 1 kΩ, VCC = 5 V, VTH = 1.5 V ILD1 I F -2 0- m A ILQ1 I F -2 0- m A ILD2 I F -5- m A ILQ2 I F -5- m A ILD5 I F -1 0- m A Delay VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V, VTH = 1.5 V ILD1 t D -0 . 8- μ s ILQ1 t D -0 . 8- μ s ILD2 t D -1- μ s ILQ2 t D -1- μ s ILD5 t D -1 . 7- μ s Rise time VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V, VTH = 1.5 V ILD1 t r -1 . 2- μ s ILQ1 t r -1 . 2- μ s ILD2 t r -2- μ s ILQ2 t r -2- μ s ILD5 t r -7- μ s Storage VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V, VTH = 1.5 V ILD1 t s -7 . 4- μ s ILQ1 t s -7 . 4- μ s ILD2 t s -5 . 4- μ s ILQ2 t s -5 . 4- μ s ILD5 t s -4 . 6- μ s Fall time VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V, VTH = 1.5 V ILD1 t f -7 . 6- μ s ILQ1 t f -7 . 6- μ s ILD2 t f - 13.5 - μs ILQ2 t f - 13.5 - μs ILD5 t f -2 0-μ s Propagation H to L VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V, VTH = 1.5 V ILD1 t PHL -1 . 6- μ s ILQ1 t PHL -1 . 6- μ s ILD2 t PHL -5 . 4- μ s ILQ2 t PHL -5 . 4- μ s ILD5 t PHL -2 . 6- μ s Propagation L to H VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V, VTH = 1.5 V ILD1 t PLH -8 . 6- μ s ILQ1 t PLH -8 . 6- μ s ILD2 t PLH -7 . 4- μ s ILQ2 t PLH -7 . 4- μ s ILD5 t PLH -7 . 2- μ s COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Common mode rejection, output high V CM = 50 VP-P, RL = 1 kΩ, IF = 0 mA CM H - 5000 - V/μs Common mode rejection, output low V CM = 50 VP-P, RL = 1 kΩ, IF = 10 mA CM L - 5000 - V/μs Common mode coupling capacitance C CM -0 . 0 1- p F SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 6 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note the safety ratings shall be ensured by means of protective circuits TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 3 - Non-Saturated Switching Schematic Fig. 4 - Non-Saturated Switching Timing Fig. 5 - Saturated Switching Schematic Fig. 6 - Saturated Switching Timing SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Climatic classification According to IEC 68 part 1 40/100/21 Comparative tracking index CTI 175 Maximum rated withstanding isolation voltage t = 1 min V ISO 4420 V RMS Maximum transient isolation voltage V IOTM 10 000 V peak Maximum repetitive peak isolation voltage V IORM 890 V peak Isolation resistance VIO = 500 V, Tamb = 25 °C R IO ≥ 1012 Ω VIO = 500 V, Tamb = 100 °C R IO ≥ 1011 Ω Output safety power PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 °C Creepage distance ≥ 7m m Clearance distance ≥ 7m m Insulation thickness DTI ≥ 0.4 mm iild1_01 VO VCC = 5 V RL = 75 Ω f = 10 kHz, DF = 50 % IF = 10 mA iild1_02 tD tR 50 % PHL tPLH tS tF t IF VO iild1_03 VO VCC = 5 V RL f = 10 KHz, DF = 50 % IF = 10 mA iild1_04 IF tR VO tD tS tFtPHL tPLH VTH = 1.5 V

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 7 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 7 - Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 8 - Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 9 - Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 10 - Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 11 - Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 12 - Collector Emitter Current vs. Temperature and LED Current iild1_05 10010 1 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 I F - Forward Current (mA) V F - Forward Voltage (V) T A = - 55 °C T A = 100 °C T A = 25 °C iild1_06 1001010.10.0 0.5 1.0 1.5 NCTR (SAT) NCTR IF - LED Current (mA) CTRNF - Normalized CTR Factor Normalized to: V CE= 10 V,IF = 10 mA TA= 25 °C CTRce(sat)VCE= 0.4 V iild1_07 1001010.10.0 0.5 1.0 1.5 NCTR (SAT) NCTR IF - LED Current (mA) CTRNF - Normalized CTR Factor Normalized to: V CE =10V, IF = 10 mA,TA= 25 °C TA= 50 °C CTRce(sat) VCE = 0.4 V iild1_08 1001010.1 0.0 0.5 1.0 1.5 IF - LED Current (mA) NCTR(SAT) NCTR Normalized to: V CE = 10 V, IF = 10 mA TA= 25 °C CTRce(sat)V CE = 0.4 V TA= 70 °C CTR - Normalized CTR Factor iild1_09 0.1 1 10 100 1.5 1.0 0.5 0.0 IF - LED Current (mA) NCTR - Normalized CTRNCTR(SAT) NCTR Normalized to: V CE= 10 V, IF = 10 mA, TA = 25 °C CTRce(sat) VCE = 0.4 V TA= 85 °C iild1_10 60503020100 50 °C 70 °C 85 °C IF- LED Current (mA) ICE - Collector Current (mA) 25 °C

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 8 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 13 - Collector Emitter Leakage Current vs.Temperature Fig. 14 - Propagation Delay vs. Collector Load Resistor PACKAGE DIMENSIONS in millimeters iild1_11 100806040200- 20 - 2 - 1 TA - Ambient Temperature (°C) ICEO - Collector Emitter (nA) Vce = 10 V Typical iild1_12 RL- Collector Load Resistor (kΩ) 1001010.1 100 1000 1.0 1.5 2.0 2.5 tpLH tpHL tpLH - Propagation Low-High (µs) tpHL - Propagation High-Low (µs) TA = 25 °C, IF = 10 mA Vcc = 5 V, Vth = 1.5 V i178006 Pin one ID 6.645 ± 0.165 9.77 ± 0.14 0.95 ± 0.19 4° typ. 2.54 typ. 0.51 ± 0.05 3.555 ± 0.255 0.70 ± 0.19 10° 3° to 9° 7.62 typ. 0.25 ± 0.05 3.045 ± 0.255 6.095 ± 0.255 4 3 2 1 0.79 1.27 5 6 7 8 I S Om e t h o dA

ILD1, ILD2, ILD5, ILQ1, ILQ2 www.vishay.com Vishay Semiconductors Rev. 2.0, 10-Mar-2021 9 Document Number: 83646 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE DIMENSIONS in millimeters PACKAGE MARKING (example) Notes

• Only option 1 and 7 reflected in the package marking
• The VDE logo is only marked on option 1 parts
• Tape and reel suffix (T) is not part of the package marking i178007 6.48 6.81 19.77 20.07 0.76 1.14 2.54 typ. 10° typ. 3° to 9° 0.46 0.56 0.20 0.30 2.79 3.30 Pin one ID 3.30 3.81 8 7 6 5 4 3 2 1 9 10 11 12 13 14 15 16 7.62 typ. 5.84 6.351.27 ISO method A 0.51 0.89 0.79 18450-9 0.35 0.25 10.16 10.92 7.8 7.4 10.36 9.96 Option 6 8 min. 7.62 typ. 4.6 4.1 8.4 min. 10.3 max. 0.7 Option 7 R 0.010 (0.25) 0.100 (2.54) 0.030 (0.76) 0.070 (1.78) 0.060 (1.52) 0.435 (11.05) 0.315 (8.00) min. 8 min. 0.51 1.02 7.62 ref. 9.53 10.03 0.25 typ. 0.102 0.249 15° max. Option 9 0.030 (0.76) 0.070 (1.78) 0.060 (1.52) 0.435 (11.05) 0.315 (8.00) min. ILD2 V YWW H 68 ILQ2 V YWW H 68

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED