IHB6EB103K VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Document Number: 34015 For tec hnical questions, contact: magnetics@vishay.com www.vishay.com Revision: 13-Apr-11 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Filter Inductors, High Current, Radial Leaded IHB Vishay Dale ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating co vering edge (with optional insulating covering) Current Rating: Maximum continuous operating current based on a + 50 °C temperature rise Operating Temperature: - 55 °C to + 130 °C (no load), - 55 °C to + 80 °C (at full rated current)
FEATURES
- Printed circuit mounting
- Wide range of inductance and current ratings
- Pre-tinned leads
- Optional polyolefin tubi ng and printing available at additional cost
- Compliant to RoHS Directive 2002/95/EC
- Halogen-free according to IEC 61249-2-21 definition MECHANICAL SPECIFICATIONS Terminals: Extensions of the winding wire, solder coated to within 0.063" [1.60 mm] of body Mounting: Center hole for mechanical mounting, insulated bushings recommended for center hole mounting Notes (1) E varies between components, see individual model specifications for details, tolerance of ± 0.035 (2) F varies between components, see individual model specifications for details DIMENSIONS in inches [millimeters] MODEL A (MAX.) B (MAX.) D (MIN.) STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA) APPROX. LEAD “E” SPACING MAXIMUM LEAD “F” DIAMETER F (2) D Dia. A Dia. E (1) B 0.500 ± 0.062 [12.70 ± 1.57]
www.vishay.com For technical questions, contact: magnetics@vishay.com Document Number: 34015
2 Revision: 13-Apr-11
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHB Vishay Dale Filter Inductors, High Current, Radial Leaded STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA) APPROX. LEAD “E” SPACING MAXIMUM LEAD “F” DIAMETER
Document Number: 34015 For tec hnical questions, contact: magnetics@vishay.com www.vishay.com Revision: 13-Apr-11 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHB Filter Inductors, High Current, Radial Leaded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA) APPROX. LEAD “E” SPACING MAXIMUM LEAD “F” DIAMETER
www.vishay.com For technical questions, contact: magnetics@vishay.com Document Number: 34015
4 Revision: 13-Apr-11
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHB Vishay Dale Filter Inductors, High Current, Radial Leaded STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA) APPROX. LEAD “E” SPACING MAXIMUM LEAD “F” DIAMETER
Document Number: 34015 For tec hnical questions, contact: magnetics@vishay.com www.vishay.com Revision: 13-Apr-11 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHB Filter Inductors, High Current, Radial Leaded Vishay Dale MARKING - Model - Value - Date code
ORDERING INFORMATION
IHB-1 10 μH ± 10 % EB e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER IH B1 E B 100 K MODEL PACKAGE CODE INDUCTANCE VALUE INDUCTANCE TOLERANCE STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. AT 1 kHz (μH) TOL. (%) DCR MAX. () RATED DC CURRENT (mA) APPROX. LEAD “E” SPACING MAXIMUM LEAD “F” DIAMETER
www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.