ILK-FLEXEXT-0310-001.

Online Datasheet

Read ILK-FLEXEXT-0310-001. online.

ILX-E507-XX10-3240-SD2XX ILS | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 11

Technical content

© IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 1 of 1 1 OSRAM High Bright PowerFlex LED Strips 7 .5mm LED Pitch ILX-E507-xx10-3240-SD2xx The PowerFlex range are densely populated, high bright, flexible LED strips using the OSRAM DURIS E5/E2825 LED at its heart. Unlike standard flexible LED strips, the ILX range of strips from ILS incorporate constant current drivers, protection diodes and the latest 3M thermal tape. This combination gives unparalleled performance with brightness in excess of 3000 lumens per metre whilst still achieving 50,000 hours working life. Combined with a full range of accessories including extrusions and connectors, the ILX family of flexible LED reels finally offers a solution for the industrial as well as consumer markets.

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 2 of 1 1 APPLICATIONS INCLUDE » General and decorative lighting » Task lighting » Back lighting » Desk lighting » Garage lighting » Accent lighting » Under cabinet lighting » Bar lighting » Refrigeration » Industrial applications » Photography TECHNICAL FEATURES LED/s DURIS E5/E2825 LEDs Reel Length 3240mm LED Pitch 7 .5mm Lumens (brightness) 1200 Lumen per reel / 3456 lumens per metre Working Voltage 24V DC constant voltage Strip Width 10mm Dimmable Fully dimmable with external controller Beam Angle 120 Degrees Cut Cut lines every 45mm Mounting 3M double sided thermal tape Consistency Precise LED binning selection enables 100% consistent colour temperature from batch to batch Heatsinks These Heatsinks are supplied with end caps, mounting brackets and 2 diffusers - clear or diffused. Suitable options on page 6 or visit our website for a full range Power Supply Product Family 7 .5mm Pitch – Reel Length 3240mm, 45mm Cut Point. Suitable options on page 7 or visit our website for a full range.

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 3 of 1 1 PRODUCT OPTIONS ILS Part Number Colour Colour Temp* (Degrees Kelvin) Typical Power W § Drive Voltage Flux † per 3240mm reel Radiance Angle Relevant OSRAM LED Dataper 3240mm per 45mm cut ILX-E507-WM10-3240-SD201 Warm White (3000K) 70.00W 0.96W 24V 8064lm 120˚ (±60°) GWJDSH / GWJTLMS1 ILX-E507-NW10-3240-SD201 Neutral White (4000K) 70.00W 0.96W 24V 8064lm 120˚ (±60°) GWJDSH / GWJTLMS1 ILX-E507-WM10-3240-SD21 1 Warm White (3000K) 104.00W 1.44W 24V 1 1200lm 120˚ (±60°) GWJDSH / GWJTLMS1 ILX-E507-NW10-3240-SD21 1 Neutral White (4000K) 104.00W 1.44W 24V 1 1200lm 120˚ (±60°) GGWJDSH / GWJTLMS1 ILX-E507-SW10-3240-SD201 Street White (5500K) 70.00W 0.96W 24V 8064lm 120˚ (±60°) GWJDSH / GWJTLMS1 ILX-E507-SW10-3240-SD21 1 Street White (5500K) 104.00W 1.44W 24V 1 1200lm 120˚ (±60°) GWJDSH / GWJTLMS1 *Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. § Tolerance +/- 10% † Measured with 20mS 350mA pulse at 25˚C MINIMUM AND MAXIMUM RATINGS ILS Part Number Operating Temperature at Tc-Point [˚C]* Storage Temperature [˚C]* Forward Current per chip [mA]* Reverse Voltage [Vdc]* ILX-E507-WM10-3240-SD201. 70°C max - 40 to 1 10˚C 24V max Not designed for reverse voltage ILX-E507-NW10-3240-SD201. 70°C max - 40 to 1 10˚C 24V max Not designed for reverse voltage ILX-E507-WM10-3240-SD21 1. 70°C max - 40 to 1 10˚C 24V max Not designed for reverse voltage ILX-E507-NW10-3240-SD21 1 70°C max - 40 to 1 10˚C 24V max Not designed for reverse voltage ILX-E507-SW10-3240-SD201. 70°C max - 40 to 1 10˚C 24V max Not designed for reverse voltage ILX-E507-SW10-3240-SD21 1. 70°C max - 40 to 1 10˚C 24V max Not designed for reverse voltage * Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED module. Exceeding maximum ratings for operating voltage will cause hazardous overload and is likely to destroy the LED module. The temperature of the LED module must be measured at the Tc-Point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label.

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 4 of 1 1 Lenses and Reflectors LEDiL precision-engineered Lenses and Reflectors allow for rapid deployment of all types of light fixtures, including street lights, wall-wash, high-bay, sconces, emergency beacons, parking garage/low-bay, MR and AR downlights, and dock lights. Precision-engineered for maximum efficiency and durability, LEDiL Lenses and Reflectors are released alongside the latest product releases from our LED suppliers. Visit our website for a full range. Heatsinks ILS has a series of Aluminium Alloy Heatsinks to be used with our standard range of PowerFlex.These Heatsinks are supplied with end caps, mounting brackets and 2 diffusers - clear or diffused. ILS is continually expanding its Heatsink range and we are equally happy to manufacture custom Heatsinks upon your request. Suitable options on page 8 or visit our website for a full range. Power Supplies ILS has a comprehensive range of standard Power Supplies. The table below shows the total number of ILS products each Power Supply can drive. Additional Power Supplies are being introduced so please call us or check our website for the latest offering. Suitable options on page 7 Thermal Interface Material (TIM) ILS have produced a range of High-performance, cost effective Thermal Interface Materials to match perfectly their standard products. Our product fills the air pockets between the two surfaces, forming a continuous layer to conduct heat away from the LED to the Heatsink. These strips have 3M thermal tape already attached for perfect thermal bonding. ACCESSORIES

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 5 of 1 1 TECHNICAL DRAWINGS (MM) 3D drawing files are available on request from ILS. Please call or email RADIATION OF SINGLE LED

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 6 of 1 1 POWERFLEX HEATSINK OPTIONS ILS has a series of Aluminium Alloy Heatsinks to be used with our standard range of PowerFlex. These Heatsinks are supplied with end caps, mounting brackets and 2 diffusers - clear or diffused. ILS is continually expanding its Heatsink range and we are equally happy to manufacture custom Heatsinks upon your request. ILS Product ILK-FLEXEXT-0310-001. 310mm Accessory Kit including Square Extrusion, End Caps, 2 Diffusers and Mounting Clips ILK-FLEXEXT-1000-001. 1000mm Accessory Kit including Square Extrusion, End Caps, 2 Diffusers and Mounting Clips ILK-FLEXEXT-1500-001. 1500mm Accessory Kit including Square Extrusion, End Caps, 2 Diffusers and Mounting Clips ILK-FLEXEXT-0310-002. 310mm Accessory Kit including Corner Extrusion, End Caps, 2 Diffusers and Mounting Clips ILK-FLEXEXT-1000-002. 1000mm Accessory Kit including Corner Extrusion, End Caps, 2 Diffusers and Mounting Clips ILK-FLEXEXT-1500-002. 1500mm Accessory Kit including Corner Extrusion, End Caps, 2 Diffusers and Mounting Clips Click here to visit our website for our latest range

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 7 of 1 1 POWERFLEX POWER SUPPLY OPTIONS Product Family 7 .5mm Pitch – Reel Length 3240mm, 45mm Cut Point High Bright = ILX-E507-xx10-3240-SD201 Super Bright = ILX-E507-xx10-3240-SD21 1 Part Number Wattage Voltage Dimming High Bright Flex 0.96W per cut 70.00W per reel Super Bright Flex 1.44W per cut 104.00W per reel Reels per Driver Cuts per Driver Reels per Driver Cuts per Driver OT 6/200…240/24 CE 6W 24V None 0 6 0 4 OT 20/220…240/24 20W 24V None 0 20 0 13 OT 20/220…240/24 P 20W 24V None 0 20 0 13 OT 20/220…240/24 DIM P 20W 24V 1-10V 0 20 0 13 ELEMENT 30/220-240/24 G2 30W 24V None 0 31 0 20 IZV024-040M- 9767C-SAL 40W 24V 0-10V, PWM Signal or Resistance 0 41 0 27 OT SLIM 30/220-240/24 30W 24V None 0 31 0 20 OT 40/220…240/24 P 40W 24V None 0 41 0 27 OT 40/220…240/24 DIM P 40W 24V 1-10V 0 41 0 27 OT 50/220…240/24 50W 24V None 0 52 0 34 IZV024-060M- 9767C-SAL 60W 24V 0-10V, PWM Signal or Resistance 0 62 0 41 ELEMENT 60/220-240/24 G2 60W 24V None 0 62 0 41 OT 60/220…240/24 P 60W 24V None 0 62 0 41 OT SLIM 60/220-240/24 60W 24V None 0 62 0 41 OT 60/220…240/24 DIM P 60W 24V 1-10V 0 62 0 41

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 8 of 1 1 Part Number Wattage Voltage Dimming High Bright Flex 0.96W per cut 70.00W per reel Super Bright Flex 1.44W per cut 104.00W per reel Reels per Driver Cuts per Driver Reels per Driver Cuts per Driver OT 75/220…240/24 75W 24V None 1 78 0 52 IZV024-090M- 9767C-SAL 90W 24V 0-10V, PWM Signal or Resistance 1 93 0 62 OT 100/220…240/24 P 100W 24V None 1 104 0 69 OT 100/220…240/24 DIM P 100W 24V 1-10V 1 104 0 69 IZV024-120M- 9767C-SAL 120W 24V 0-10V, PWM Signal or Resistance 1 125 1 83 ELEMENT 120/220-240/24 G2 120W 24V None 1 125 1 83 OT 130/220…240/24 P 130W 24V None 1 135 1 90 OT 130/220…240/24 DIM P 130W 24V 1-10V 1 135 1 90 OT SLIM 160/220-240/24 160W 24V None 2 260 1 111 ELEMENT 180/220-240/24 G2 180W 24V None 2 187 1 125 OT 250/220…240/24 P 250W 24V None 3 260 2 173 OT 250/220…240/24 DIM P 250W 24V 1-10V 3 260 2 173 OT SLIM 250/220-240/24 250W 24V None 3 260 2 173 Click here to visit our website for our latest range POWERFLEX THERMAL INTERFACE MATERIAL OPTIONS These strips have 3M thermal tape already attached for perfect thermal bonding. Click here to visit our website for our latest range

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 9 of 1 1 ASSEMBLY INFORMATION » The mounting of the PowerFlex DURIS E5 flexible has to be on a metal Heatsink. » In order to optimise the thermal management, the metal surface needs to be clean (dirt and oil free) and planar for the best contact with the LED module. A thermal grease or heat transfer material is highly recommended. IMPORTANT INFORMATION AND PRECAUTIONS The PowerFlex LEDs, when powered up, are very bright. Thus it is advised that you do not look directly at them. Turn the PowerFlex product away from you and do not shine into the eyes of others. PowerFlex will overheat in operation if not attached to a suitable Heatsink. Over heating can cause failure or irreparable damage. PowerFlex products, when operated, can reach high temperatures, thus there is a risk of injury if they are touched. DO NOT HOT PLUG ON LED SIDE OF POWER SUPPLY DO NOT TOUCH or PUSH on the LED as this might cause irreparable damage.

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 10 of 1 1 The LED module itself and all its components must not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board. The mounting of the module is carried out by attaching it to the mounting holes. Metal mounting screws must be insulated with synthetic washers to prevent circuit board damage and possible short circuiting. To avoid mechanical damage to the connecting cables, the boards should be attached securely to the intended substrate. Heavy vibration should be avoided. Observe correct polarity! Depending on the product, incorrect polarity will lead to emission of red or no light. The module can be destroyed! Pay attention to standard ESD precautions when installing the PowerFlex. SAFETY INFORMATION The PowerFlex, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. Damage by corrosion will not be accepted as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. For outdoor usage, a housing is definitely required to protect the board against environmental influences. The design of the housing must correspond to the IP standards in the application. It is also the responsibility of the user to ensure any housings or modifications keep the Tc junction temperature to within stated ranges. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 61374-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61374-2-13 and IEC/EN 62384. The evaluation of eye safety occurs according to the standard IEC 62471:2006 (“photobiological safety of lamps and lamp systems”). Within the risk grouping system of this CIE standard, the LED specified in this data sheet falls into the class “moderate risk” (exposure time 0.25s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment and even accidents, depending on the situation.

PRODUCT DATASHEET » ILX-E507-xx10-3240-SD2xx © IGS Version V5 Intelligent LED Solutions , Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW A division of Intelligent Group Solutions Ltd 1 1 of 1 1 FURTHER INFORMATION The values contained in this datasheet can change due to technical innovation. Any such changes will be made without separate notification. If you require further assistance or have an specific or custom enquiries, please contact the ILS team via email or phone. Alternatively please visit our website for more product info and to see our full ranges. Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW +44 (0)1635 294606 info@i-led.co.uk www.i-led.co.uk ABOUT ILS ILS offers a high level of technical skill, professionalism and commercial understanding to companies requiring market leading optoelectronics solutions. Offering conceptual advice, electronics design and manufacturing capability, we use high quality production resources both in house and in Asia, providing project support from prototyping to mass production. We also understand the need to provide cost effective solutions and we do so using high quality components to ensure that the end product’s reliability and quality is uncompromised. Apart from LEDs in the visible spectrum, we have a wide range of Infrared, UV LEDs, UV tubes, and Lasers. ILS is a division of Intelligent Group Solutions Ltd (IGS) a well-established respected industry leading Optoelectronics solutions provider. Much of IGS’ business comes from providing semi-custom or custom products both in component and sub-assembly form. This comes from providing design support and prototyping within the European market place. With the capability to deliver production displays to wherever in the world that the customer’s manufacturing or assembly is being undertaken. INTELLIGENT GROUP SOLUTIONS DIVISIONS HORTICULTURAL SOLUTIONS

Product Information