IEC-1000 LVL1 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment - ISA 12.12.01 (UL1604) Class I, Division 2 Classi/f_ied for use in hazardous locations with DC Terminal Block power - DIP switch con/f_iguration for "Link-Fault-Pass-Through, " link down alarm, speed, duplex mode - 128K bits buffer memory - 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Full wire-speed forwarding rate - Alarms for power and port link failure by relay output - -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) - IP30 aluminum case - Supports DIN-rail mounting installation Safety Complies with NEMA (National Manufacturers Association) TS1 & TS2 Environmental certi/f_ied for the Traffic Control Equipment that withstand extreme temperatures, operating voltage and humidity /f_luctuation, vibration and shock commonly experienced in severe outdoor environments. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. IEC-1000 Diagrams Unit: mm Side ButtomBack TopFront FAULT GND PWR2 PWR1 GND 135 110 DC TERMINAL BLOCK

IEC-1000 - 10/100 Industrial Media Converter, SC MM 2KM -40 to 75C Speci/f_ications Package Contents IEC-1000 Quick Installation Guide www.level1.com one world_one brand_one level_ Technology Standards IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x Forward and Filtering Rate 14,880pps for 10Mbps 148,810pps for 100Mbps Packet Buffer Memory 128K bits Processing Type Store-and-Forward Half-duplex back-pressure and IEEE802.3x full-duplex flow control Environment Operating Temperature -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety Hazardous locations: Class 1, Division 2 group A,B,C&D UL60950-1, EN60950-1, IEC60950-1 EMI FCC Part 15, Class A EN61000-6-3 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV Air: + / - 8KV - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line D.C. Power Ports: + / - 0.5KV; Line-to-earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/ Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) FED STD 101C Method 5007.1 (Free fall w/ package) -Tested with Cross Weight and Drop High standard table NEMA TS1/2 Environmental requirements for traffic control equipment Power Input Input Voltage: 10 to 48VDC (DC Terminal Block) or 12VDC (DC Jack , optional) Power Consumption 4.32W MAX. 0.36A @ 12VDC, 0.09A @ 48VDC Overload Current Protection Present Reverse Polarity Protection Present Mechanical Casing Aluminum case IP30 Dimensions 50mm (W) x 110mm (D) x 135mm (H) Weight 0.8Kg (1.76lbs.) Installation DIN-Rail (Top hat type 35mm) MTBF 104.02 years Interface Ethernet Port 10/100BASE-TX: 1 port 100BASE-FX: 1 port LED Indicators Per Unit: Power Status (Power 1, Power 2, Fault), Link-Fault-Pass-Through Per Port: 10/100TX: Link/Activity, Full-duplex/Collision, Speed 100FX: Link/Activity, Full-duplex/Collision Relay Contact Relay contact rating with current 1A @ 30VDC, 0.5A @ 120VAC