IDSS

IDSS SAMTEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 2

Technical content

SERIES ROW OPTION - NO. PINS PER ROW - IDM = Standard Tail Male Plug IDS = Socket S = Single D = Double (Color coded cable Not available for 31 thru 36 pins/row. See –G option.) –02 thru –32 = IDMS/IDMD –02 thru –36 = IDSS/IDSD SPECIFICATIONS Insulator Material: Black Glass Filled Polyester Contact (IDSS/IDSD): BeCu Terminal (IDMS/IDMD): Phosphor Bronze Plating: Au over 50 µ" (1.27 µm) Ni or Sn over 100 µ" (2.54 µm) Cu or 50 µ" (1.27 µm) Ni Wire:

28 AWG 7/36 stranded

Current Rating (IDMD):

3 A per pin

(2 pins powered) Temperature Range: -20 °C to +105 °C (Rainbow Cable) -40 °C to +105 °C (Gray Cable) Voltage Rating:

425 VAC/600 VDC

Lead Size Range: (0.56 mm) .022" SQ to (0.71 mm) .028" SQ Lead Insertion Depth: (5.59 mm) .220" to (6.22 mm) .245" IDSS/IDMS/IDMD Mates: TSW, MTSW, TSM, EJH, PHT, HMTSW, HTSW, HW, DW, EW, ZW, MTLW IDSD Mates: TSS, HTSS, ZSS, EJH Note: This Series is non-standard, non-returnable. IDSS (Single) IDSD (Double) Double End (—D) Transfer End (—T)Single End (—S) IDMS (Single) IDMD (Double) (For square or long tail see HCMX Series) ALSO AVAILABLE Molded-To-Position IDC Assembles Low Profile Skinny side locks Dual beam contacts Single and double row (6.35mm) .025" square and (5,84mm) .230" length tail available Visit samtec.com?HCSD, samtec.com?HCSS, samtec.com?HCMD or samtec.com?HCMS for more detailed information. IDMX shown IDSX shown SLIM BODY FLAT RIBBON IDC CABLES (2.54 mm) .100" PITCH • IDSS/IDSD/IDMS/IDMD SERIES Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. DOUBLE Full size (64 positions): (82.55) 3.250 SINGLE Full size (32 positions): (81.53) 3.210 (2.54) .100 (5.08) .200 DOUBLE Full size (72 positions): (92.71) 3.650 SINGLE Full size (36 positions): (91.69) 3.610 (9.27) .365 REF (5.08) .200(2.54) .100 F-221 (Rev22DEC22) samtec.com?IDSS, samtec.com?IDSD, samtec.com?IDMS or samtec.com?IDMD

• END ASSEMBLY - ASSEMBLED LENGHTH - OPTION = Single End (Socket or Male Plug on one end) = Double End (Socket or Male Plug on each end) = Transfer End (Male Plug on one end with socket on other. Begin part number with IDM) –“XX.XX” = Assembled Length = Tin Plating (Both Ends) = Tin IDM, 10 µ" (0.25 µm) Gold IDS (-T End Assembly Required) = Tin IDS, 10 µ"(0.25 µm) Gold IDM (-T End Assembly Required) –P “XX” =Polarized Specify “XX” as position. For Double the same position will be polarized on both ends. (Not available on IDM unless transfer, then only the socket is polarized.) = Gray Cable Specify –G for Gray cable. Gray cable has one red edge. IDSS and IDMS uses (2.54 mm) .100" centerline cable. IDSD and IDMD uses (1.27 mm) .050" centerline cable. Cable is 28 AWG 7/36 copper wire. Standard cable is same as above except color –ST “X” = Stripped & Tinned (Specify Suffix from table) (All dimensions are ± 1/16" (1.59 mm) (Not available in 28 positions and higher) –B “XX” = Breakout (Specify “XX” as number of conductors to be broken out) (Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side) –RW = Reversed Wiring (#1 wire opposite position #1) –S “XX” = Daisy Chain, Single (When mating double row connector with two single row connectors, the outer most single will be connected to Conductor #1 and the inside single to Conductor #2) –D “XX” = Daisy Chain, Double –W “XX” = Wiring Reverse Daisy Chain, Single (Same as –S “XX” except outer strip connected to Conductor #2 and inside strip connected to Conductor #1) = Reverse = Middle Reverse (Requires –SXX, –WXX or –DXX) = Outside Reverse (Requires –SXX, –WXX or –DXX) Reverse (—R) Middle Reverse (—M) Outside Reverse (—O) –ST8 1/8" (3.18) –ST4 1/4" (6.35) –ST2 1/2" (12.70) –ST3 3/8" (9.53) Stripped & Tinned (—ST “X”) Assembled Length in INCHES (±1/8" ) (2 inches minimum) Breakout (—B “X”) “XX” 5"max. 2"min. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. min. 4" minimum Double Row Connectors (IDSD or IDMD) Outer Most 0204 0103 Polarized (—P “XX”) Daisy Chain SIngle (—S “XX”) Assembled Length (—“XX.XX”) Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice. F-221 (Rev22DEC22)samtec.com?IDSS, samtec.com?IDSD, samtec.com?IDMS or samtec.com?IDMD