IAD010YGG POWER-ONE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

(888) IPD-CONVerters G (888) 473-2668 G www.ipdconverters.com C-70 10 20 30 40 50 60 70 80 90 100 LOAD % EFFICIENCY % EFF. IAD010ZGG EFF. IAD012ZHH EFF. IAD012ZJJ DESCRIPTION FEATURES IAD SERIES - DUAL OUTPUT, 12 WATT  Industry Standard Package  Industry Standard Footprint  Fixed Frequency Design  100°C Case Operation  Optional Trim and Enable  Wide Range Input  1500V Isolation  Short Circuit Protection IAD dual output DC/DC converters provide up to 12 Watts of output power in an industry standard package and footprint. With a maximum case temperature of 100°C, the IAD is well suited for the most demanding applications. The IAD features 1500 VDC isolation, short circuit, and overtemperature protection, as well as six-sided shielding. The IAD is available with optional enable and voltage trim pins. Please see the IAS series for single output applications. Efficiency vs. Load (48V Input) General Turn-On Time 300 ms Remote Shutdown Positive Logic Switching Frequency 400 kHz Isolation Input - Output 1500 VDC Output - Case (for 48 V in) 500 VDC Input - Case (for 24 V in) 1050 VDC Temperature Coefficient ±0.03%/°C Case Temperature Operating Range -40 To +85°C Storage Range -40 To +110°C Humidity Max., Non-Condensing 95% Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz MTBF † (Bellcore TR-NWT-000332) 1.8 X 10 6 hrs Safety UL, CUL, VDE Weight (Approx.) 1.2 oz Notes † MTBF predictions may vary slightly from model to model. †† Industrial temp range available Specifications typically at 25°C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment. TECHNICAL SPECIFICATIONS Voltage Range

24 VDC Nominal 18 - 36 VDC

48 VDC Nominal 34 - 75 VDC

Input Reverse Voltage Protection Shunt Diode Input Output Setpoint Accuracy ±1% Auxillary Setpoint Accuracy 5 % Line Regulation V in Min. - V in Max., I out Rated 0.5% V out Load Regulation I out Min. - I out Max., V in Nom. 1.0% V out Minimum Output Current 10 % I out Rated Dynamic Regulation, Loadstep 25% I out Pk Deviation 4% V out Settling Time 500 µs Voltage Trim Range ±10% Short Circuit / Overcurrent Protection Hiccup Power Limit Threshold Range 110 - 150%

Natural Convection 15.4 °C/W 100 LFM 12.2 °C/W 200 LFM 9.3 °C/W 300 LFM 7.4 °C/W 400 LFM 6.4 °C/W Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. IAD SERIES - DUAL OUTPUT, 12 WATT MECHANICAL DRA WING 1+ V in 2- V in

3 Optional

5 Common

Inches: (Millimeters) Pin: ± 0.002 ± 0.05 Case: (Tolerances as listed unless otherwise specified.) MODELS - (See the last page of this file for options.) Vin (Volts) Vin Range (Volts) Iin Max.* (Amps) Vout (Volts) Iout Rated (Amps) Ripple & Noise Pk-Pk (mV) Efficiency Typ. ** Model 18 - 36 18 - 36 18 - 36 34 - 75 34 - 75 34 - 75 0.80 0.85 0.85 0.40 0.43 0.42 ±12 ±15 ±12 ±15 ±1.0 ±0.5 ±0.4 ±1.0 ±0.5 ±0.4 120 150 120 150 77% 82% 83% 78% 82% 83% IA D 010Y GG † IA D 012Y HH IA D 012Y JJ † IA D 010Z GG IA D 012Z H H IA D 012Z JJ † Denotes advanced product release. Consult factory for product availability. * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. /K44/K49/K41 /K30/K2E/K30/K34/K30/K22 /K28/K31/K2E/K30/K6D/K6D/K29 /K30/K2E/K31/K38/K22 /K4D/K49/K4E/K2E /K28/K34/K2E/K36/K6D/K6D/K29 /K30/K2E/K34/K32/K22 /K28/K31/K30/K2E/K37/K6D/K6D/K29 /K31/K2E/K30/K30/K22 /K28/K32/K35/K2E/K34/K6D/K6D/K29 /K32/K2E/K30/K30/K22 /K28/K35/K30/K2E/K38/K6D/K6D/K29 /K30 /K30/K2E/K38/K30/K30/K22/K28/K32/K30/K2E/K33/K6D/K6D/K29 /K42/K4F/K54/K54/K4F/K4D /K56/K49/K45/K57 /K31/K2E/K34/K30/K22/K28/K33/K35/K2E/K36/K6D/K6D/K29 /K33/K32 /K31 /K34/K36 /K35 /K30 /K30/K2E/K33/K30/K30/K22 /K28/K37/K2E/K36/K6D/K6D/K29 /K30/K2E/K34/K30/K30/K22 /K28/K31/K30/K2E/K32/K6D/K6D/K29 /K30/K2E/K35/K30/K30/K22 /K28/K31/K32/K2E/K37/K6D/K6D/K29 /K30/K2E/K38/K30/K30/K22 /K28/K32/K30/K2E/K33/K6D/K6D/K29 /K30/K2E/K39/K30/K30/K22 /K28/K32/K32/K2E/K39/K6D/K6D/K29

When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION SUFFIX APPLICABLE SERIES REMARKS Negative Logic N HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD TTL “Low” Turns Module ON TTL “High” Turns Module OFF Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES Term inal Strip TS XW S, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180” (4.6mm) 0.110” (2.8mm) Pin Length 8 All Units (Except SMS) 0.150” (3.8mm) Pin Length 9 All Units (Except SMS) 0.24” (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.24” (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45” (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95” (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.