IGS-P9164 ORING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 IGS-P9164 Series *NOTE: This function is available by request only ▪ Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613 ▪ Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy ▪ Open-Ring support the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings ▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ Support IEEE 1588v2 clock Synchronization ▪ Support IPV6 new internet protocol version ▪ Support Modbus TCP protocol ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Support IEEE 802.3az Energy-Efficient Ethernet technology ▪ Support SMTP client and NTP server protocol ▪ Support IP-based bandwidth management ▪ Support application-based QoS management ▪ Support Device Binding security function ▪ Support DOS/DDOS auto prevention ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Support ACL, TACACS+ and 802.1x User Authentication for security ▪ Support 9.6K Bytes Jumbo Frame ▪ Support DBU-01 backup unit to quickly backup/restore configuration ▪ Multiple notification for warning of unexpected event ▪ Support DBU-01 backup unit device to quickly backup/restore configuration ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Support LLDP Protocol ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled
1Industrial Ethernet Switch www.oring-networking.com1-198 ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost- effectiveness in one set of network redundancy topology. ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. ▪ IEEE 1588 Technology : The IEEE 1588 technology can fulfill precision time synchronization requirements for protection and control applications. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more. Power Generation SCADA SCADA IGS-P9164 SCADA IGS-7084GCP IGS-7084GCPPLC PLC PLC O-Ring Control Center Control Center Control Center PLC IP Camera IGPS-1041GTPA IDS-5042 IGS-7084GCP IGS-7084GCP Transmission Distribution IMG-111 IDS-5011-WG Smart Metering Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 *NOTE: This function is available by request only
1-199Designed for Rugged Excellence Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Ethernet Switch ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Open-Vision Commander Topology View Dimensions IGS-P9164GC IGS-P9164GF IGS-P9164FX Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 (Unit=mm)
1Industrial Ethernet Switch www.oring-networking.com1-200 Technology Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) MAC Table 8K Packet Buffer 4Mbits Priority Queues 8 Processing Store-and-Forward Switch Properties Switching latency: 7 us Switching bandwidth: 40Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Jumbo frame Up to 9.6K Bytes Security Features Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Specifications ORing Switch Model IGS-P9164GF-MM IGS-P9164GFX-MM IGS-P9164GF-SS IGS-P9164GFX-SS IGS-P9164GC Physical Ports 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 16 Gigabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port - 4 Fiber Ports Specifications Fiber Ports Number 4 - Fiber Ports Standard 1000Base-SX 100Base-FX 1000Base-LX 100Base-FX - Fiber Mode Multi-mode Multi-mode Single-mode Single-mode - Fiber Diameter (µm) 62.5/125 µm 50/125 µm 62.5/125 µm 50/125 µm 9/125 µm 9/125 µm - Fiber Optical Connector SC SC SC SC - Typical Distance (km) 0.55 km 2 km 10 km 30 km - Wavelength (nm) 850 nm 1310 nm 1310 nm 1310 nm - Max. Output Optical Power (dBm) -4 dBm -14 dBm -3 dBm -8 dBm - Min. Output Optical Power (dBm) -9.5 dBm -23.5 dBm -9.5 dBm -15 dBm - Max. Input Optical Power (Saturation) 0 dBm 0 dBm -3 dBm 0 dBm - Min. Input Optical Power (Sensitivity) -18 dBm -31 dBm -20 dBm -34 dBm Link Budget (dB) 8.5 dB 7.5 dB 10.5 dB 19 dB - Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015
1-201Designed for Rugged Excellence Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Ethernet Switch Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP NTP server Network Redundancy O-Ring Open-Ring O-Chain MRP*NOTE Fast Recovery MSTP (RSTP/STP compatible) RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 LED Indicators Power Indicator(PWR) Green : Power LED x 3 Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. Fault Indicator(Fault) Amber : Indicate unexpected event occurred 10/100/1000Base-T(X) RJ45 Port Indicato Green for Link/Act indicator. Dual color LED for speed indicator : Green for 1000Mbps indicator / Amber for 100Mbps indicator / Off light for 10Mbps indicator 1000Base-X Fiber Port Indicator Green for port Link/Act.(for IGS-P9164GF series) 100Base-FX Fiber Port Indicator Green for port Link/Act.(for IGS-P9164GFX series) 100/1000Base-X SFP Port Indicator Green for port Link/Act. (for IGS-P9164GC series) Fault contact Relay Relay output to carry capacity of 1A at 24VDC on 3-pin terminal block Power Redundant Input Power L V model : Dual power inputs. 12~48VDC on 2-pin terminal block HV model : Dual power inputs. 85~264VAC/88~373VDC on 3-pin terminal block Power Consumption (Typ.) L V : 18Watts HV : 18.5Watts L V : 21Watts HV : 20.7Watts L V : 18Watts HV : 18.5Watts L V : 21Watts HV : 19.3Watts L V : 17Watts HV : 18Watts Overload Current Protection Present Reverse Polarity Protection Present Physical Characteristics Enclosure IP-30 Dimensions (W x D x H) 115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.3 x 6.06 inch) Weight (g) L V Model : 1780 g HV Model : 2216 g L V Model : 1769 g HV Model : 2205 g L V Model : 1780 g HV Model : 2216 g L V Model : 1769 g HV Model : 2205 g L V Model : 1750 g HV Model : 2186 G Environmental Storage Temperature -40 to 85 o C (-40 to 185 o Operating Temperature -40 to 75 o C (-40 to 167 o F ) Operating Humidity 5% to 95% Non-condensing Regulatory approvals Power Automation IEC 61850-3, IEEE 1613 EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) EMS EN61000-4-2 (ESD) EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 *NOTE: This function is available by request only
1Industrial Ethernet Switch www.oring-networking.com1-202 Available Model Model Name Description IGS-P9164FX-MM-SC-L V Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, low-voltage power inputs IGS-P9164FX-SS-SC-L V Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, low-voltage power inputs IGS-P9164FX-MM-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, US power cord IGS-P9164FX-MM-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, UK power cord IGS-P9164FX-MM-SC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164FX-MM-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164FX-SS-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, US power cord IGS-P9164FX-SS-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, UK power cord IGS-P9164FX-SS-SC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164FX-SS-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164GF-MM-SC-L V Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, low-voltage power inputs IGS-P9164GF-SS-SC-L V Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, low-voltage power inputs IGS-P9164GF-MM-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, US power cord IGS-P9164GF-MM-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, UK power cord IGS-P9 AABCC-FF-GG
Ordering Information
Code Definition 10/100/1000Base-T(X) Port Number Additional Port Number Additional Port Type Fiber Optical Mode Fiber Optical Connector Option - 16: 16 ports - 4: 4 ports - GF: 1000Base-X optical fiber port - FX: 100Base-FX optical fiber port - GC: Gigabit combo port - MM: Multi-mode - SS: Single-mode - SC: SC connector Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 MTBF L V:204,467 HV:300,460 L V:236,923 HV:300,460 L V:224,681 HV:281,040 L V:196,356 HV:238,082 L V:299,365 HV:408,521 Warranty 5 years
1-203Designed for Rugged Excellence Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Ethernet Switch Available Model Model Name Description IGS-P9164GF-MM-SC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164GF-MM-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164GF-SS-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, US power cord IGS-P9164GF-SS-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, UK power cord IGS-P9164GF-SS-SC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164GF-SS-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164GC-L V Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, low- voltage power inputs IGS-P9164GC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, high- voltage power inputs, US power cord IGS-P9164GC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, high- voltage power inputs, UK power cord IGS-P9164GC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, high- voltage power inputs, EU power cord IGS-P9164GC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, high- voltage power inputs, JP power cord Packing List ‧IGS-P9164GF(X) or GC x 1 ‧DIN-Rail Kit x 1 ‧AC power cord (for HV only) ‧ORing Tool CD x 1 ‧Wall-mount Kit x 2 ‧Quick Installation Guide x 1 ‧Console Cable x 1 Optional Accessories (Can be purchased separately) ‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices ‧DR-120 series : 120 Watts DIN-Rail power supply ‧DR-45 series : 45 Watts DIN-Rail power supply ‧DR-75 series : 75 Watts DIN-Rail power supply ‧DBU-01 : backup unit device Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015