IAP-420 ORING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
High Speed Air Connectivity: WLAN interface support up to
150 Mbps link speed
Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported Provide 2 port 10/100Base-T(X) Ethernet ports Support X-Roaming < 100 ms Support AP/Client/Bridge/AP-Client Mode Support Multiple-SSID to 4 SSID Secured Management by HTTPs Wireless connecting status monitoring Event Warning by Syslog, Email, SNMP Trap 1KV isolation for PoE P.D. port of IAP-420+ Rigid IP-30 housing design DIN-Rail and Wall-mount enabled IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network. IAP-420 / IAP-420+ Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)
- All specifications are subject to change without notice. Designed for Rugged Excellence Application In practical operation of wireless access point, Windows utility (Open-Vision) is supported. This utility is very helpful for you to search and configure IP of access point on the industrial network. In addition, the wireless access point support various kinds of operation modes include AP/ Bridge/Repeater/AP-Client mode. IAP-420 / IAP-420+ series also support PoE P.D. feature to extend the layout up to 100 meters. You can build up the wireless network easily. Dimension
- All specifications are subject to change without notice. Designed for Rugged Excellence Specifications ORing WLAN Access Point Model IAP-420 IAP-420+ Physical Ports 10/100 Base -T(X) P orts in RJ45 Auto MDI/MDIX PoE P.D. port - Present at ETH1 Fully compliant with IEEE 802.3af Power Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min WLAN interface Operating Mode AP/Bridge/AP-Client Antenna Connector 1 x External reverse SMA-type antenna connector Radio Frequency Type DSSS, OFDM Modulation IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM Frequency Band America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) Transmission Rate 802.11b: 1/2/5.5/11 Mbps 802.11n(40MHz): UP to 150 Mbps Transmit Power 802.11b: 13.5dBm ± 1.5dBm 802.11g: 13.5dBm ± 1.5dBm 802.11n(2.4G@20MHz): 13.5dBm ± 1.5dBm 802.11n(2.4G@40MHz): 13.5dBm ± 1.5dBm Receiver Sensitivity 802.11b: -90dBm ± 2dBm@1Mbps 802.11g: -72dBm ± 2dBm@54Mbps 802.11n(2.4G@40MHz,MCS7): -68dBm ± 2dBm Encryption Security WEP: (64-bit, 128-bit key supported) WPA/WPA2:802.11i (WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported TKIP encryption Wireless Security SSID broadcast disable and enable Protocol Support Protocol ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP LED indicators Power indicator LED x 3, PWR 1, 2, (PoE): Green On: Power is on and functioning Normally. 10/100Base-T(X) RJ45 port indicator LED x 2 , Green for port Link/Act at 100Mbps. WLAN LEDs WLAN Link /ACT: Green: Blinking Power Redundant Input power Dual DC inputs. 12~48VDC on 4 -pin terminal block
- All specifications are subject to change without notice. Designed for Rugged Excellence Power consumption (Typ.) 4watts Overload current protection Present Reverse polarity protection Present Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 41(W)x81(D)x95(H) mm Weight (g) 292 297 Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -10 to 60oC (14 to 140oF) Operating Humidity 5% to 95% Non-condensing Regulatory approvals EMI FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000 -4-3 (RS), EN61000 -4-4 (EFT), EN61000 -4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 3 years
- All specifications are subject to change without notice. Designed for Rugged Excellence
Ordering Information
Code Definition Wireless Mode 10/100 Base-T(X) Port Number PoE Identification Option - 1: 802.11 b/g - 2: 802.11 a - 3: 802.11 a/b/g - 4: 802.11 b/g/n - 5: 802.11 a/n -"2": 2 ports -"+": PoE P.D. present at ETH1 Available Model Model Name Description IAP-420_US Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), US band IAP-420_EU Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), EU band IAP-420+_US Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., US band IAP-420+_EU Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., EU band Packing List O Optional Accessories O IAP-420/420+ x 1 Antenna x 1 Quick Installation Guide x 1 Wall-Mount Kit x 1 CD x 1 Din-Rail Kit x 1 DR-45 series : 45 Watts power supply DR-120 series : 120 Watts power supply RF Antenna Base (Magnetic) series RF Surge Protector DR-75 series : 75 Watts power supply WLAN RF Antenna (Omni-directional) series RF Cable series