IGP-28111J-22

IGP-28111J BOOKHAM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 17

Technical content

The Bookham IGP-28111J optical transceiver is a high performance, cost effective module for serial optical data communication applications up to 4.25Gb/s. The IGP-28111J is designed to accept DWDM SONET/SDH (with or without FEC) and Ethernet protocol traffic for 180km links. The product is designed for single mode fibre and operate at ITU wavelengths across the C- and L-band. The modules aid system hardware engineers in implementing low-cost DWDM solutions, which are protocol transparent. The “hot pluggable” feature built into every module reduces manufacturing and inventory costs allowing optical port upgrades at the customer premises. Built-in remote monitoring via digital diagnostics allows user access to static and dynamic data as well as module condition. The IGP-28111J uses the established Bookham Buried Heterostructure Directly Modulated Laser (BH DML) packaged in a compact cooled TOSA. The transmitter has full IEC60825- 1:2001 and CDRH Class I laser safety certification. The Bookham IGP-28111J module has been extensively tested utilizing industry standard single mode fibres in order to ensure compatibility with SONET-grade enterprise, access and metro systems. Additionally, all Bookham products are UL, CAN/CSA, FCC, IEC, and CDRH compliant. Features:

• 180km (3600ps/nm) transmission compliant to V-16.2
• DWDM SFP MSA compatible
• +4dBm optical power output
• 100GHz channel spacing
• C- and L-Band coverage
• Up to 4.25Gb/s data rate
• High accuracy thermal wavelength management
• Extended APD-based receiver sensitivity
• Typically 880mW power consumption
• Single +3.3V power supply
• 0°C to +70°C operating case temperature range
• Hot Pluggable
• Duplex LC connector
• Enhanced digital diagnostics
• Low EMI Compliance:
• CDRH & IEC Laser Safety
• FCC Class B EMI
• MIL-STD-883 ESD
• IEC/EN60950 Product Safety
• RoHS compliant Applications:
• OC-48/STM-16/OTN-1 DWDM Metro/Access Networks
• Ethernet IEEE 802.3ae
• Fibre channel
• Network Edge devices, µMSPP
• Subscriber Loop label SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications IGP-28111J

Parameter Symbol Min Max Unit Storage Temperature T STG -40 85 ºC Supply Voltage V CC -0.3 4.0 V Data AC Voltage Tx+, Tx- 2.4 V PP Data DC Voltage Tx+, Tx- -0.5 3.47 V Optical Input Received Power P IN +5 dBm Absolute Maximum Ratings Parameter Symbol Min Typical Max Unit Case temperature T CASE 0 70 °C Supply Voltage V CC 3.13 3.30 3.47 V Supply Current[1] ICC 265 418 mA Module Power Dissipation P 0.88 1.45 W In-rush Current[2] IIN-RUSH 100 mA Operating Conditions All specifications relate to End of Life (EOL) values over temperature and supply voltage, unless otherwise stated. Notes: [1] Supply current is shared between VCCTX and VCCRX. [2] In-rush is defined as current level above steady state current requirements. Transmitter Operating Specifications – Optical Parameter Symbol Value Units Notes Min Typical Max Data Rate BR 0.125 2.667 4.25 Gb/s ITU-T Center Wavelength λC 1530 1606 nm Refer to Table 6 & Table 7 for details Center Wavelength (SOL) λSOL λC – 0.05 λC – 0.02 λC nm Where λC is a defined ITU-T wavelength Wavelength Stability ∆λC λC – 0.1 λC λC +0.1 nm Optical Transmit Power P O +2 +4 dBm Modulated at 2.488Gb/s Optical Transmit Power P TX_DISABLE (disabled) -40 dBm Spectral Width ∆λ20 0.1 0.3 nm 20dB down from peak using 10pm RBW SMSR 40 dB Extinction Ratio ER 8.2 dB Filtered eye -1200 3600 ps/nm Modulated at 2.667Gb/s Dispersion Tolerance DT -1200 1600 ps/nm Modulated at 4.25Gb/s -1200 10000 ps/nm Modulated at 1.25Gb/s Dispersion Penalty DP 2 dB Jitter Generation (SOL) TJ RMS 10 mUI RMS Jitter Generation (SOL) TJ P-P 70 mUI Peak-to-Peak Output Optical Eye Compliant with Bellcore GR-253-CORE & ITU G.957 for SONET/SDH and with IEEE 802.3ae for Ethernet and Fibre Channel

All specifications relate to End of Life (EOL) values over temperature and supply voltage, unless otherwise stated. APD Receiver Operating Specifications – Optical Parameter Symbol Value Units Notes Min Typical Max Receiver Sensitivity -28 dBm Note 1, 8 (OSNR = 30dB) Rx SENS_1 -24 dBm Note 2, 8 -34 dBm Note 3, 8 Receiver Sensitivity (OSNR = 21dB) Rx SENS_2 -24 dBm Note 4, 8 Receiver Sensitivity (OSNR = 25dB) Rx SENS_3 -22 dBm Note 5, 8 Maximum -7 dBm Note 1 Input Power Rx OVERLOAD -9 dBm Note 5 -16 dBm Note 6 Input Operating Wavelength λRX 1260 1610 nm Note 7 Reflectance R RX -27 dB Loss of Signal - Asserted P A -40 -33 dBm Loss of Signal - Deasserted PD -31 dBm Hysteresis P A - PD 0.5 4 dB Notes: [1] Average power at 1 x 10 -12 BER and data rates of 125Mb/s to 2.667Gb/s. [2] Average power at 1 x 10 -12 BER and a data rate of 4.25Gb/s. [3] Average power at 1 x 10 -4 BER and a data rate of 2.667Gb/s. [4] Average power at 1 x 10-12 BER and a data rate of 2.667Gb/s over 180km fibr e. [5] Average power at 1 x 10-12 BER and a data rate of 4.25Gb/s over 80km fibr e. [6] Average power at 1 x 10 -10 BER and a data rate of 155.55Mb/s [7] Between 1260nm and 1520nm minimum receiver sensitivity is reduced by 2dB (-26dBm minimum). [8] ONSR measurements are made using an optical spectrum analyser with a resolution bandwidth of 0.1nm and an optical passband filter with a 3dB bandwidth of 1nm. Transmitter Operating Specifications – Electrical Parameter Symbol Value Units Notes Min Typical Max Data Rate BR 0.125 2.667 4.25 Gb/s Supply Voltage VCCTX 3.13 3.3 3.47 V PECL/CML Input V TXDIFF 500 1600 mV Differential pk-pk Note 1 Input Rise/Fall TR / TF 160 ps 20% - 80% Note 1 TX_DISABLE (asserted) V DH 2 3.47 V Input voltage high TX_DISABLE (negated) VDL -0.3 0.8 V Input voltage low TX_FAULT (asserted) V FH 2 3.47 V Output voltage high TX_FAULT ( negated) V FL -0.3 0.8 V Output voltage low Notes: [1] Test conditions: 100 Ω differential (from 100MHz to 2.5GHz); VTXDIFF = | (VTD+) – (VTD-) |.

APD Receiver Operating Specifications – Electrical Parameter Symbol Value Units Notes Min Typical Max Data Rate BR 0.125 2.667 4.25 Gb/s Supply Voltage V CC_TX 3.13 3.3 3.47 V Differential Output Swing V RXDIFF 370 2000 mV Differential pk-pk. Note 1 Rise/Fall Time T R / TF 140 ps 20% - 80% Note 1 Loss of Signal (Asserted) V OH 2 3.47 V Output Voltage High Loss of Signal (Negated) V OL -0.3 0.8 V Output Voltage Low Notes: [1] Test conditions: 100 Ω differential (from 100MHz to 2.5GHz); VRXDIFF = | (VRD+) – (VRD-) | Parameter Symbol Min Max Unit Notes Time from rising edge of TX_DISABLE Assert Time t_off 20 ms TX_DISABLE to when the optical output falls below 10% of nominal Time from falling edge of TX_DISABLE TX_DISABLE Negate Time t_on 20 ms to when the modulated optical output rises above 90% of nominal Time to initialize, including From negation of TX_FAULT/INT using reset of TX_FAULT t_init 300 ms TX_DISABLE Optical power going to 90% of final value From power on to negation of TX Startup time t_startup 90 s FAULT/INT, indicating laser temperature has stabilised to within operating range. TX_FAULT/INT Assert Time t_fault 50 ms Time from fault to TX_FAULT/INT on. TX_DISABLE to Reset t_reset 10 ms Time TX_DISABLE must be held high to reset TX_FAULT/INT LOS Assert Time t_los_on 100 us Time from LOS state to RX LOS assert LOS NegateTime t_los_off 100 us Time from non-LOS state to RX LOS deassert Serial ID Clock Rate f_serial_clock 100 kHz The DWDM SFP MSA document specifies the full details of the low speed electrical inter face in Section 3, including timings and both AC and DC requirements. Table 1: I/O Timing for Hardware Control and Status Functions. Low Speed Electrical Signal Timings

The following section demonstrates the typical systems level performance capabilities of the IGF-28111J DWDM SFP Transceiver. The enhanced performance and flexibility of the module is highlighted through operation at various data rates and optical signal to noise ratio (OSNR) levels. Systems Performance Capabilities Figure 1: Receiver Sensitivity for OC-48 Transmission over 0km to 300km (30dB OSNR).

Electrical Pin-out Details Figure 11: Diagram of Host Board Connector Block Pin Numbers and Names. Pin Number Name Function Plug Sequence

1 VEET Transmitter Ground 1

2 TX_FAULT/INT Transmitter Fault Indicator 3

3 TX_DISABLE Transmitter Disable 3

4 MOD-DEF(2) Module Definition 2 3

5 MOD-DEF(1) Module Definition 1 3

6 MOD-DEF(0) Module Definition 0 3

7 Tone in Not Implemented. See note. 3

8 LOS Loss of Signal 3

9 Tone out Not Implemented. See note. 1 10 V EER Receiver Ground 1

11 V EER Receiver Ground 1

12 RD- Inverted Received Data Out 3

13 RD+ Received Data Out 3

15 V CCR Receiver Power 2

16 V CCT Transmitter Power 2

17 VEET Transmitter Ground 1

18 TD+ Transmit Data In 3

19 TD- Inverted Transmit Data In 3

Table 2: Pin Definitions and Connection Sequence during Hot Plugging. Note: The DWDM MSA provisions for a supervisory tone via pin 7 and pin 9. However, the Bookham DWDM SFP does not currently support this option.

Figure 12: Mechanical outline drawing of DWDM SFP Transceiver.

Diagnostics specifications A digital diagnostics interface is available on Bookham SFP transceivers as a 2-wire serial interface and provides user access to module identification data, customer specific data, link type, static and dynamic monitors and a check code mechanism for verifying accuracy in the data registers. These static and dynamic diagnostics allow users to remotely and accurately identify modules and their vendors, enquire about its compatibility with the system and also verify which enhanced diagnostics are supported. The user can also monitor module parameters to determine the module and link condition and provide hardware alerts upon an alarm or warning event. The Enhanced Digital Diagnostics provide real-time monitoring of receiver input power, transmitter power, internal module temperature, laser bias current and supply voltage parameters. The 2-wire serial interface is defined by the GBIC (GigaBit Interface Conver ter) specification and the SFP MSA (Multi-Source Agreement) document dated September 14th, 2000. It is also compliant with the proposed DWDM SFP MSA Document. This inter face allows r ead-only access to two separate memory locations starting at 1010000X (A0h) and 101000X (A2h). Table 3 and Table 4 contain address descriptions and r egister mapping information for both memory locations. The memory location starting at A0h (data address 0 ~ 128) contains the Serial ID fields. This is a static data memory location for details such as vendor information, module identification, user specific data and a check code for verifying accuracy in the data registers. The memory location starting at A2h (data address 0 ~ 255) contains Enhanced Diagnostics fields. The Enhanced Diagnostics are based on the SFF-8472 specification developed in the SFF (Small For m Factor) standards organization with an added TX_FAULT interrupt feature that provides a hardware alert upon reaching an alarm or warning condition on any, or all, of the diagnostics monitors. Enhanced Diagnostics provide a real-time indication of system and module condition, alerting the user to apparent or pending link or module problems. This is implemented through the use of alarm and warning registers that are updated approximately every 60 milliseconds. Data from these registers are internally calibrated over the specified operating ranges as described in this data sheet. Alarm and warning thresholds are factory preset values and ar e interpreted as r eal 16 bit data. The optional TX_FAULT interrupt feature, if activated, pulls the TX_FAULT pin (pin 2) high upon reaching an alarm or warning condition on the diagnostics monitors mentioned above. The masking feature allows any of the warning and alarm flags to be dynamically masked by the user.

Data Address Field Size Bookham Module Name of Field Description of Field (dec) (Bytes) Data (hex) 0 1 0Bh Identifier Type of serial transceiver 1 1 27h Ext. Identifier Extended identifier of type of serial transceiver 2 1 07h Connector Code for connector type 3-10 8 00h,0Ch,44h,00h, Transceiver Code for electronic compatibility 80h,10h,01h,00h or optical compatibility 11 1 03h Encoding Code for serial encoding algorithm 12 1 19h BR, Nominal Nominal bit rate, units of 100 MBits/sec 13-14 2 B4h Length (9µm) – km Link length supported for 9/125µm fiber, units in km 15 1 46h Max Temp Maximum operating case temperature in °C 16 1 00h Min Temp Minimum operating case temperature in °C 17 1 5Fh Max Supply Maximum supply current in units of 4mA Current 18 1 - Reserved - 19 1 41h Channel spacing Channel spacing compatibility and number and tuning of ITU channels supported 20-35 16 42h,4Fh,4Fh, Vendor Name SFP transceiver vendor name (ASCII) 4Bh,48h,41h,4Dh 36 1 Module dependent Optional Optional DWDM features (not currently Features supported by Bookham) 37-39 3 00h 09h A6h Vendor OUI SFP transceiver vendor IEEE company ID 40-55 16 Module dependent Vendor PN Part number provided by SFP transceiver vendor (ASCII) 56-59 4 03h Vendor Rev Revision level for part number provided by vendor (ASCII) 60-61 2 Module dependent Wavelength Laser wavelength (in nm) 62 1 Module dependent Wavelength Laser wavelength (fractional part in units of 10pm) 63 1 Module dependent CC_BASE Check code for Base ID Fields (addresses 0 – 62) 64-65 2 1Ah Options Indicates which optional transceiver signals are implemented 66 1 46h BR, max Upper bit rate margin, units in % 67 1 5Eh BR, min Lower bit rate margin, units in % 68-83 16 Module dependent Vendor SN Serial number provided by vendor (ASCII) 84-91 8 Module dependent Date Code Vendor’s manufacturing date code 92 1 68h Diagnostics Indicates the type of diagnostics implemented in Monitoring Type the transceiver 93 1 F0h Enhanced Indicates which optional enhanced features Options are implemented 94 1 01h SFF-8472 Indicates which revision of SFF-8472 the Compliance transceiver complies with 95 1 Module dependent CC_EXT Check code for the Extended ID Fields (addresses 64-94) 96-127 32 - Vendor Vendor Specific EEPROM (Vendor specific data; Specific read only) 128-255 128 - Reserved Reserved for future use Table 3: DWDM SFP MSA Serial Identification Data Fields (Location A0h).

Data Address Field Size Name of Field Description of Field (dec) (Bytes) A/D Table for Alarm and Warning Thresholds 00-55 56 High/Low Alarm and Specifies factory preset alarm and warning thresholds Warning Levels defined in Table 5. Calibration Constants for External Calibration Option 56-94 39 Unused in DWDM devices. All Bytes Set to 0. 95 1 Checksum Low order 8 bits of the sum of bytes 0-94 A/D Values and Status Bits 96-109 8 A/D Values Real-time A/D binary values of the following enhanced diagnostics: module temperature, supply voltage, laser bias current, transmit optical power, receive optical power, laser temperature and TEC current. These values are Internally calibrated absolute measurements. All diagnostic parameters implemented in these address locations have a corresponding high and low, alarm and warning thresholds assigned in address locations 00-55. Optional Status/Control Bits 110 1 Soft Control Signals “Soft” control signals monitored over the 2-wire access port. Continuously updated real-time status of the following control signals: TX_FAULT, TX_DISABLE, Rate Select, and LOS. Last bit (LSB) indicates transceiver readiness to transmit data. 111 1 Reserved Reserved Reserved Optional Alarm and Warning Flag Bits 112-117 5 Alarm & Warning Flags Real time, single point bits indicating module parameters that are approaching or outside normal operating limits. Parameters monitored are: module temperature, supply voltage, laser bias current, transmit optical power, receive optical power, laser temperature and TEC current. The flags are internally calibrated thresholds with limits corresponding to levels detailed in addresses 00-39 above. 118-119 2 Warning Mask Masking bits corresponding to Warning bits of bytes 116 and 117 respectively Vendor Specific Memory Addresses 120-126 8 Vendor Specific Vendor specific data Table Select Byte (2-wire Address A2h) 127 1 Table Select The byte value defines the Table location for subsequent reads and writes to bytes locations 128-255 User EEPROM 128-247 120 User EEPROM User writable EEPROM 248-255 8 Vendor Specific Vendor specific control functions Table 4: Enhanced Digital Diagnostics Data Fields (Location A2h). Table 5: Alarm and Warning Thresholds. Address Value Description 00-01 85 ºC Temp High Alarm 02-03 -10 ºC Temp Low Alarm 04-05 80 ºC Temp High Warning 06-07 -5 ºC Temp Low Warning 08-09 3.63 V VCC High Alarm 10-11 2.97 V VCC Low Alarm 12-13 3.47 V VCC High Warning 14-15 3.14 V VCC Low Warning 16-17 70 mA Bias High Alarm 18-19 10 mA Bias Low Alarm 20-21 55 mA Bias High Warning 22-23 15 mA Bias Low Warning 24-25 3162µW Tx Power High Alarm 26-27 1259µW Tx Power Low Alarm Address Value Description 28-29 2512µW Tx Power High Warning 30-31 1585µW Tx Power Low Warning 32-33 200µW Rx Power High Alarm 34-35 0.794µW Rx Power Low Alarm 36-37 126µW Rx Power High Warning 38-39 1.585µW Rx Power Low Warning 40-41 60 ºC Laser Temp High Alarm 42-43 30 ºC Laser Temp Low Alarm 44-45 55 ºC Laser Temp High Warning 46-47 35 ºC Laser Temp Low Warning 48-49 600 mA TEC Current High Alarm 50-51 -600 mA TEC Current Low Alarm 52-53 400 mA TEC Current High Warning 54-55 -400 mA TEC Current Low Warning

It is important to note that single mode optics, as with all optical devices are susceptible to contamination from air borne particles, human body oils, and mating connector par ticles. Care should be taken to protect all exposed optical interfaces with process plugs and dust covers. All Bookham IGP-2000 SFP products are supplied with a process plug. This plug protects the transceiver’s optics during standard handling and manufacturing processes. It is recommended that the process plug remain in the transceiver whenever an optical fibre connector is not inserted. ESD Discharge (ESD) Normal ESD precautions are required during the handling of this module. This transceiver is shipped in ESD protective packaging and it should not be removed from its packaging or otherwise handled unless in an ESD protected environment utilizing standard grounded benches, floor mats, and wrist straps. Eye Safety The Bookham IGP-2000 Series SFP products are Class I laser products per IEC/EN60950-1:2001 and 60825-1:2001, and are certified per CDRH, 21 CFR 1040, Laser Safety Requirements. It is an eye safe device when operated within the limits of this specification. Operating this product in a manner inconsistent with intended usage and specification may r esult in hazardous radiation exposure. Tampering with this laser based product may warrant, under law, re-certification of the modified product as required by the U.S. Food and Drug Administration (21 CFR 1040). 1. DWDM SFP MSA (MultiSource Agreement), Revision 1.0, 19th September 2005. 2. SFP MSA (MultiSource Agreement), 14th September 2000. 3. Digital Diagnostics Monitoring Interface for Optical Transceivers. SFF Document Number SFF-8472, Rev 9.5. 4. Telcordia GR-253-CORE. 5. ITU G.957. 6. IEEE 802.3ae, 2000 Edition. Feature Agency Standard Certificate / Comments FDA/CDRH CDRH 21J CFR1040.10 Pass. Accession no. 0522631-00 Laser Safety TUV IEC/EN60825-1:2001 US-TUVR-3209 CAN/CSA-60825-1-03 CU7206220601 UL60950-1:2001 CU7206220601 Product Safety TUV CAN/CSA-C22.2 No.60950-1-03 CU7206220601 IEC/EN60950-1:2001 US-TUVR-3209 EMC FCC Title 47, Part 15, 1-12.5 GHz, Class B Pass Bookham IGP-28111J SFP transceiver is designed to be Class I Laser safety compliant and is certified per the following standards: Regulatory Compliance Package and Handling Instructions Related Documents RoHS Compliance Bookham is fully committed to environment protection and sustainable development and has set in place a compr ehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details.

The specific product order codes for each ITU-T 100GHz channel available are defined below in Table 6 for C-Band and Table 7 for L-Band.

Ordering information

Product Frequency Wavelength Code (THz) (nm) IGP-28111J-60 196.00 1529.55 IGP-28111J-59 195.90 1530.33 IGP-28111J-58 195.80 1531.12 IGP-28111J-57 195.70 1531.90 IGP-28111J-56 195.60 1532.68 IGP-28111J-55 195.50 1533.47 IGP-28111J-54 195.40 1534.25 IGP-28111J-53 195.30 1535.04 IGP-28111J-52 195.20 1535.82 IGP-28111J-51 195.10 1536.61 IGP-28111J-50 195.00 1537.40 IGP-28111J-49 194.90 1538.19 IGP-28111J-48 194.80 1538.98 IGP-28111J-47 194.70 1539.77 IGP-28111J-46 194.60 1540.56 IGP-28111J-45 194.50 1541.35 IGP-28111J-44 194.40 1542.14 IGP-28111J-43 194.30 1542.94 IGP-28111J-42 194.20 1543.73 IGP-28111J-41 194.10 1544.53 IGP-28111J-40 194.00 1545.32 IGP-28111J-39 193.90 1546.12 IGP-28111J-38 193.80 1546.92 Product Frequency Wavelength Code (THz) (nm) IGP-28111J-37 193.70 1547.72 IGP-28111J-36 193.60 1548.51 IGP-28111J-35 193.50 1549.32 IGP-28111J-34 193.40 1550.12 IGP-28111J-33 193.30 1550.92 IGP-28111J-32 193.20 1551.72 IGP-28111J-31 193.10 1552.52 IGP-28111J-30 193.00 1553.33 IGP-28111J-29 192.90 1554.13 IGP-28111J-28 192.80 1554.94 IGP-28111J-27 192.70 1555.75 IGP-28111J-26 192.60 1556.55 IGP-28111J-25 192.50 1557.36 IGP-28111J-24 192.40 1558.17 IGP-28111J-23 192.30 1558.98 IGP-28111J-22 192.20 1559.79 IGP-28111J-21 192.10 1560.61 IGP-28111J-20 192.00 1561.42 IGP-28111J-19 191.90 1562.23 IGP-28111J-18 191.80 1563.05 IGP-28111J-17 191.70 1563.86 IGP-28111J-16 191.60 1564.68 Table 6: IGP-28111J Product Order Codes for C-Band Wavelengths.

17 BH12884 Rev 2.0 January 2007 ©Bookham 2005. Bookham is a registered trademark of Bookham Inc. Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Bookham before they become applicable to any particular order or contract. In accordance with the Bookham policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of Bookham or others. Fur ther details are available from any Bookham sales representative. Contact Information North America Bookham Worldwide Headquarters 2584 Junction Ave. San Jose CA 95134 USA

• Tel: +1 408 919 1500
• Fax: +1 408 919 6083 www.bookham.com sales@bookham.com Europe Paignton Office Brixham Road Paignton Devon TQ4 7BE United Kingdom
• Tel: +44 (0) 1803 66 2000
• Fax: +44 (0) 1803 66 2801 Asia Shenzhen Office

2 Phoenix Road

• Tel: +86 755 33305888
• Fax: +86 755 33305805 +86 755 33305807 Product Frequency Wavelength Code (THz) (nm) IGP-28111J-09 190.90 1570.42 IGP-28111J-08 190.80 1571.24 IGP-28111J-07 190.70 1572.06 IGP-28111J-06 190.60 1572.89 IGP-28111J-05 190.50 1573.71 IGP-28111J-04 190.40 1574.54 IGP-28111J-03 190.30 1575.37 IGP-28111J-02 190.20 1576.20 IGP-28111J-01 190.10 1577.03 IGP-28111J-00 190.00 1577.86 IGP-28111J-99 189.90 1578.69 IGP-28111J-98 189.80 1579.52 IGP-28111J-97 189.70 1580.35 IGP-28111J-96 189.60 1581.18 IGP-28111J-95 189.50 1582.02 IGP-28111J-94 189.40 1582.85 IGP-28111J-93 189.30 1583.69 IGP-28111J-92 189.20 1584.53 IGP-28111J-91 189.10 1585.37 IGP-28111J-90 189.00 1586.20 IGP-28111J-89 188.90 1587.04 IGP-28111J-88 188.80 1587.88 Product Frequency Wavelength Code (THz) (nm) IGP-28111J-87 188.70 1588.73 IGP-28111J-86 188.60 1589.57 IGP-28111J-85 188.50 1590.41 IGP-28111J-84 188.40 1591.26 IGP-28111J-83 188.30 1592.10 IGP-28111J-82 188.20 1592.95 IGP-28111J-81 188.10 1593.79 IGP-28111J-80 188.00 1594.64 IGP-28111J-79 187.90 1595.49 IGP-28111J-78 187.80 1596.34 IGP-28111J-77 187.70 1597.19 IGP-28111J-76 187.60 1598.04 IGP-28111J-75 187.50 1598.89 IGP-28111J-74 187.40 1599.75 IGP-28111J-73 187.30 1600.60 IGP-28111J-72 187.20 1601.46 IGP-28111J-71 187.10 1602.31 IGP-28111J-70 187.00 1603.17 IGP-28111J-69 186.90 1604.03 IGP-28111J-68 186.80 1604.89 IGP-28111J-67 186.70 1605.74 IGP-28111J-66 186.60 1606.61 Table 7: IGP-28111J Product Order Codes for L-Band Wavelengths.