ID1A-6S-2.54SF HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
17.4 2.45 30.6 I Features 1.Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber identification with portable telephone terminals of the GSM system for which standards have been unified. The ID1A Series of sockets are suited for use with GSM standard (11.11) plug-in SIM cards. 2. Miniature and Thin These sockets are miniature and thin with a height of 2.45 mm, length of 30.6 mm, and width of 17.4 mm. The weight has been reduced by 30% compared with our existing products. (See Photograph (1).) 3. Suited to Automatic Mounting The board mounting method is of the surface mount type.In addition to the standard tray packaging specification, an embossed tape specification suited to automatic mounting is also available. 4.Prevention of Incorrect Insertion to the Board A board-positioning boss prevents incorrect insertion to the board by means of boss position and boss diameter. 5.Slide Lock System An original lock structure securely holds the SIM card and easy opening and closing of the card holder is another feature. (See Photograph (2).) I Applications Portable terminals and equipment that use GSM Standard (11.11) plug-in SIM cards. Miniature and Thin Photograph (1) Can be locked by moving the slider. Upside down insertion of the SIM card is prevented through the establishment of a polarity. LOCK OPEN Slide Lock System Photograph (2) Slider Card holder Contacts Housing Structure and Names of the Parts Photograph (3)
-30çto +80ç(NOTE 1) Operating humidity range 40 to 80% Storage temperature -10çto +60ç(NOTE 2) Storage humidity 40 to 70% (NOTE 2) Item Specification Conditions 1. Insulation resistance1000M ohms min. No flashover or insulation breakdown. 40 m ohms max. No electrical discontinuity of 10 µs or more Contact resistance 60 mohms max. Insulation resistance 100 Mohms min. Contact resistance 60 m ohms max. Insulation resistance 100 M ohms min. Contact resistance of 60 mohms max. No deformation of components affecting performance.
100 V DC
500 V AC / 1 minute
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% Temperature: -55ç: 30 min. --> 15 to 35ç: 5 min. MAX --> 85ç: 30 min --> 15 to 35ç: 5 min. MAX) for 5 cycles 5000 cycles Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds 2. Withstanding voltage 3. Contact resistance 4. Vibration 5. Humidity (Steady state) 6. Temperature cycle 7. Durability (Insertion/withdrawal) Insulator Contacts Card holder Slider Synthetic resin Color : Black UL94V-0 UL94V-0 UL94V-0 ______Contact portion: Gold plating Lead portion: Solder plating Color : Black Color : Beige Phosphor bronze Synthetic resin Synthetic resin 8. Resistance to Soldering heat Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Part Material Finish Remarks I Materials G Ordering Information ID1A - 6 S - 2.54 SF (21) 1 2 3 4 5 6 Series Name: ID1A Number of contacts: 6 Contact type S: Socket Contact pitch: 2.54 mm Terminal type SF: SMT type Packaging type Blank: Tray packaging (21): Embossed tape packaging
0°~180° 1.18±0.2 17.4±0.3 (0.65) (2.1)(4.82) (9.09) (5.7)(21.5) 15.8±0.1 7.62±0.2 (23.15) (2.9) (1.1) (23.02) 27.2±0.2 (1.1) 0.25t±0.05 ∞0.5w±0.05 2.45±0.3 12±0.1 (12) (10) 2.54±0.2 1.36±0.2 2.54±0.2 17.4±0.3 (1.39) No.3 No.7 No.5 ContactNo.1 29.2±0.3 Protruding portion Amount of sliding(1.5) SIM CARD (GSM 11.11) OPEN LOCK OPEN LOCK (Ø1.5 (Ø1) With the card holder closed With the card holder open 1 When locking, slide the protruding portion of the slider after the card holder has been closed. 2 The co-planarity at the SMT lead tip portion is 0.1 maximum. 3 indicates a 7.62 ±0.2 center line.$L 645-0003-9 645-0003-9-21 NOTE 1: Embossed tape packaged items are sold by the reel with 500 pieces per reel. ID1A-6S-2.54SF ID1A-6S-2.54SF(21) Tray Embossed tape (NOTE 1) 500 pieces per reel CL No.Part Number Number of Contacts Packaging type Number of Pieces
Reflow system: IR reflow Solder type: Cream type 63 Sn/37 Pb (Flux component 9 wt%) Test board: Glass epoxy 85 x 60 x 1 mm Metal mask thickness: 0.15 mm Conditions may change and are dependent on type and thicness of solder. BPCB mounting pattern BTemperature Profile 15.4±0.11.5 Min. 1.3 Min. 1.3 Min. 22.2 Min. 11.5±0.1 15.8±0.05 19.7±0.05 3.9±0.05 6.4 Min. 4.3±0.1 1.1±0.1 2.45±0.05 5.08±0.05 12±0.05 2.1±0.05 1.5 Min. 1.1 Min. Pattern prohibited area Connector mounting position Shaded portions [///] indicate pattern prohibited areas.1 0.4±0.1 Ø1.6 +0.1 Ø1.1+0.1 0 5 s max. 240ç 200ç 160ç 150ç 25ç(60 s) 60 to 90 s (30 s) (20 to 30 s) Soldering timePreheating time Time (Seconds) Start 60 100 150 200 250 Temperature(ç) 120
I Embossed Carrier Tape Dimensions Unreeling direction 4±0.1 2±0.15 24±0.1 1.75±0.120.2±0.1 44±0.3 40.4±0.1 (2.8) (0.9) Ø1.5 +0.1 1.7 +0.15+0 1.5+0.1 Ø13±0.5 (2) (Ø330) (Ø80) (44.5) G Reel Dimensions
I Method of Using the Sockets 1. Part Structure and Names Please see Photograph (3) on C39 page. 2. Opening the Holder Cover Press the slider and at the same time move it in the direction marked "OPEN". This action will release the lock and free the card holder. Remove the SIM card (as shown) so that it comes out from the card holder. 3. Closing the Holder Cover Insert the SIM card to the card holder. Close the card holder, press the slider, and at the same time move it in the direction marked "LOCK" on the card holder. A click sound will indicate that the lock has been engaged. Align the slit of the SIM card with the polarity position. Polarity
1) When opening the card holder with a SIM card inserted, avoid the action of directly lifting the SIM card and releasing the lock. Doing so will cause damage to the lock structure. 2) The card holder is based on a structure that moves only in the turning direction. Avoid pulling or applying unreasonable force in other directions. 3) Do not close the card holder when the slider is protruding from the card holder. Doing so will cause damage to the lock structure. (Please refer to the photographs below.) 4) A lock that is not fully engaged will cause poor contact. 5) Do not perform hot-line insertions. (NOTE 1) NOTE 1: The term hot-line insertion means performing an insertion while the electricity is supplied. 2) Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. 3) Washing Precautions Residual flux or cleaning agent on the sockets when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. 1) Organic Solvent Washing The slider is protruding from the card holder. IPA (Isopropyl alcohol) HCFC (Hydrochlorofluorocarbon) Yes Yes Yes Yes Solvent Normal temperature washing Heated washing Ye s N o