IDSD-03-D-06.00-T

IDSD-03-D-06.00-T SAMTEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

(2.54 mm) .100" IDMD–24–D–12.00–G WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. For complete specifications see www.samtec.com?IDSS, www.samtec.com?IDSD, www.samtec.com?IDMS or www.samtec.com?IDMD Insulator Material: Black Glass Filled Polyester Plating: Au over 50 µ" (1.27 µm) Ni or Sn over 100 µ" (2.54 µm) Cu or 50 µ" (1.27 µm) Ni Wire:

28 AWG 7/36 stranded

Temperature Range: -20 °C to +105 °C (Rainbow Cable) -40 °C to +105 °C (Gray Cable) Contact (IDSS/IDSD): BeCu Terminal (IDMS/IDMD): Phosphor Bronze Current Rating (IDSD/TST):

3.4 A per pin

(1 position powered per row) Current Rating (IDMD):

3 A per pin

(1 position powered per row) Contact Resistance: 15 mW Lead Size Range: (0.56 mm) .022" SQ to (0.71 mm) .028" SQ Lead Insertion Depth: (5.59 mm) .220" to (6.22 mm) .245" RoHS Compliant: Ye s END ASSEMBLY ROW OPTION NO. PINS PER ROW TYPE STRIP –02 thru –32 –02 thru –36 IDM = Standard Tail Male Plug IDS = Socket Mates with: TSW, MTSW, TSM, EJH, PHT, HMTSW, HTSW, HW, DW, EW, ZW, MTLW IDSD Mates with: TST, HTST, ZST, BST, EJH IDMD (Double) S = Single D = Double (Color coded cable N/A for 31 thru 36 pins/row. See –G option.) IDMS (Single) DOUBLE Full size (72 positions): (92.71) 3.650 Less than 72 positions: SINGLE Full size (36 positions): (91.69) 3.610 Less than 36 positions: (2.54) .100 (0.76) .030 SQ (9.27) .365 REF (5.08) .200 (2.54) .100 IDSD (Double) IDSS (Single) Socket or Male Plug on one end Male Plug on one end with socket on other. Begin part number with IDM. –T = Transfer End Note: This Series is non-standard, non-returnable. (0.48) .019 DOUBLE Full size (64 positions): (82.55) 3.250 Less than 64 positions: SINGLE Full size (32 positions): (81.53) 3.210 Less than 32 positions: (0.46) .018 x (0.48) .019 (2.54) .100 (2.54) .100 (2.54) .100 (5.08) .200 (6.10) .240 MAX (3.18) .125 (For square or long tail see HCMX Series) SPECIFICATIONS –S = Single End –D = Double End Socket or Male Plug on each end SLIM BODY FLAT RIBBON IDC CABLES OTHER SOLUTIONS F-217 Molded-To-Position IDC Assemblies

• Low profile
• Skinny side locks
• Dual beam contacts
• Single and double row
• (3.05 mm) .120" and (5.84 mm) .230" length tail available Call Samtec for HCXX Series. For complete scope of recognitions see www.samtec.com/quality RECOGNITIONS FILE NO. E111594

IDSS, IDSD, IDMS, IDMD SERIES IDSD–24–S–05.00 IDSD–05–D–04.25–S02 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. SLIM BODY FLAT RIBBON IDC CABLES EJECTOR HEADERS & LOCKING CLIPS See EJH Series. LOCKING CLIP PC BOARD IDSS or IDSD STRIP ASSEMBLY .025" SQ TERMINAL STRIP (TSW) See TSW Series. When mating double row connector with two single row connectors, the outer most single will be connected to Conductor #1 and the inside single to Conductor #2. 1/8" (3.18) 1/4" (6.35) 1/2" (12.70) 3/8" (9.53) –ST8 –ST4 –ST2 –ST3 “XX” 5"max. 2"min. = Outside Reversed OPTIONASSEMBLED LENGTH –P “XX” =Polarized = Reversed –D “XX” = Daisy Chain, Double –ST “X” = Stripped & Tinned –S “XX” = Daisy Chain Single = Gray Cable Specify –G for Gray cable. Gray cable has one red edge. IDSS and IDMS uses .100" centerline cable. IDSD and IDMD uses .050" centerline cable. Cable is 28 AWG 7/36 copper wire. Standard cable is same as above except color coded. Specify “XX” as position. For Double the same position will be polarized on both ends. (Not available on IDM unless transfer, then only the socket is polarized.) Standard plating is selective gold over BeCu contact for IDS; Selective gold over phosphor bronze for IDM. –W “XX” = Wiring Reversed Daisy Chain, Single Same as –S “XX” except outer strip connected to Conductor #2 and inside strip connected to Conductor #1. 0204 0103 Assembled Length in INCHES (±1/8" ) (2 inches minimum) Specify Suffix from table. All dimensions are ± 1/16". Not available in 28 positions and higher. –B “XX” = Breakout Specify “XX” as number of conductors to be broken out. Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. = Middle Reversed –RW = Reversed Wiring #1 wire opposite position #1. min. 4" minimum Connectors (IDSS) Outer Most min. 4" minimum Double Row Connectors (IDSD or IDMD) Outer Most Optional polarizing key for use with IDSS & IDSD Series. Also polarizes SSW, SSQ, ESW & ESQ Series. Black High Temperature Thermoplastic Order: Part Number PK-01-06 (Available in wheels of six each) = Reversed (5.84) .230 (0.64) .025 SQ = Tin Plating (Both ends) Tin IDM 10 µ" (0.25 µm) Gold IDS (-T End Assembly Required) 10 µ" (0.25 µm) Gold IDM Tin IDS (-T End Assembly Required) – “XX.XX” = Assembled Length POLARIZING KEY

• Ejector headers
• Locking clips Requires –SXX, –WXX or –DXX Requires –SXX, –WXX or –DXX