H5009-5012 INTERSIL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Switches Analog Signals Up to 20 Volts Peak-to-Peak
  • Each Channel Complete - Interfaces with Most Integrated Logic
  • Switching Speeds Less Than 0.5µs
  • I D(OFF) Less Than 500pA Typical at 70oC
  • Effective rDS(ON) - 5Ω to 50Ω
  • Commercial and Military Temperature Range Operation

Description

The IH5009 series of analog switches were designed to fill the need for an easy-to-use, inexpensive switch for both industrial and military applications. Although low cost is a primary design objective, performance and versatility have not been sacrificed. Each package contains up to four channels of analog gating and is designed to eliminate the need for an external driver. The odd numbered devices are designed to be driven directly from TTL open collector logic (15 volts) while the even numbered devices are driven directly from low level TTL logic (5 volts). Each channel simulates a SPDT switch. SPST switch action is obtained by leaving the diode cathode unconnected; for SPDT action, the cathode should be grounded (0V). The parts are intended for high performance multiplexing and commutating usage. A logic “0” turns the channel ON and a logic “1” turns the channel OFF . Part Number Information PART NUMBER CHANNELS LOGIC LEVEL PACKAGE PKG NO. IH5009 4 +15 DD, PD IH5010 4 +5 DD, PD IH5011 4 +15 DE, PE IH5012 4 +5 DE, PE IH5014 3 +5 DD, PD IH5016 3 +5 DE, PE IH5017 2 +15 PA IH5018 2 +5 DD, PA IH5019 2 +15 DE, PA IH5020 2 +5 DE, PA IH5022 1 +5 DD, PA IH5024 1 +5 PA NOTE: Mil-Temperature range (-55 oC to 125oC) available in ceramic packages only. IH50XX M DE PACKAGE PA - 8 LEAD PDIP PD - 14 LEAD PDIP PE - 16 LEAD PDIP DD - 14 LEAD CERDIP DE - 16 LEAD CERDIP TEMPERATURE RANGE M = MILITARY (-55oC to 125oC) C = COMMERCIAL (0 oC to 70oC) BASIC PART NUMBER May 1999 CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. Copyright © Harris Corporation 1999 IH5009-5012, 5014, 5016-5020, 5022, 5024 Virtual Ground Analog Switch File Number 3129.1 OBSOLETE PRODUCT NO RECOMMENDED REPLA CEMENT Call Central Applications 1-800-442-7747or email: centapp@harris.com

Functional Diagrams(Numbers in brackets refer to CERDIP Packages) IH5009, IH5010 (14 LEAD CERDIP, 14 LEAD PDIP) IH5011, IH5012 (16 LEAD CERDIP, 16 LEAD PDIP) IH5014 (14 LEAD CERDIP, 14 LEAD PDIP) IH5016 (16 LEAD CERDIP, 16 LEAD PDIP) IH5017 (8 LEAD PDIP) IH5018 (8 LEAD PDIP, 14 LEAD CERDIP) IH5019, IH5020 (8 LEAD PDIP, 16 LEAD CERDIP) IH5022 (8 LEAD PDIP, 14 LEAD CERDIP) IH5024 (8 LEAD PDIP) IH5009 Series

Absolute Maximum Ratings Thermal Information Operating Conditions Temperature Range CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: Dissipation rating assumes device is mounted with all leads welded or soldered to printed circuit board in ambient temperature below 75oC. For higher temperature, derate at rate of 5m/WoC. Electrical Specifications(Per Channel) PARAMETER (NOTE 1) SYMBOL (NOTE 4) TEST CONDITIONS (NOTE 2) TYPE -55oC (M) 0oC (C) MIN/MAX 25oC 125 oC(M) 70oC (C) MIN/MAX UNITSTYP MIN/MAX Input Current-ON I IN(ON) ALL V IN = 0V, ID = 2mA - 0.01 ±0.5 100 µA Input Current-OFF I IN(OFF) 5V Logic Ckts V IN = +4.5V, VA =±10V - 0.04 ±0.5 20 nA Input Current-OFF I IN(OFF) 15V Logic Ckts V IN = +11V, VA =±10V - 0.04 ±0.5 20 nA Channel Control Voltage-ON VIN(ON) 5V Logic Ckts Note 3 0.5 - 0.5 0.5 V Channel Control Voltage-ON VIN(ON) 15V Logic Ckts Note 3 1.5 - 1.5 1.5 V Channel Control Voltage-OFF VIN(OFF) 5V Logic Ckts Note 3 - - 4.5 4.5 V Channel Control Voltage-OFF VIN(OFF) 15V Logic Ckts Note 3 - - 11.0 11.0 V Leakage Current-OFF ID(OFF) 5V Logic Ckts V IN = +4.5V, VA =±10V - 0.02 ±0.5 20 nA Leakage Current-OFF ID(OFF) 15V Logic Ckts V IN = +11V, VA =±10V - 0.02 ±0.5 20 nA Leakage Current-ON I D(ON) 5V Logic Ckts V IN = 0V, IS = 1mA - 0.30 ±1.0 1000 (M) 200 (C) nA Leakage Current-ON I D(ON) 15V Logic Ckts V IN = 0V, IS = 1mA - 0.10 ±0.5 500 (M) 100 (C) nA Leakage Current-ON I D(ON) 5V Logic Ckts V IN = 0V, IS = 2mA - - 1.0 10 µA Leakage Current-ON I D(ON) 15V Logic Ckts V IN = 0V, IS = 2mA - - 2.0 100 µA Drain-Source ON-Resistance rDS(ON) 5V Logic Ckts I D = 2mA, VIN = 0.5V 150 90 150 385 (M) 240 (C) Ω Drain-Source ON-Resistance rDS(ON) 15V Logic Ckts I D = 2mA, VIN = 1.5V 100 80 100 250 (M) 160 (C) Ω Turn-ON Time t (ON) All - 150 500 - ns Turn-OFF Time t (OFF) All - 300 500 - ns Cross Talk CT All f = 100Hz - 120 - - dB NOTES: 1. (OFF) and (ON) subscript notation refers to the conduction state of the FET switch for the given test. 2. Refer to Figure 1 for definition of terms. 3. V IN(ON) and VIN(OFF) are test conditions guaranteed by the tests of rDS(ON) and ID(OFF) respectively. 4. “5V Logic CKTS” applies to even-numbered devices. “15V Logic CKTS” applies to odd-numbered devices. IH5009 Series