ID100 DIGITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

144 Market Street

phone +1.908.245-7200 ID100-ID106 SILICON CONTROLLED RECTIFIER 0 . 5 A M P Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol ID100 ID101 ID102 ID103 ID104 ID105 ID106 Unit Repetitive peak off state voltage VDRM 30 60 100 150 200 300 400 Volts Repetitive peak reverse voltage VRRM 30 60 100 150 200 300 400 Volts DC on-state current 75°C ambient 100°C case IT 250 0.5 mA Amps Repetitive peak on-state current ITRM 6 Amps Peak one cycle surge (non-repetitive) on-state current ITSM Up to 30 Amps Peak gate current IGM 250 mA Average gate current IG(AV) 25 mA Reverse gate voltage VGR 6 Volts Storage temperature range Tstg -65 to 150 °C Operating temperature range TJ -65 to 125 °C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristics Symbol Min Typ Max Unit Test Condition Off-state current (ID100-ID104) - 5.0 50 µA VDRM = rating, RGK = 1K, T = 125°C Off-state current (ID105-ID106) IDRM - 10.0 100 µA VDRM = rating, RGK = 1K, T = 125°C Reverse current (ID100-ID104) - 10.0 50 µA VRRM = rating, RGK = 1K, T = 125°C Reverse current (ID105-ID106) IRRM - 15.0 100 µA VRRM = rating, RGK = 1K, T = 125°C - 5.0 200 µA VD = 5V, RGS = 10K Gate trigger current IGT - - 500 µA VD = 5V, RGS = 10K, T = -40°C 0.40 0.55 0.8 V VD = 5V, RGS = 100Ω - - 1.0 V VD = 5V, RGS = 100Ω, T =- -40°C Gate trigger voltage VGT 0.10 - - V VD = 5V, RGS = 100Ω, T = 125°C Peak on-state voltage VTM - - 1.7 V IT = 1A (pulse) - 1.0 5.0 mA RGK = 1K Holding current IH - - 10.0 mA RGK = 1K, T = -40°C Turn-on time ton - 0.5 - µs IG = 10mA, IT = 1A, VD = 30V Circuit commutated turn-off time (ID100-ID104) - 8.0 - µs IT = IR = 1A, RGK = 1KΩ Circuit commutated turn-off time (ID105-ID106) tq - 15.0 - µs IT = IR = 1A, RGK = 1KΩ Blocking voltage ratings apply over the full operating temperature range, provided the gate is connected to the cathode through an appropriate resistor, 1000 ohms or smaller, or other adequate gate bias is used. sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130116

phone +1.908.245-7200 ID100-ID106 SILICON CONTROLLED RECTIFIER 0 . 5 A M P MECHANICAL CHARACTERISTICS Case TO-18 Marking Alpha-numeric Pin out See below TO-18 Inches Millimeters Min Max Min Max A 0.209 0.230 5.310 5.840 B 0.178 0.195 4.520 4.950 C 0.170 0.210 4.320 5.330 D 0.016 0.021 0.406 0.533 E - 0.030 - 0.762 F 0.016 0.019 0.406 0.483 G 0.100 BSC 2.540 BSC H 0.036 0.046 0.914 1.170 J 0.028 0.048 0.711 1.220 K 0.500 - 12.700 - L 0.250 - 6.350 - M 45°C BSC 45° BSC N 0.050 BSC 1.270 BSC P - 0.050 - 1.270 sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130116

phone +1.908.245-7200 ID100-ID106 SILICON CONTROLLED RECTIFIER 0 . 5 A M P sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130116

phone +1.908.245-7200 ID100-ID106 SILICON CONTROLLED RECTIFIER 0 . 5 A M P sales@digitroncorp.com fax +1.908.245-0555 www.digitroncorp.com Rev. 20130116