IGS-9168GP ORING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a Jun, 2016 IGS-9168GP *NOTE: This function is available by request only
1Industrial Ethernet Switch www.oring-networking.com1-136 Optic Fiber CAT5e Serial IDS-5011-WGIP Camera IP Camera Control Cnter RGS-7244GP IGS-9168GP IGS-9168GP PLC PLC IP Camera IP Camera IAP-120 Product Line Product Line Product Line ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost- effectiveness in one set of network redundancy topology. ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. ▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control applications. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more. Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a Jun, 2016 *NOTE: This function is available by request only
1-137Designed for Rugged Excellence Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Ethernet Switch ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Open-Vision Commander Topology View Host Monitor Dimensions (Unit=mm) Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a Jun, 2016
1Industrial Ethernet Switch www.oring-networking.com1-138 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a Jun, 2016 ORing Switch Model IGS-9168GP Physical Ports 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 16 100/1000Base-X with SFP port 8 Technology Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) MAC Table 8K Priority Queues 8 Processing Store-and-Forward Switch Properties Switching latency: 7 us Switching bandwidth: 48Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Jumbo frame Up to 9.6K Bytes Security Features Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP NTP server Network Redundancy O-Ring Open-Ring O-Chain MRP*NOTE MSTP (RSTP/STP compatible) RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 (supported backup unit) LED Indicators Power Indicator(PWR) Green : Power LED x 2 Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. Fault Indicator(Fault) Amber : Indicate unexpected event occurred Specifications *NOTE: This function is available by request only
1-139Designed for Rugged Excellence Industrial Media Converter Industrial Device Server Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Ethernet Switch Available Model Model Name Description IGS-9168GP Industrial 24-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) ports and 8x100/1000Base-X, SFP socket Packing List ‧IGS-9168GP x 1 ‧DIN-Rail Kit x 1 ‧ORing Tool CD x 1 ‧Wall-mount Kit x 2 ‧Quick Installation Guide x 1 ‧Console Cable x 1 Optional Accessories (Can be purchased separately) ‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices ‧DR-45 series : 45 Watts DIN-Rail power supply ‧DR-120 series : 120 Watts DIN-Rail power supply ‧SFP100 series : 100Mbps SFP optical transceiver ‧SFP 1G series : 1Gbps SFP optical transceiver ‧DR-75 series : 75 Watts DIN-Rail power supply ‧DBU-01 : backup unit device IGS-9 AA B CC
Ordering Information
Code Definition 10/100/1000Base-T(X) Port Number Additional Port Number Additional Port Type Option - 16: 16 ports - 8: 8 ports -GP: Gigabit SFP ports Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v2.0a Jun, 2016 10/100/1000Base-T(X) RJ45 Port Indicator Green for Link/Act indicator. Dual color LED for speed indicator : Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps 100/1000Base-X SFP port Indicator Top green for port Link/Act. Fault Contact Relay Relay output to carry capacity of 1A at 24VDC Power Redundant Input Power Dual DC inputs. 12~48VDC on 6-pin terminal block (Max. rating is 60VDC on Rev.2) Power Consumption (Typ.) 20 Watts (Full loading) Overload Current Protection Present Reverse Polarity Protection Present Physical Characteristics Enclosure IP-30 Weight (g) 1265 g Environmental Storage Temperature -40 to 85°C (-40 to 185°F) Operating Temperature -40 to 75°C (-40 to 167°F) Operating Humidity 5% to 95% Non-condensing Regulatory Approvals EMI FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 MTBF 507660 hours Warranty 5years