IAS012YG POWER-ONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % EFF. (18v) EFF. (24v) EFF. (36v) Setpoint Accuracy ±1% Line Regulation Vin Min. - Vin Max., Iout Rated ±0.2% V out Load Regulation Iout Min. - Iout Max., Vin Nom. ±0.5% V out Minimum Output Current 10 % I out Rated Dynamic Regulation, Loadstep 25% I out Pk Deviation 4% V out Settling Time 500 mS Voltage Trim Range ±10% Short Circuit / Overcurrent Protection Shutdown / Hiccup Current Limit Threshold Range, % of I out Rated 110 - 140% TECHNICAL SPECIFICATIONS IAS DC/DC converters provide up to 12 watts of output power in an industry-standard package and footprint. With a maximum case temperature of 100°C, the IAS is well suited for the most demanding applications. The IAS features 1500 VDC isolation, short circuit, and overtemperature protection, as well as six-sided shielding. The IAS is available with optional enable and voltage trim pins. Please see the IAD series for dual output applications. Industry Standard Package Industry Standard Footprint Up to 12W Output 100°C Case Operation Optional Trim and Enable Wide Range Input 1500V Isolation Short Circuit Protection
DESCRIPTION
FEATURES
Efficiency vs. Load (24V Input) Turn-On Time 10 mS Remote Shutdown Positive Logic Switching Frequency 375 kHz Isolation Input - Output 1500 VDC Input - Case (24 Vin) 1050 VDC Output - Case (48 Vin) 500 VDC Temperature Coefficient ±0.03%/°C Case Temperature Operating Range -40 To +100°C Storage Range -55 To +115°C Humidity Max., Non-Condensing 95% Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz MTBF† (Bellcore Tr-nwt-000332) 2.1 X 10 6 hrs Safety UL, cUL, VDE Weight (Approx.) 1.0 oz † MTBF predictions may vary slightly from model to model. Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment. Output General Notes IAS SERIES - 12 WATT Voltage Range
24 VDC Nominal 18 - 36 VDC
48 VDC Nominal 34 - 75 VDC
Input Reverse Input Current Shunt Diode Input REV. 08/30/01
MODEL INPUT VOLTAGE INPUT VOLTAGE MAXIMUM INPUT OUTPUT RATED OUTPUT RIPPLE & NOISE TYPICAL (VOLTS) RANGE (VOLTS) CURRENT (AMPS)* VOLTAGE (VOLTS) CURRENT (AMPS) pk-pk (mV) EFFICIENCY** IAS012YG 24 18-36 0.81 12 1.0 120 85% IAS012YH 24 18-36 0.81 12 1.0 120 85% IAS012YJ 24 18-36 0.79 15 0.8 150 86% IAS006ZE 48 34-75 0.26 3.3 2.0 75 75% IAS010ZG 48 34-75 0.36 5 2.0 75 81% IAS012ZH 48 34-75 0.43 12 1.0 120 85% IAS012ZJ 48 34-75 0.43 15 0.8 150 86% NOTES: * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. Thermal Impedance Tolerances Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. Pin Function 1+ V in 2- V in
3 No Pin
(Shutdown) 4+ V out
5 No Pin
(Trim) 6- V out Natural Convection 15.4 °C/W 100 LFM 12.2 °C/W 200 LFM 9.3 °C/W 300 LFM 7.4 °C/W 400 LFM 6.4 °C/W Inches: (Millimeters) Pin: ± 0.002 ± 0.05 Case: (Dimensions as listed unless otherwise specified.) MODELS - (See the last page of Section for options.) /K28/K31/K2E/K30/K6D/K6D/K29 /K44/K49/K41 /K30/K2E/K30/K34/K30/K22 /K28/K34/K2E/K36/K6D/K6D/K29 /K30/K2E/K31/K38/K22 /K4D/K49/K4E/K2E /K28/K31/K30/K2E/K37/K6D/K6D/K29 /K30/K2E/K34/K32/K22 /K31/K2E/K30/K30/K22 /K28/K35/K30/K2E/K38/K6D/K6D/K29 /K32/K2E/K30/K30/K22 /K30 /K31/K2E/K34/K30/K22/K28/K33/K35/K2E/K36/K6D/K6D/K29 /K30/K2E/K38/K30/K30/K22/K28/K32/K30/K2E/K33/K6D/K6D/K29 /K28/K32/K35/K2E/K34/K6D/K6D/K29 /K42/K4F/K54/K54/K4F/K4D /K56/K49/K45/K57 /K35/K36 /K32/K31 /K33 /K34 /K30 /K28/K32/K32/K2E/K39/K6D/K6D/K29 /K30/K2E/K39/K30/K30/K22 /K28/K32/K30/K2E/K33/K6D/K6D/K29 /K30/K2E/K38/K30/K30/K22 /K28/K31/K32/K2E/K37/K6D/K6D/K29 /K30/K2E/K35/K30/K30/K22 /K28/K31/K30/K2E/K32/K6D/K6D/K29 /K30/K2E/K34/K30/K30/K22 /K28/K37/K2E/K36/K6D/K6D/K29 /K30/K2E/K33/K30/K30/K22 MECHANICAL DRA WING
/K57/K68/K65/K6E /K6F/K72/K64/K65/K72/K69/K6E/K67 /K65/K71/K75/K69/K70/K6D/K65/K6E/K74 /K6F/K70/K74/K69/K6F/K6E/K73/K2C /K75/K73/K65 /K74/K68/K65 /K66/K6F/K6C/K6C/K6F/K77/K69/K6E/K67 /K73/K75/K66/K66/K69 /K78 /K69/K6E/K66/K6F/K72/K6D/K61/K74/K69/K6F/K6E/K2E /K53/K65/K6C/K65/K63/K74 /K74/K68/K65 /K6F/K70/K74/K69/K6F/K6E/K28/K73/K29 /K74/K68/K61/K74 /K79/K6F/K75 /K70/K72/K65/K66/K65/K72 /K61/K6E/K64 /K61/K64/K64 /K74/K68/K65/K6D /K74/K6F /K74/K68/K65 /K6D/K6F/K64/K65/K6C /K6E/K75/K6D/K62/K65/K72/K2E /K45/K78/K61/K6D/K70/K6C/K65 /K6F/K72/K64/K65/K72/K69/K6E/K67 /K6F/K70/K74/K69/K6F/K6E/K73 /K61/K72/K65 /K6C/K6F/K63/K61/K74/K65/K64 /K62/K65/K6C/K6F/K77 /K74/K68/K65 /K6F/K70/K74/K69/K6F/K6E/K73 /K74/K61/K62/K6C/K65/K2E /K4F/K50/K54/K49/K4F/K4E /K53/K55/K46/K46/K49/K58 /K41 /K50/K50/K4C/K49/K43/K41 /K42/K4C/K45 /K53/K45/K52/K49/K45/K53 /K52/K45/K4D/K41 /K52/K4B/K53 /K4E/K65/K67/K61/K74/K69/K76/K65 /K4C/K6F/K67/K69/K63 /K4E /K48/K41/K53/K2C /K48/K42/K44/K2C /K48/K42/K53/K2C /K48/K45/K53/K2C /K48/K4C/K53/K2C /K4C/K45/K53/K2C /K51/K42/K53/K2C /K51/K45/K53/K2C /K51/K4C/K53/K2C /K54/K45/K53/K2C /K54/K51/K44 /K54/K54/K4C /K93/K4C/K6F/K77/K94 /K54/K75/K72/K6E/K73 /K4D/K6F/K64/K75/K6C/K65 /K4F/K4E /K54/K54/K4C /K93/K48/K69/K67/K68/K94 /K54/K75/K72/K6E/K73 /K4D/K6F/K64/K75/K6C/K65 /K4F/K46/K46 /K4C/K75/K63/K65/K6E/K74/K2D/K43/K6F/K6D/K70/K61/K74/K69/K62/K6C/K65 /K54/K72/K69/K6D /K54 /K48/K41/K53/K2C /K48/K42/K44/K2C /K48/K42/K53/K2C /K48/K45/K53/K2C /K48/K4C/K53/K2C /K51/K42/K53/K2C /K51/K45/K53/K2C /K51/K4C/K53 /K54/K65/K72/K6D/K69/K6E/K61/K6C /K53/K74/K72/K69/K70 /K54/K53 /K58/K57/K53/K2C /K58/K57/K44/K2C /K58/K57/K54 /K54/K72/K69/K6D /K31 /K49/K41/K53/K2C /K4C/K45/K53 /K45/K6E/K61/K62/K6C/K65 /K32 /K49/K41/K44/K2C /K49/K41/K53/K2C /K4C/K45/K53/K2C /K53/K4D/K53 /K54/K72/K69/K6D /K61/K6E/K64 /K45/K6E/K61/K62/K6C/K65 /K33 /K49/K41/K53/K2C /K4C/K45/K53 /K43/K75/K72/K72/K65/K6E/K74 /K53/K68/K61/K72/K65 /K34 /K53/K4D/K53 /K48/K65/K61/K64/K65/K72/K6C/K65/K73/K73 /K59 /K45/K6E/K63/K61/K70/K73/K75/K6C/K61/K74/K65/K64 /K45/K57/K53/K2C /K49/K57/K53/K2C /K4F/K57/K53 /K50/K49/K4E /K4C/K45/K4E/K47/K54/K48 /K41 /K4E/K44 /K48/K45/K41 /K54/K53/K49/K4E/K4B /K4F/K50/K54/K49/K4F/K4E/K53 /K53/K74/K61/K6E/K64/K61/K72/K64 /K50/K69/K6E /K4C/K65/K6E/K67/K74/K68 /K69/K73 /K30/K2E/K31/K38/K30/K94 /K28/K34/K2E/K36/K6D/K6D/K29 /K30/K2E/K31/K31/K30/K94 /K28/K32/K2E/K38/K6D/K6D/K29 /K50/K69/K6E /K4C/K65/K6E/K67/K74/K68 /K38 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K53/K4D/K53/K29 /K30/K2E/K31/K35/K30/K94 /K28/K33/K2E/K38/K6D/K6D/K29 /K50/K69/K6E /K4C/K65/K6E/K67/K74/K68 /K39 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K53/K4D/K53/K29 /K30/K2E/K32/K34/K94 /K28/K36/K2E/K31/K6D/K6D/K29 /K48/K6F/K72/K69/K7A/K6F/K6E/K74/K61/K6C /K48/K65/K61/K74/K73/K69/K6E/K6B /K31/K48 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K44/K49/K50/K2C /K48/K4C/K53/K2C /K48/K4C/K44/K2C /K51/K4C/K53/K2C /K53/K49/K50/K2C /K53/K4D/K2C /K54/K4C/K44/K2C /K61/K6E/K64 /K54/K4B/K44 /K50/K61/K63/K6B/K61/K67/K65/K73/K29 /K49/K6E/K63/K6C/K75/K64/K65/K73 /K54/K68/K65/K72/K6D/K61/K6C /K50/K61/K64 /K30/K2E/K32/K34/K94 /K28/K36/K2E/K31/K6D/K6D/K29 /K56/K65/K72/K74/K69/K63/K61/K6C /K48/K65/K61/K74/K73/K69/K6E/K6B /K31/K56 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K44/K49/K50/K2C /K48/K4C/K53/K2C /K48/K4C/K44/K2C /K51/K4C/K53/K2C /K53/K49/K50/K2C /K53/K4D/K2C /K54/K4C/K44/K2C /K61/K6E/K64 /K54/K4B/K44 /K50/K61/K63/K6B/K61/K67/K65/K73/K29 /K49/K6E/K63/K6C/K75/K64/K65/K73 /K54/K68/K65/K72/K6D/K61/K6C /K50/K61/K64 /K30/K2E/K34/K35/K94 /K28/K31/K31/K2E/K34/K6D/K6D/K29 /K48/K6F/K72/K69/K7A/K6F/K6E/K74/K61/K6C /K48/K65/K61/K74/K73/K69/K6E/K6B /K32/K48 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K44/K49/K50/K2C /K48/K4C/K53/K2C /K48/K4C/K44/K2C /K51/K4C/K53/K2C /K53/K49/K50/K2C /K53/K4D/K2C /K54/K4C/K44/K2C /K61/K6E/K64 /K54/K4B/K44 /K50/K61/K63/K6B/K61/K67/K65/K73/K29 /K49/K6E/K63/K6C/K75/K64/K65/K73 /K54/K68/K65/K72/K6D/K61/K6C /K50/K61/K64 /K30/K2E/K34/K35/K94 /K28/K31/K31/K2E/K34/K6D/K6D/K29 /K56/K65/K72/K74/K69/K63/K61/K6C /K48/K65/K61/K74/K73/K69/K6E/K6B /K32/K56 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K44/K49/K50/K2C /K48/K4C/K53/K2C /K48/K4C/K44/K2C /K51/K4C/K53/K2C /K53/K49/K50/K2C /K53/K4D/K2C /K54/K4C/K44/K2C /K61/K6E/K64 /K54/K4B/K44 /K50/K61/K63/K6B/K61/K67/K65/K73/K29 /K49/K6E/K63/K6C/K75/K64/K65/K73 /K54/K68/K65/K72/K6D/K61/K6C /K50/K61/K64 /K30/K2E/K39/K35/K94 /K28/K32/K34/K2E/K31/K6D/K6D/K29 /K48/K6F/K72/K69/K7A/K6F/K6E/K74/K61/K6C /K48/K65/K61/K74/K73/K69/K6E/K6B /K33/K48 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K44/K49/K50/K2C /K48/K4C/K53/K2C /K48/K4C/K44/K2C /K51/K4C/K53/K2C /K53/K49/K50/K2C /K53/K4D/K2C /K54/K4C/K44/K2C /K61/K6E/K64 /K54/K4B/K44 /K50/K61/K63/K6B/K61/K67/K65/K73/K29 /K49/K6E/K63/K6C/K75/K64/K65/K73 /K54/K68/K65/K72/K6D/K61/K6C /K50/K61/K64 /K30/K2E/K39/K35/K94 /K28/K32/K34/K2E/K31/K6D/K6D/K29 /K56/K65/K72/K74/K69/K63/K61/K6C /K48/K65/K61/K74/K73/K69/K6E/K6B /K33/K56 /K41/K6C/K6C /K55/K6E/K69/K74/K73 /K28/K45/K78/K63/K65/K70/K74 /K44/K49/K50/K2C /K48/K4C/K53/K2C /K48/K4C/K44/K2C /K51/K4C/K53/K2C /K53/K49/K50/K2C /K53/K4D/K2C /K54/K4C/K44/K2C /K61/K6E/K64 /K54/K4B/K44 /K50/K61/K63/K6B/K61/K67/K65/K73/K29 /K49/K6E/K63/K6C/K75/K64/K65/K73 /K54/K68/K65/K72/K6D/K61/K6C /K50/K61/K64 /K45/K78/K61/K6D/K70/K6C/K65 /K4F/K70/K74/K69/K6F/K6E/K73/K3A /K48/K42/K53/K30/K35/K30/K5A/K47/K2D/K41/K4E/K54/K33/K56 /K3D /K48/K42/K53/K30/K35/K30/K5A/K47/K2D/K41 /K77/K69/K74/K68 /K6E/K65/K67/K61/K74/K69/K76/K65 /K6C/K6F/K67/K69/K63/K2C /K4C/K75/K63/K65/K6E/K74/K2D/K63/K6F/K6D/K70/K61/K74/K69/K62/K6C/K65 /K74/K72/K69/K6D/K2C /K61/K6E/K64 /K30/K2E/K39/K35/K94 /K76/K65/K72/K74/K69/K63/K61/K6C /K68/K65/K61/K74/K73/K69/K6E/K6B/K2E /K4C/K45/K53/K30/K31/K35/K59/K4A/K2D/K33/K4E /K3D /K4C/K45/K53/K30/K31/K35/K59/K4A /K77/K69/K74/K68 /K6F/K70/K74/K69/K6F/K6E/K61/K6C /K74/K72/K69/K6D /K61/K6E/K64 /K65/K6E/K61/K62/K6C/K65/K2C /K6E/K65/K67/K61/K74/K69/K76/K65 /K6C/K6F/K67/K69/K63/K2E /K51/K42/K53/K30/K36/K36/K5A/K47/K2D/K41/K54/K38 /K3D /K51/K42/K53/K30/K36/K36/K5A/K47/K2D/K41 /K77/K69/K74/K68 /K4C/K75/K63/K65/K6E/K74 /K63/K6F/K6D/K70/K61/K74/K69/K62/K6C/K65 /K74/K72/K69/K6D /K61/K6E/K64 /K30/K2E/K31/K31/K30/K94 /K70/K69/K6E /K6C/K65/K6E/K67/K74/K68/K2E NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Po wer-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change dependin g on the date manufactured. Specifications are subject to change without notice. OPTIONS