IDS-242GT-I ORING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
IDS-242GT-I+ is an innovative secure 4 port RS-422/485 to 2 ports Gigabit Ethernet secure device server with standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. Further, IDS-242GT-I+ features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. IDS-242GT-I+ supports RS-422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. In addition, wide operating temperature, -40~70 o C, and rugged IP-30 housing design, IDS-242GT-I+ series could operate in the harsh industrial environment. Therefore, IDS- 242GT-I+ is the best solution to the high demand of secure serial to Ethernet critical data communication. Introduction Industrial 4-port secure serial to Ethernet device server with 4xRS- 422/485(2KV isolation) and 2x10/100/1000Base-T(X), 1-port PoE P .D. ▪ Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Modbus Gateway ▪ Support Modbus Gateway : Modbus TCP, Modbus RTU, Modbus ASCII ▪ Support 2 Gigabit Ethernet ports for high speed data transmission ▪ Security: SSL data encryption; secured management by HTTPS and SSH ▪ 1KV isolation for PoE P.D. port ▪ 2KV isolation for serial port ▪ Supports 9K Bytes Jumbo Frame ▪ Event Warning by Syslog, SNMP trap, Relay ▪ Configurable by Web-based and Windows utility (DS-Tool) ▪ Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit) In practical operation of serial device servers, Windows utility (DS-Tool) is supported. This utility is very helpful for you to manage and monitor all of industrial device servers on the industrial network. Practical Operation Multiple Host PCs IDS-242GT-I+ RS-422/485 SSL Data Encryption Data Encryption Data Encryption Data Encryption Credit Card Machine IDS-242GT-I+ RS-422/485 TCP Client/Server Modes IDS-242GT-I+ RS-422/485 IDS-242GT-I+ RS-422/485 TCP Client Config Through Com Port TCP Server IDS-242GT-I+
Designed for Rugged Excellence 3-73 3-73 Industrial Ethernet Switch Industrial Media Converter Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Device Server Industrial Device Server 4-Port Device Server v1.0 / Apr, 2017 DS-Tool (Windows Utility): Monitoring and Configuration interface Pin Assignment Pin # RS-422 RS-485 ( 4 wire ) RS-485 ( 2 wire )
1 TXD + TXD + DATA +
2 TXD - TXD - DATA -
3 RXD + RXD +
4 RXD - RXD -
5 GND GND GND
5-Pin Terminal block connector 1 2 3 4 5 Dimensions Unit=mm Specifications ORing Switch Model IDS-242GT-I+ Physical Ports 10/100/1000 Base-T(X) Ports in RJ45 2 Auto MDI/MDIX Present at ETH2 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min Serial Ports Connector 5 pin terminal block x 4
www.oring-networking.com3-74 Industrial Device Server 4-Port Device Server v1.0 / Apr, 2017 Operation Mode RS-422/485 Serial Baud Rate 110 bps to 921.6 Kbps Data Bits 7, 8 Parity odd, even, none, mark, space Stop Bits 1, 1.5, 2 RS-422 TxD+, TxD-, RxD+, RxD-,GND RS-485 (4-wire) TxD+, TxD-, RxD+, RxD-,GND RS-485 (2-wire) DATA+, DATA-, GND Isolating 2KV Flow Control XON/XOFF , RTS/CTS, DTR/DSR Network Protocol Protocol ICMP , IP , TCP , UDP , DHCP , BOOTP , SSH, DNS, SNMP V1/V2c, HTTPS Jumbo frame Up to 9.6K Bytes LED indicators Power indicator PWR 1(2) / Ready: Green On: Power is on and functioning Normally. 10/100/1000 RJ45 port indicator Top Green for port Link at 1000Mbps, Amber for port Link at 100Mbps, off for port Link at 10Mbps Bottom Green for port Link/Act Serial TX / RX LEDs: Red: Serial port is receiving data Green: Serial port is transmitting data Power Redundant Input power Dual DC inputs. 12-48VDC on 6-pin terminal block Power consumption (Typ.) 6.96 W Overload current protection Present Reverse polarity protection Present on terminal block Physical Characteristic Enclosure IP-30 Weight (g) 705g Environmental Storage Temperature -40 to 85 o C (-40 to 185 o Operating Temperature -40 to 70 o C (-40 to 158 o Operating Humidity 5% to 95% Non-condensing Regulatory approvals EMI FCC Part 15 B, CISPR (EN55032) class A EMS EN61000-4-2 (ESD) EN61000-4-3 (RS) EN61000-4-4 (EFT) EN61000-4-5 (Surge) EN61000-4-6 (CS) EN61000-4-8 EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years
Designed for Rugged Excellence 3-75 3-75 Industrial Ethernet Switch Industrial Media Converter Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Network Management Software Accessories Industrial Device Server Industrial Device Server 4-Port Device Server v1.0 / Apr, 2017 Available Model Model Name Description IDS-242GT-I+ Industrial 4-port secure serial to Ethernet device server with 4x RS-422/485(2KV isolation) and 2x10/100/1000Base-T(X), 1-port PoE P .D. Packing List ‧IDS-242GT-I+ x 1 ‧DIN-rail Kit x 1 ‧CD x 1 ‧Wall-mount Kit x 1 ‧Quick Installation Guide x 1 Optional Accessories ‧DR-45 series : 45 Watts power supply ‧DR-120 series : 120 Watts power supply ‧DR-75 series : 75 Watts power supply IDS-2 A B CC - D E
Ordering Information
Code Definition Serial Port Type Serial Port Number Serial Port Number Serial Port Number 10/100Base-T(X) port Number Serial Port Number Option - 1: RS-232 - 2: RS-422/485 - 4: 4 ports - 2: 2 ports - GT: Gigabit Ethernet - I: Serial port are isolated RS-422/485 - "+": PoE P .D. present at ETH2