ILD620_V02 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 1 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Optocoupler, Phototransistor Output, AC Input (Dual, Quad Channel)

DESCRIPTION

The ILD620, ILQ6 20, ILD620GB, and ILQ620GB are multi-channel input phototrans istor optocouplers that use inverse parallel GaAs IRLED emitter and high gain NPN silicon phototransistors per channel. These devices are constructed using over/under leadframe optical coupling and double molded insulation resulting in a withstand test voltage of 5300 V RMS. The LED parameters and the linear CTR characteristics make these devices well suited for AC voltage detection. The ILD620GB and ILQ6 20GB with its low I F guaranteed CTRCEsat minimizes power dissipation of the A C voltage detection network that is placed in series with the LEDs. Eliminating the phototransistor base connection provides added electrical noise immunity from the transients found in many industrial control environments.

FEATURES

  • Identical channel to channel footprint
  • ILD620 crosses to TLP620-2
  • ILQ620 crosses to TLP620-4
  • High collector emitter voltage, BV CEO = 70 V
  • Dual and quad packages feature: - Reduced board space - Lower pin and parts count - Better channel to channel CTR match - Improved common mode rejection
  • Isolation test voltage 5300 VRMS
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 AGENCY APPROVALS
  • UL1577, file no. E52744 system code H, double protection
  • cUL tested to CSA 22.2 bulletin 5A
  • DIN EN 60747-5-5 (VDE 0884)
  • F I M K O
  • CQC GB4943.1-2011 and GB8898:2011 (suitable for installation altitude below 2000 m) Notes
  • Additional options may be possib le, please contact sales office. (1) Also available in tubes, do not put T on the end. E C C E A/C A/C A/C A/C E C C E E C C E A/C A/C A/C A/C A/C A/C A/C A/C VDE Dual Channel Quad Channel

ORDERING INFORMATION

ILx620xx-X0##T PART NUMBER x = D (Dual) or Q (Quad) PACKAGE OPTION TAPE AND REEL AGENCY CERTIFIED/PACKAGE DUAL CHANNEL QUAD CHANNEL CTR (%) UL, cUL, FIMKO 50 to 600 100 to 600 50 to 600 100 to 600 DIP-8 ILD620 ILD620GB - - SMD-8, option 7 ILD620-X007T (1) --- SMD-8, option 9 ILD620-X009T (1) ILD620GB-X009T (1) -- DIP-16 - - ILQ620 ILQ620GB SMD-16, option 7 - - ILQ620-X007 - SMD-16, option 9 - - ILQ620-X009T (1) ILQ620GB-X009T (1) VDE, UL, cUL, FIMKO 50 to 600 100 to 600 50 to 600 100 to 600 DIP-16 - - ILQ620-X001 - SMD-16, option 9 - - ILQ620-X019T (1) - > 0.1 mm> 0.7 mm 7.62 mm DIP Option 7 Option 9

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 2 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes

  • Stresses in excess of the absolu te maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those give n in the operational sections of this document. Exposure to abs olute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Forward current I F ± 60 mA Surge current IFSM ± 1.5 A Power dissipation Pdiss 100 mW Derate linearly from 25 °C 1.3 mW/°C OUTPUT Collector emitter breakdown voltage BV CEO 70 V Collector current IC 50 mA t < 1 s I C 100 mA Power dissipation Pdiss 150 mW Derate from 25 °C 2m W / ° C COUPLER Isolation test voltage t = 1 s V ISO 5300 V RMS Isolation voltage VIORM 890 V P Total power dissipation P tot 250 mW ILD620GB 400 mW Derate from 25 °C 5.33 mW/°C ILQ620GB 500 mW Derate from 25 °C 6.67 mW/°C Creepage distance  7m m Clearance distance  7m m Isolation resistance VIO = 500 V, Tamb = 25 °C R IO  1012  VIO = 500 V, Tamb = 100 °C R IO  1011  Storage temperature Tstg - 55 to + 150 °C Operating temperature T amb - 55 to + 100 °C Junction temperature Tj 100 °C Soldering temperature (1) 2 mm from case bottom T sld 260 °C ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I F = ± 10 mA V F 1 1.15 1.3 V Forward current V R = ± 0.7 V I F 2.5 20 μA Capacitance V F = 0 V, f = 1 MHz C O 25 pF Thermal resistance, junction to lead R thJL 750 K/W OUTPUT Collector emitter capacitance V CE = 5 V, f = 1 MHz C CE 6.8 pF Collector emitter leakage current VCE = 24 V I CEO 10 100 nA TA = 85 °C, VCE = 24 V I CEO 25 0 μ A Thermal resistance, junction to lead R thJL 500 K/W

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 3 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of en gineering evaluation. Typical values are for information only and are not part of the testing requirements. Note
  • According to DIN EN 60747-5-5 (VDE 0884) (see figure 2). This optocoupler is suitable for safe electr ical isolation only withi n the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. COUPLER Off-state collector current V F = ± 0.7 V, VCE = 24 V I CEoff 11 0 μ A Collector emitter saturation voltage IF = ± 8 mA, ICE = 2.4 mA ILD620 V CEsat 0.4 V ILQ620 V CEsat 0.4 V IF = ± 1 mA, ICE = 0.2 mA ILD620GB V CEsat 0.4 V ILQ620GB V CEsat 0.4 V CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Channel/channel CTR match I F = ± 5 mA, VCE = 5 V CTRX/CTRY 1 to 1 3 to 1 CTR symmetry I CE (IF = - 5 mA)/ICE (IF = + 5 mA) I CE(RATIO) 0.5 2 Current transfer ratio  (collector emitter saturated) IF = ± 1 mA, VCE = 0.4 V ILD620 CTR CEsat 60 % ILQ620 CTR CEsat 60 % Current transfer ratio  (collector emitter) IF = ± 5 mA, VCE = 5 V ILD620 CTR CE 50 80 600 % ILQ620 CTR CE 50 80 600 % Current transfer ratio  (collector emitter saturated) IF = ± 1 mA, VCE = 0.4 V ILD620GB CTR CEsat 30 % ILQ620GB CTR CEsat 30 % Current transfer ratio  (collector emitter) IF = ± 5 mA, VCE = 5 V ILD620GB CTR CEsat 100 200 600 % ILQ620GB CTR CEsat 100 200 600 % SAFETY AND INSULATION RATED PARAMETERS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Partial discharge test voltage - routine test 100 %, ttest = 1 s V pd 1.669 kV Partial discharge test voltage - lot test (sample test) tTr = 60 s, ttest = 10 s, (see figure 2) VIOTM 10 kV Vpd 1.424 kV Insulation resistance VIO = 500 V R IO 1012  VIO = 500 V, Tamb = 100 °C R IO 1011  VIO = 500 V, Tamb  150 °C (construction test only) RIO 109  Forward current I si 275 mA Power dissipation P SO 400 mW Rated impulse voltage V IOTM 10 kV Safety temperature T si 175 °C ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 4 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 1 - Derating Diagram Fig. 2 - Test Pulse Diagram for Sample Test According to DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5 Tsi - Safety Temperature (°C) 100 150 200 250 300 350 400 450 0 25 50 75 100 125 150 175 Phototransistor Pso (mW) IR-diode Isi (mA) t 13930 t1, t2 = 1 s to 10 s t3, t4 = 1 s ttest = 10 s tstres = 12 s VIOTM Vpd VIOWM VIORM ttest tTr = 60 s tstres t3 t4 SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED On time I F = ± 10 mA, VCC = 5 V, RL = 75 , 50 % of VPP ton 3μ s Rise time IF = ± 10 mA, VCC = 5 V, RL = 75 , 50 % of VPP tr 20 μs Off time IF = ± 10 mA, VCC = 5 V, RL = 75 , 50 % of VPP toff 2.3 μs Fall time IF = ± 10 mA, VCC = 5 V, RL = 75 , 50 % of VPP tf 2μ s Propagation H to L IF = ± 10 mA, VCC = 5 V, RL = 75 , 50 % of VPP tPHL 1.1 μs Propagation L to H IF = ± 10 mA, VCC = 5 V, RL = 75 , 50 % of VPP tPLH 2.5 μs SATURATED On time I F = ± 10 mA, VCC = 5 V, RL = 1 k, VTH = 1.5 V, ton 4.3 μs Rise time IF = ± 10 mA, VCC = 5 V, RL = 1 k, VTH = 1.5 V, tr 2.8 μs Off time IF = ± 10 mA, VCC = 5 V, RL = 1 k, VTH = 1.5 V, toff 2.5 μs Fall time IF = ± 10 mA, VCC = 5 V, RL = 1 k, VTH = 1.5 V, tf 11 μs Propagation H to L IF = ± 10 mA, VCC = 5 V, RL = 1 k, VTH = 1.5 V, tPHL 2.6 μs Propagation L to H IF = ± 10 mA, VCC = 5 V, RL = 1 k, VTH = 1.5 V, tPLH 7.2 μs

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 5 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 3 - Non-Saturated Switching Timing Fig. 4 - Saturated Switching Timing Fig. 5 - Non-Saturated Switching Timing Fig. 6 - Saturated Switching Timing Fig. 7 - LED Forward Current vs.Forward Voltage Fig. 8 - Collector Emitter Leakage vs. Temperature iild620_01 VO VCC = 5 V RL = 75 Ωf = 10 kHz, DF = 50 % I F = 10 mA iild620_02 VO VCC = 5 V R L = 1 kΩ f = 10 kHz, DF = 50 % IF = 10 mA iild620_03 tR t F tD 50 % tPLH VO IF tPLH tS ton toff iild620_04 IF tR VO tD tS tFtPHL tPLH V TH = 1.5 V iild620_05 - 20 - 40 - 60 VF - LED Forward Voltage (V) IF - LED Forward Current (mA) 85 °C 25 °C - 55 °C iild620_06 - 20 0 20 40 60 80 100 105 104 103 102 101 100 10- 1 10- 2 TA - Ambient Temperature (°C) ICEO - Collector Emitter (nA) Typical VCE = 10 V

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 6 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 9 - Maximum LED Current vs. Ambient Temperature Fig. 10 - Maximum LED Power Dissipation Fig. 11 - Collector Current vs. Diode Forward Current Fig. 12 - Normalization Factor for Non-Saturated and Saturated CTR vs. IF Fig. 13 - Normalization Factor for Non-Saturated and Saturated CTR vs. IF Fig. 14 - Normalization Factor for Non-Saturated and Saturated CTR vs. IF - 60 - 40 - 20 0 20 40 60 80 100 120 100 Tamb - Ambient Temperature (°C) IF - Maximum LED Current (mA) TJ (max.) = 100 °C iild620_07 iild620_08 - 60 - 40 - 20 20 40 60 80 100 200 100 Tamb - Ambient Temperature (°C) PLED - LED Power (mW) 150 iild620_09 11 0 2 0 100 2.5 5.0 1.0 0.5 0.1 IC - Normalized Collector Current ILD/Q620 Normalized IF = 10 mA VCE = 5 V ILD/Q620GB IF - Forward Current (mA) iild620_10CTRNF - Normalized CTR Factor 0.1 1 10 100 2.0 1.5 1.0 0.5 0.0 IF - LED Current (mA) NCTRce TA = 50 °C Normalized to: VCE = 10 V, IF = 5 mA CTRce(sat) VCE = 0.4 V NCTRce(sat) iild620_11 0.1 1 10 100 2.0 1.5 1.0 0.5 0.0 NCTR ce TA = 70 °C Normalized to: NCTRce(sat) CTRNF - Normalized CTR Factor IF - LED Current (mA) VCE = 10 V, IF = 5 mA CTRce(sat) VCE = 0.4 V iild620_12 0.1 1 10 100 2.0 1.5 1.0 0.5 0.0 NCTR ce TA = 100 °C Normalized to: NCTRce(sat) CTRNF - Normalized CTR Factor IF - LED Current (mA) VCE = 10 V, IF = 5 mA CTRce(sat) VCE = 0.4 V

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 7 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 15 - Peak LED Current vs. Pulse Duration,  Fig. 16 - Maximum Detector Power Dissipation Fig. 17 - Maximum Collector Current vs. Collector Voltage PACKAGE DIMENSIONS in millimeters iild620_13 10- 6 10- 5 10- 4 10- 3 10- 2 10- 1 100 101 10 000 1000 100 t - LED Pulse Duration (s) IF(pk) - Peak LED Current (mA) 0.005 0.05 0.02 0.01 0.1 0.2 0.5 Duty Factor t DF = /tτ τ iild620_14 - 60 - 40 - 20 0 20 40 60 80 100 100 150 200 Tamb - Ambient Temperature (°C) PDET - Detector Power (mW) iild620_15 0.1 10 100 1000 100 0.1 VCE - Collector Emitter Voltage (V) ICE - Collector Current (mA) 25 °C 50 °C 75 °C 90 °C Rth = 500 °C /W i178006 Pin one ID 6.645 ± 0.165 9.77 ± 0.14 0.95 ± 0.19 4° typ. 2.54 typ. 0.51 ± 0.05 3.555 ± 0.255 0.70 ± 0.19 10° 3° to 9° 7.62 typ. 0.25 ± 0.05 3.045 ± 0.255 6.095 ± 0.255 4 3 2 1 0.79 1.27 5 6 7 8 ISO method A

ILD620, ILD620GB, ILQ620, ILQ620GB www.vishay.com Vishay Semiconductors Rev. 1.8, 12-Apr-13 8 Document Number: 83653 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE MARKING (example) Notes

  • Only option 1 and 7 reflected in the package marking.
  • The VDE logo is only marked on option 1 parts.
  • Tape and reel suffix (T) is not part of the package marking. i178007 6.48 6.81 19.77 20.07 0.76 1.14 2.54 typ. 10° typ. 3° to 9° 0.46 0.56 0.20 0.30 2.79 3.30 Pin one ID 3.30 3.81 8 7 6 5 4 3 2 1 9 10 11 12 13 14 15 16 7.62 typ. 5.84 6.35 1.27 ISO method A 0.51 0.89 0.79 20802-16 Option 7 Option 9 8 min. 7.62 typ. 4.3 ± 0.3 0.6 min. 10.3 max. 0.7 min. 10.3 max. 7.62 typ. 8 min.0.6 min. 2.54 R 0.25 1.78 0.76 1.528 min. 11.05 2.54 R 0.25 1.78 0.76 1.528 min. 11.05 21764-95 ILD620 V YWW H 68 ILQ620 V YWW H 68

www.vishay.com Vishay Revision: 01-Jan-2023 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED