IHD VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Document Number: 34016 For technical questions contact magnetics@vishay.com www.vishay.com Revision: 27-Feb-06 37 Filter Inductors High Current ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with no DC current Incremental Current: The typical current at which the inductance will be decreased by 5 % from its initial zero DC value Dielectric Rating: 2500 VRMS between winding and outer circumference to within 0.250" [6.35 mm] of the insulating sleeve edge Operating Temperature: - 55 °C to + 125 °C (no load) - 55 °C to + 85 °C (at full rated current) Current Rating: Maximum continuous Operating current (DC or RMS) based on a 40 °C temperature rise
FEATURES
- Printed circuit mounting (axial leads)
- Protected by polyolefin tubing
- High saturation bobbin used allowing high inductance with low DC resistance
- Pre-tinned leads
- High resistivity core offers ve ry high parallel resistance, resulting in maximum coil performance
- 20 sleeveless models available at reduced cost MECHANICAL SPECIFICATIONS Wire: Solid soft copper Terminals: 20 AWG tinned copper leads Coating: Polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, Class 3 requirements Core Material: Ferrite DIMENSIONS in inches [millimeters] MODEL A (Max.) B (Max.) STANDARD ELECTRICAL SPECIFICATIONS IND. at 1 kHz (µH) TOL. DCR MAX. (Ohms) RATED CURRENT (Max. Amps) INCREMENTAL CURRENT (Amps Approx.) IND. at 1 kHz (µH) TOL. DCR MAX. (Ohms) RATED CURRENT (Max. Amps) INCREMENTAL CURRENT (Amps Approx.) MODEL IHD-1 Min. Typ. 0.032 [0.813] Dia. Typ. A Dia. Max. #20 AWG RoHS COMPLIANT
Vishay Dale Filter Inductors www.vishay.com For technical questi ons contact magnetics@vishay.com Document Number: 34016 MODEL IHD-1 MODEL IHD-3 MARKING - Vishay Dale - Model - Value - Date code
ORDERING INFORMATION
IHD-1 3.9 µH ± 15 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD STANDARD ELECTRICAL SPECIFICATIONS IND. at 1 kHz (µH) TOL. DCR MAX. (Ohms) RATED CURRENT (Max. Amps) INCREMENTAL CURRENT (Amps Approx.) IND. at 1 kHz (µH) TOL. DCR MAX. (Ohms) RATED CURRENT (Max. Amps) INCREMENTAL CURRENT (Amps Approx.) GLOBAL PART NUMBER INFORMATION MODEL 1DHIR E PACKING CODE
3 R 9
L TOL.
Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.