IDT2305NZT RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

COMMERCIAL TEMPERATURE RANGE IDT2305NZT 2.5V CLOCK BUFFER JANUARY 2012 DSC 7020/4 INDUSTRIAL TEMPERATURE RANGE The IDT logo is a registered trademark of Integrated Device Technology, Inc. FEATURES:

  • Clock Distribution
  • 10MHz to 133MHz operating frequency
  • Distributes one clock input to one bank of five outputs
  • Output Skew < 250ps
  • No external RC network required
  • Operates at 2.5V VDD
  • Available in SOIC package
  • Available in commercial and industrial temperature range FUNCTIONAL BLOCK DIAGRAM IDT2305NZT2.5V CLOCK BUFFER C LK1 CLK2 CLK3 CLK4 Control L ogicREF 1 CLKOUT DESCRIPTION: The IDT2305NZT is a high-speed clock buffer, designed to address high-speed clock distribution applications. IDT2305NZT accepts one reference input, and drives out five low skew clocks.

COMMERCIAL TEMPERATURE RANGE IDT2305NZT 2.5V CLOCK BUFFER REF CLK1 CLK2 GND CLKOUT CLK4 VDD CLK3 PIN CONFIGURATION SOIC TOP VIEW Symbol Rating Max. Unit VDD Supply Voltage Range –0.5 to +4.6 V VI (2) Input Voltage Range (REF) –0.5 to +5.5 V VI Input Voltage Range –0.5 to V (except REF) VDD+0.5 IIK (VI < 0) Input Clamp Current –50 mA IO (VO = 0 to VDD) Continuous Output Current ±50 mA VDD or GND Continuous Current ±100 mA TA = 55°C Maximum Power Dissipation 0.7 W (in still air)(3) TSTG Storage Temperature Range –65 to +150 °C Operating Industrial Temperature -40 to +85 °C Temperature Range NOTES: 1. Weak pull down. 2. Weak pull down on all outputs. PIN DESCRIPTION ABSOLUTE MAXIMUM RATINGS(1) APPLICATIONS:

  • SDRAM
  • Telecom
  • Datacom
  • PC Motherboards/Workstations
  • Critical Path Delay Designs Pin Name Pin Number Type Functional Description REF(1) 1 IN Input reference clock, 3.3V tolerant input CLK2(2) 2 OUT Output clock CLK1(2) 3 OUT Output clock GND 4 GND Ground CLK3(2) 5 OUT Output clock VDD 6 PWR 2.5V Supply CLK4(2) 7 OUT Output clock CLKOUT (2) 8 OUT Output clock NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils.

COMMERCIAL TEMPERATURE RANGE IDT2305NZT 2.5V CLOCK BUFFER Symbol Parameter Min. Max. Unit VDD Supply Voltage 2.3 2.7 V TA Operating Temperature (Ambient Temperature) -40 +85 °C CL Load Capacitance 10MHz - 133MHz — 15 pF CIN Input Capacitance — 7 pF OPERATING CONDITIONS DC ELECTRICAL CHARACTERISTICS Symbol Parameter Conditions Min. Max. Unit VIL Input LOW Voltage Level — 0.7 V VIH Input HIGH Voltage Level 1.7 — V IIL Input LOW Current VIN = 0V — 50 µA IIH Input HIGH Current VIN = VDD — 100 µA VOL Output LOW Voltage Standard Drive, IOL = 8mA — 0.3 V VOH Output HIGH Voltage Standard Drive, IOH = -8mA 2 — V IDD_PD Power Down Current REF = 0MHz — 12 µA IDD Supply Current Unloaded Outputs at 66.66MHz — 32 mA SWITCHING CHARACTERISTICS (1,2) Symbol Parameter Conditions Min. Typ. Max. Unit t1 Output Frequency 15pF Load 10 — 133 MHz Duty Cycle = t 2 ÷ t1 Measured at VDD/2, FOUT = 66.66MHz 40 50 60 % t3 Rise Time Measured between 0.7V and 1.7V — — 2.5 ns t4 Fall Time Measured between 0.7V and 1.7V — — 2.5 ns t5 Output to Output Skew All outputs equally loaded — — 250 ps t6 Delay, REF Rising Edge to CLKOUT Rising Edge Measured at VDD/2 — 0 8.7 ns t7 Device-to-Device Skew Measured at VDD/2 on the CLKOUT pins of devices — 0 700 ps NOTES: 1. REF Input has a threshold voltage of V DD/2. 2. All parameters specified with loaded outputs.

COMMERCIAL TEMPERATURE RANGE IDT2305NZT 2.5V CLOCK BUFFER VDD OUTPUTS VDD GND GND 0.1µ F 0.1µ F CLOAD CLKOUT Test Circuit for All Parameters TEST CIRCUIT Output VDD /2 VDD /2 Output REF VDD/2 Output CLKOUT Device 1 CLKOUT Device 2 VDD/2 VDD/2 VDD/2 VDD /2 VDD /2 VDD /2 1.7V 0.7V t3 t4 0.7V 2.5V 1.7V Output All Outputs Rise/Fall Time Input to Output Propagation Delay Device to Device Skew Output to Output SkewDuty Cycle Timing SWITCHING WAVEFORMS

COMMERCIAL TEMPERATURE RANGE IDT2305NZT 2.5V CLOCK BUFFER Package Outline and P ackage Dimensions (8-pin SOIC, 150 Mil. Body) Millimeters Inches Symbol Min Max Min Max A 1.35 1.75 0.0532 0.0688 A1 0.1 0.25 0.004 0.0098 B 0.33 0.51 0.013 0.02 C 0.19 0.25 0.0075 0.0098 D 4.8 5 0.189 0.1968 E 3.8 4 0.1497 0.1574 e H 5.8 6.2 0.2284 0.244 h 0.25 0.5 0.01 0.02 L 0.4 1.27 0.016 0.05 a 0° 8° 0° 8° 1.27 BASIC 0.050 BASIC

COMMERCIAL TEMPERATURE RANGE IDT2305NZT 2.5V CLOCK BUFFER

Ordering Information

P art / Order Number Shipping Packaging Package Temperature 2305NZT-1DCG Tubes 8-pin SOIC 0 to +70° C 2305NZT-1DCG8 Tape and Reel 8-pin SOIC 0 to +70° C 2305NZT-1DCGI Tubes 8-pin SOIC -40 to +85° C 2305NZT-1DCGI8 Tape and Reel 8-pin SOIC -40 to +85° C "G" after the two-letter package code denotes Pb free configuration, RoHS complaint.

© 202 Renesas Electronics Corporation. All rights reserved. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use o any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. ('LVFODLPHURev.1.0 Mar 2020) Corporate Headquarters Contact Information TOYOSU FORESIA, 3-2-24 Toyosu, For further information on a product, technology, the most Koto-ku, Tokyo 135-0061, Japan up-to-date version of a document, or your nearest sales www.renesas.com office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners.