IGF-17311J BOOKHAM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
The Bookham IGF Series optical transceiver modules are high-performance, cost-effective modules for serial optical data communication applications at 10Gb/s. They are designed to provide 10Gb/s Ethernet and 10Gb/s Fiber Channel 10 km compliant links. The modules are designed for single mode fiber and operate at a nominal wavelength of 1310nm. They incorporate Bookham’s exclusive optical packaging platform. The modules aid system har dware engineers in implementing low-cost single mode Physical Media Dependency (PMD) solutions that are protocol transparent. The “hot pluggable” feature built into every module reduces manufacturing cost, inventory costs and allows optical port upgrades at the customer pr emises. Built-in remote monitoring via digital diagnostics allows user access to static and dynamic data as well as module condition. The IGF-17311J uses a DFB laser packaged in conjunction with an optical isolator. This design provides for maximum eye opening, minimized jitter generation, and excellent back reflection performance. The transmitter is fully EN/IEC60825-1 Class 1/Class I laser eye safety compliant. Features:
- Multi-Protocol support: IEEE 802.3ae 10G Ethernet 10GBASE-LR/LW 10G Fibre Channel 1200-SM-LL-L
- Compliant with the XFP
- 9.95 to 10.52 Gb/s data rates
- Supports 10km link distances
- Hot Pluggable
- Low EMI for high port density
- 2.2W Typical Power Dissipation
- On board Enhanced Digital Diagnostics providing I2C remote monitoring capability
- XFI Loop-Back Diagnostic
- Integral Signal Conditioning ICs enabling FR4 host board PCB traces up to 8 inches
- Duplex LC connector
- Transmit disable and loss-of-signal functions
- RoHS compliant Applications:
- High Port Density Solutions
- 10GBASE-L applications
- 10Gb/s Gigabit Ethernet Networking
- Datacom and Storage-area networking
- Rack-to-rack connectivity
- Client side interconnection
- Fiber to the X aggregation XFP Optical Transceivers for 10km 10G Datacom and Storage Applications IGF Series IGF-17311J
Parameter Symbol Min Max Units Storage Temp T stg -40 85 °C Supply voltage 5 VCC5 06 V Supply voltage 3 VCC3 0 4.0 V Supply voltage2 VCC2 1.8V Not required V Supply voltage E5 VEE5 -5.2V Not required V Data AC volt. differential Tx+, Tx- -0.5 2 Vpp Data DC volt Tx+, Tx- 0 VCC2 Vpp Receiver Input Damage Threshold 5 dBm Recommended operating conditions Parameter Symbol Min Typ Max Units Notes Baud rate 9.95 10.52 GBd 10 GbE; 10G FC Supply voltage5 VCC5 4.75 5.0 5.25 V +/- 5% Supply current5 ICC5 275 400 mA Supply voltage3 VCC3 3.13 3.3 3.47 V +/- 5% Supply current3 ICC3 255 300 mA Supply voltage2 VCC2 1.8 V Not required Supply voltage E5 VEE5 -5.2 V Not required Power dissipation Pw 2.2 2.7 W Temperature case Ts 1 0 70 °C Please contact sales for special requirements PDamage
Operating Specifications – electrical Parameter Symbol Value Units Notes Min Typical Max CML input (differential) V TxDiff 125 940 mVpp 100 ohm differential CML output (differential) V RxDiff 360 770 mVpp 100 ohm differential Rise/Fall time T r/Tf 24 Ps 20% - 80% Low Speed Electrical Signals Output voltage high V OH VCC3-0.5 VCC3+0.3 V RX_LOS, MOD_NR, Interrupt Output voltage low V OL 0 0.4 Input voltage high V IH 2 VCC3+0.3 V TX_DIS, P_Down/RST Input voltage low V IL 0 0.8 Loss of signal timing Assert (off to on) T A 100 µs Deassert (on to off) T D 100 µs Transmitter operating specifications – optical Parameter Symbol Value Units Notes Min Typical Max Center wavelength λ c 1260 1310 1355 nm Optical transmit power P o -6.0 0.5 dBm EOL Transmitter Optical OMA -5.2 dBm Modulation Amplitude Transmitter power (in OMA) - TDP -6.2 dBm Side mode suppression SMSR 30 dB Extinction ratio ER 3.5 dB Transmitter and dispersion penalty TDP 3.2 dB 10km SMF TX disabled output power P OFF -30 dBm Output optical eye Compliant with IEEE 802.3æ clause 52
Receiver operating specifications – optical Parameter Symbol Value Units Notes Min Typical Max Input operating wavelength λ 1260 1360 nm Receiver sensitivity P IN-MIN -17 dBm Ave. power at ER=6dB Receiver sensitivity in OMA P IN-OMA -12.6 dBm Stressed receiver sensitivity in OMA SRS -10.3 dBm Receiver overload P IN-MAX 0.5 dBm Ave. power Reflectance -12 dB Loss of Signal Loss of Signal Assert (Off to On) P A -32 -20 dBm Loss of Signal Deassert (On to Off) P D -15 dBm Hysteresis P A - PD 0.5 6 dB
1 GND
2 VEE5
3 Mod_Desel
5 TX_DIS
6 VCC5
7 GND
8 VCC3
9 VCC3
10 SCL
11 SDA
12 Mod_Abs
13 Mod_NR
14 Rx_LOS
15 GND
Rx_LOS 14 Mod_NR 13 Mod_Abs 12 SDA 11 SCL 10 VCC3 9 VCC3 8 GND 7 VCC5 6 TX_DIS 5 Mod_Desel 3 VEE5 2 GND 1 Interrupt 4 TD+ 29 TD- 28 GND 27 GND 26 RefCLK- 25 RefCLK+ 24 GND 23 VCC2 22 P_down/RST 21 VCC2 20 GND 19 RD+ 18 RD- 17 GND 16
4 Interrupt
16 GND
17 RD-
18 RD+
19 GND
20 VCC2
21 P_down/RST
22 VCC2
23 GND
24 RefCLK+
25 RefCLK-
26 GND
27 GND
28 TD-
29 TD+
30 GND
Figure 1: XFP Module Board Pinout & Names Top of Board Figure 2: Host PCB XFP Pinout Top View
Pin # Logic Symbol Function Plug Seq Notes
1 GND Module Ground; Signal Ground 1 1
2 VEE5 Optional -5.2V Power Supply—NOT USED 2
3 LVTTL-I Mod_Desel Module De-select; When held low by host allows the
module to respond to 2-wire serial interface commands 3
4 LVTTL-O Interrupt Interrupt_BAR; Indicates the presence of an important
condition that can be read over the two wire interface 32
5 LVTTL-I TX_DIS Transmitter Disable; Turns Off Transmitter Laser Source 3
6 VCC5 +5 V Power Supply 2
7 GND Module Ground; Signal Ground 1 1
8 VCC3 +3.3 V Power Supply 2 9 VCC3 +3.3 V Power Supply 2
10 LVTTL-I SCA Two Wire Interface Clock 3 2
11 LVTTL-I/O SDA Two Wire Interface Data Line 3 2
12 LVTTL-O Mod_Abs Indicates Module Not Present; Grounded in Module 3 2
13 LVTTL-O Mod_NR Module Not ready or Indicating Module Operational Fault 3 2
14 LVTTL-O RX_LOS Receiver Loss of Signal Indicator 3 2
15 GND Module Ground; Signal Ground 1 1
16 GND Module Ground; Signal Ground 1 1
17 CML-O RD- Receiver Inverted Data Output 3
18 CML-O RD+ Receiver Non-Inverted Data Output 3
19 GND Module Ground; Signal Ground 1 1
20 VCC2 +1.8 V Power Supply 2 Power down; When high, places the module in the low power standby mode of less than 1.5 W with 2-wire 21 LVTTL-I P_down/RST interface still operational. 3 Reset; The falling edge of P_Down/RST initiates a complete module reset including the 2-wire interface. 22 VCC2 +1.8 V Power Supply 2
23 GND Module Ground; Signal Ground 1 1
24 PECL-I RefCLK+ Reference Clock Non-Inverted Input, AC coupled on Host Board 3
25 PECL-I RefCLK- Reference Clock Inverted Input, AC coupled on Host Board 3
26 GND Module Ground; Signal Ground 1 1
27 GND Module Ground; Signal Ground 1 1
28 CML-I TD- Transmitter Inverted Data Input 3
29 CML-I TD+ Transmitter Non-Inverted Data Input 3
30 GND Module Ground; Signal Ground 1 1
Notes: 1. Module ground pins are isolated from the module case and chassis ground within the module.
Figure 7. Interface Design with Bezel (mm) that allows read-only access to separate memory locations. contains the Digital Diagnostic Functions. control functions that must be accessed repeatedly.
- Table 01h: Serial ID EEPROM
- Table 02h: User writable EEPROM The details of each memor y space are found in the XFP MSA specification Chapter 5. Reference Documents: 1. XFP MSA revision 4.0 found at www.xfpmsa.org; April 13, 2004
Bookham IGF-17311J 1310nm XFP transceivers are designed to be Class I Laser compliant. They are certified per the following standards: Feature Agency Standard Certificate/Comments FDA/CDRH CDHR 21(J) CFR 1040.10 0212646-01 IEC/EN 60950-1:2001 IEC/EN 60825-1/A2:2001 CAN/CSA-60825-1-03 U8V 06 06 54880 002 UL 60950-1:2003 Product Safety UL/CSA UL 94 V-0 CAN/CSA-C22.2 No.60950-1-03 MIL-STD 883 Method 3015 IEC61000-4-2 Part 15 Class B Pass EN55022, EN55024 Class B 73/23/EEC (Low voltage) 89/336/EEC (EMC) Laser Safety ESD EMI CE TÜV IEC EU Directive FCC/89/336/EE [EU Directive] Pass U8V 06 06 54880 002 DE3-54632 Pass Pass
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Bookham before they become applicable to any particular order or contract. In accordance with the Bookham policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of Bookham or others. Further details are available from any Bookham sales representative. Contact Information BH13280 Rev 1.0 January 2007 ©Bookham 2005. Bookham is a registered trademark of Bookham Inc. North America Bookham Worldwide Headquarters 2584 Junction Ave. San Jose CA 95134 USA
- Tel: +1 408 919 1500
- Fax: +1 408 919 6083 www.bookham.com sales@bookham.com Europe Paignton Office Brixham Road Paignton Devon TQ4 7BE United Kingdom
- Tel: +44 (0) 1803 66 2000
- Fax: +44 (0) 1803 66 2801 Asia Shenzhen Office
2 Phoenix Road
- Tel: +86 755 33305888
- Fax: +86 755 33305805 +86 755 33305807 Ordering Information: IGF-17311J TRX 10G XFP 10KM SR GBE COM ROHS 5/6 RoHS Compliance Bookham is fully committed to environment protection and sustainable development and has set in place a comprehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details.