IB0503S-W75R3 MORNSUN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
IB05_S-W75R3 Series 2018.09.27-A/2 Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation 0.75W isolated DC-DC converter with Fixed Input Voltage and Regulated Single Output Patent Protection RoHS
FEATURES
Continuous short-circuit protection No-load input current as low as 5mA Operating ambient temperature range -40℃ to +85℃ High efficiency up to 74% I/O isolation test voltage 3k VDC Industry standard pin-out Compact SIP package Designed to meet UL/EN62368 (Approval Pending) IB05_S-W75R3 series are especially designed for distributed power supply systems where an isolated voltage is required. They are suitable for: pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Certification Part No. Input Voltage (VDC) Output Full Load Efficiency(%) Min./Typ. Capacitive Load (µF) Max.Nominal (Range) Voltage (VDC) Current (mA) Max./Min. UL/CE (Approval Pending) IB0503S-W75R3 (4.75-5.25) 3.3 200/20 64/68 2400 IB0505S-W75R3 5 150/15 68/72 2400 IB0509S-W75R3 9 83/9 68/72 1000 IB0512S-W75R3 12 62/7 69/73 560 IB0515S-W75R3 15 50/5 70/74 560 Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) 3.3VDC/5VDC output -- 209/5 221/10 mA 9VDC/12VDC output -- 208/12 221/20 15VDC output -- 202/18 215/30 Reflected Ripple Current* -- 15 -- Input Filter Capacitance Filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Min. Typ. Max. Unit Voltage Accuracy -- -- ±3 % Linear Regulation Input voltage change: ±1% -- -- ±0.25 % Load Regulation 10%-100% load 3.3VDC output -- -- ±3 Other outputs -- -- ±2 Ripple & Noise* 20MHz bandwidth -- 30 75 mVp-p Temperature Coefficient 100% load -- ±0.02 -- %/℃ Short-circuit Protection Continuous, self-recovery Note: * The “parallel cable” method is used for Ripple and Noise test, please refer to DC-DC Converter Application Notes for specific information.
IB05_S-W75R3 Series 2018.09.27-A/2 Page 2 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output Electric Strength Test for 1 minute with a leakage current of 1mA max. 1500 -- -- VDCInput-output Electric Strength Test for 1 second with a leakage current of 1mA max. 3000 -- -- Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature up to 71℃ (see Fig. 2) -40 -- 85 Storage Temperature -55 -- 125 Case Temperature Rise Ta=25℃ 3.3VDC output -- 30 -- Other outputs -- 25 -- Pin Soldering Resistance Temperature Soldering spot is 1.5mm away from case for 10 seconds -- -- 300 Storage Humidity Non-condensing -- -- 95 %RH Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Switching Frequency 100% load, nominal input voltage -- 270 -- KHz MTBF MIL-HDBK-217F@25℃ 3500 -- -- K hours Mechanical Specifications Case Material Black plastic flame-retardant and heat-resistant (UL94 V-0) Dimensions 11.60 x 6.00 x 10.16mm Weight 1.3g(Typ.) Cooling Method Free air convection Electromagnetic Compatibility (EMC) Emissions CE CISPR32/EN55032 CLASS B (see Fig. 3 for recommended circuit) RE CISPR32/EN55032 CLASS B (see Fig. 3 for recommended circuit) Immunity ESD IEC/EN61000-4-2 Air ±8kV, Contact ±4kV perf. Criteria B Typical Characteristic Curves 120 100 -40 0 40 85 120 Outp ut Power Percent( %) Amb ient Temp.( )℃ Saf e Op erati ng Area Temp er atur e D erating Cur ve Fig. 1
IB05_S-W75R3 Series 2018.09.27-A/2 Page 3 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Design Reference 1. Typical application circuit Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig.2 Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1. Vin GND +Vo DCCin DC Cout Fig. 2 Table 1：Recommended input and output capacitor values Vin(VDC) Cin(µF) Vo (VDC) Cout(µF) 5 4.7 3.3/5 10 -- -- 9/12 2.2 -- -- 15 1 2. EMC compliance circuit Fig. 3 Table 2：Recommended EMC filter values Input voltage 5VDC Output voltage (VDC) 3.3/5/9 12/15 EMI C1/C2 4.7µF /25V 4.7µF /25V CY -- 1nF/4KVDC VISHAY HGZ102MBP TDK CD45-E2GA102M-GKA C3 Refer to the Cout in table 1 LDM 6.8µH 6.8µH Note: We recommend the use of a Y-capacitor CY with a value of 1nF/4kV to help even further reduce EMI.. 3. For additional information please refer to DC-DC converter application notes on www.mornsun-power.com.
IB05_S-W75R3 Series 2018.09.27-A/2 Page 4 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Dimensions and Recommended Layout Notes: 1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58200003; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load; 5. All index testing methods in this datasheet are based on our Company’s corporate standards; 6. We can provide product customization service, please contact our technicians directly for specific information; 7. Products are related to laws and regulations: see "Features" and "EMC"; 8. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. MORNSUN Guangzhou Science & Technology Co., Ltd. Tel: 86-20-38601850 Fax: 86-20-38601272 E-mail: sales@mornsun.cn www.mornsun-power.com